ZHUOYUE PX-02 Bluetooth Audio Atmosphere Lamp User Manual

ZHUOYUE PX-02 Bluetooth Audio Atmosphere Lamp

Please read the user manual carefully before using this product

Product Information

The device is designed to comply with part 15 of the FCC Rules. It operates under the following conditions:

1. It should not cause harmful interference.
2. It must accept any interference received, even if it may cause undesired operation.

Any changes or modifications made to this device without explicit approval from the manufacturer may void your authority to operate the equipment.

Product Usage Instructions

1. Ensure that the device is properly connected to a power source or battery, as specified in the user manual.
2. Place the device in an appropriate location, ensuring proper ventilation and adequate space around it.
3. Refer to the user manual for any specific installation or setup instructions, if applicable.
4. Power on the device using the designated power button or switch.
5. Follow the on-screen prompts or menu options, if applicable, to configure the device settings according to your preferences.
6. If any interference occurs during operation, the device is designed to accept it and continue functioning. However, if the interference is causing undesired operation, consider adjusting the device’s location or contacting the manufacturer for further assistance.
7. Regularly refer to the user manual for maintenance guidelines and safety precautions.

PRODUCT INTRODUCTION

1. Ambient Light
2. Electroplated Decoration
3. Wireless Charging
4. Phone Stand
5. Charging Indicator Light
6. Key
7. Speaker
8. USB Interface
9. Type-C Charging Port

HOW TO CHARGE

Product Charging

1. Connect the complimentary power adapter cable to the product Type-C interface for charging.
2. When the product is powered on, the red indicator light will be on, indicating that it is charging. The green indicator light will be on when the product is fully charged.
3. When the product is powered on, USB can charge the phone.

Wireless Charging of Mobile Phone

BLUETOOTH CONNECTION

BLUETOOTH CONNECTION (Device Name: PCXC 5002)

Bluetooth Pairing

1. Press and hold the M button, Bluetooth pairing and resetting, and there will be a prompt tone.
2. Then turn on the Bluetooth function of your mobile phone and select “PCXC5002” from the list of Bluetooth devices. It will automatically pair. After the pairing is successful, there will be a prompt tone.

MUSIC AND AMBIENT LIGHT OPERATION

Playing Music

1. Briefly press the power button to pause/play music.
2. Briefly press the volume down button to play the previous track.Long press the volume down button to decrease the volume.
3. Briefly press the volume up button to play the next track.Long press the volume up button to increase the volume.

Ambient Light Operation

1. Briefly press the M key to cycle through RGBW ambient light colors, light off.
2. Briefly press the light brightness key to cycle through streamer mode.
3. Press and hold the light brightness key to cycle through brightness modes of 40%-60%-80%-100%-off.

BUTTON FUNCTION

BUTTON OPERATION METHOD

Power Button

• Press and hold the power button to turn on/off the device, and there will be a prompt tone.
• Briefly press the power button to play/pause music.

Volume Down Button —

• Briefly press the volume down button to play the previous track.
• Long press the volume down button to decrease the volume.

Light Mode Button M

• Briefly press the M key to cycle through RGBW ambient light colors,light off.
• Press and hold the “M” button for Bluetooth pairing and resetting.

Volume Up Button +

• Briefly press the volume up button to play the next track.
• Long press the volume up button to increase the volume.
• With a beeping sound indicating when the volume has reached its maximum.

Brightness Button

• Briefly press the light brightness key to cycle through streamer mode.
• Press and hold the light brightness key to cycle through brightness modes of 40%60%-80%-100% -off.

BASIC PARAMETER

• Model: PX-02
• Electric Current: 2A
• Rated Power: 18W
• Wireless Power: 10W
• Speaker Power: 5W*1
• Origin: Shenzhen China
• Dimension: 8.66 x 4.35 x 9.29 (inch)
• Input Voltage: DC 9V
• Material: ABS/ Silica/ PCBA/PC
• Compliance: GB4706. 1-2005
  • GB4706. 48-2009

Electronic Device Hazardous Substances Declaration

• o: Indicates that the content of hazardous substance in this specific component is below the requirement in GB/T 26572 regulation.
• ×: Indicates that the content of hazardous substance in this specific component is above the requirement in GB/T 26572 regulation.

The hazardous substances and any corresponding components shown in this table will not cause any harm to human and the environment under normal use of the product. This table is to provide relevant instructions to consumers and recycling practitioners, for proper disposal reference.

Precautions

ATTENTION POINTS

• The Pro magnet model supports horizontal and vertical charging of mobile phones.
• The normal model supports horizontal charging and vertical charging for phones larger than 6.4 inches, and vertical charging for phones smaller than 6.4 inches.
• To use wireless charging, make sure your phone has wireless charging capabilities.
• Use the QC3.0 adapter for best results.
• Please avoid thick cases (>0.07 inches) and other accessories when charging your device.
• Mobile phones below iPhone8 do not support wireless charging, such as iPhone5, 5S, 6, 6S, and 7.
• Do not use or store the product in direct sunlight or high-temperature places for a long time.
• Do not charge in places too close to magnetic cards, magnetic recording media, and precision instruments.
• Do not disassemble or modify this product.
• Keep this product away from water or other liquids.
• If you want to clean the product, please disconnect the power.

PACKAGE

• Wireless Charging Music Lamp/ x 1
• Power Adapter/ x 1
• Power Cord/ x 1
• User Manual/ x 1

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>