Jaybird RUN 985-000688 True Wireless Headphones-User Guide

June 4, 2024
jaybird

**

Jaybird-logoJaybird RUN 985-000688 True Wireless Headphones**

**

Jaybird-RUN-985-000688-True-Wireless-Headphones-
Product**

Introduction

WELCOME

JAYBIRD RUN TRUE WIRELESS SPORT HEADPHONES

SECURE + COMFORT-FIT INTERCHANGEABLE TIPS & FINS FOR ALL EAR SIZES

SWEAT-PROOF + WATER RESISTANT

4 HOUR PLAYTIME WITH ONE CHARGE + 8H WITH INCLUDED CHARGE CASE

CUSTOM SOUND PUMP UP THE BASS, OR CRANK THE TREBLE, & NEVER MISS A CALL

BLUETOOTH® – CONNECTION TIPSJaybird-RUN-985-000688-True-Wireless-
Headphones-fig-2

Your right Jaybird RUN earbud is the master (main)  earbud. The right earbud pairs and connects to your  audio device and to the left earbud. For best Bluetooth performance, try to reduce the  distance between your right earbud and your audio  device. For example, try to have your audio device  in your right pocket or on your right arm if running  with an arm band.

PRODUCT OVERVIEW

Jaybird-RUN-985-000688-True-Wireless-Headphones-
fig-3

WHAT’S IN THE BOX

Jaybird-RUN-985-000688-True-Wireless-Headphones-
fig-4

Accessories can also be purchased online at jaybirdsport.com

**FIT

Jaybird-RUN-985-000688-True-Wireless-Headphones-
fig-5
**

Try different combinations of ear tips and fins. The right selection will deliver a great sound and give you a secure comfort-fit that allows you to forget you’re wearing them.

CHARGING – BUDS
Jaybird Run offers you 4 hours of playtime when fully charged.  The Charge Case gives you two additional recharge cycles or 8 hours additional playtime.

CHARGING YOUR BUDS

Your buds will start charging as soon as you place  them into the Charge Case and close the lid. The left  and right LED’s will indicate the charging status for about  10 seconds when not plugged into power.

  • Green LED pulses = charging
  • Green LED solid = fully charged

A 5 minute charge gives you up to 1 hour of playtime. A full charge can take up to 2 hours if charging from low battery

CHARGING – CHARGE CASE

To charge the Charge Case use the provided USB cable and plug it into a USB power supply. The LED in the middle of the Charge Case will indicate the charging status of the case as well as the earbuds.

  • Green LED pulses = charging
  • Green LED solid = fully charged

When the charge case runs low on battery the LED will turn red for about 10 seconds on opening or closing the lid.Jaybird-RUN-985-000688-True-Wireless-
Headphones-fig-7

A full charge can take up to 3 hours.

CONTROLS – ON/OFF

Removing your earbuds from the charge case will automatically turn them on while placing them into the charge case will turn them off.

When not in the case, your buds automatically power down after about 30 minutes of non use.

You can also manually turn your earbuds on or off.

OFF –  Pressing on either the left or right button for 3 seconds will turn off both buds.

ON – A single press on each bud for 3 seconds will turn them on.

POWER ON – LED turns solid green for about 2.5 seconds POWER OFF – LED glows solid red for 1.5 seconds

PAIRING –  LED blinks green continuously in pairing mode and turns off once connected to a music device or upon reaching timeout (5 min)

CONTROLS – MUSIC & CALLSJaybird-RUN-985-000688-True-Wireless-Headphones-
fig-9

*You can customize single press functions within the Jaybird app.

CONTROLS – PAIRING

To pair to another device follow the steps below.

  1. Turn off the right bud by pressing the multi-function button for 3 seconds.
  2. Enter pairing mode by pressing the multi-function button for 6 seconds.

**JAYBIRD APP

**

The Jaybird App lets you customize the sound profile on your buds.

Your new sound settings are saved right on your buds, so you can play your custom sound on any device – no matter where you go with any device you use.

**EQUALIZER

Jaybird-RUN-985-000688-True-Wireless-Headphones-
fig-14**

NOTE : The Jaybird app  works with Jaybird Run,  X3 and Freedom. Other manufacturers and older Jaybird buds are not supported. Adding additional bass to your sound profile  through the Jaybird app  will reduce play time.

**SETTINGS

Jaybird-RUN-985-000688-True-Wireless-Headphones-
fig-15**

**HOW TO RESET

Jaybird-RUN-985-000688-True-Wireless-Headphones-
fig-16**

  1. To reset your buds to their original factory settings, put your buds in pairing mode by turning the buds off.
  2. Push and hold the multi-function button on the right bud for about 6 seconds, until you see the LED flash green.
  3. Now press the button twice. Upon successful factory reset, the LED will turn orange and your buds will turn off.
  4. Once your buds have been reset they will automatically go into pairing mode once powered on. Select “Forget” or “Remove” Jaybird Run from your device’s Bluetooth menu and pair again.

LISTEN RESPONSIBLY

Avoid excessive volume levels and prolonged periods of listening. Prolonged listening at excessive volume levels may cause permanent hearing disability.

Do not use around road traffic.

CARE AND MAINTENANCE

Clean eartips regularly of dirt and wax buildup. To clean, remove eartips from earbuds, then gently wipe away dust and oil with a dry cloth, and/or use warm water and mild soap to remove buildup. Rinse and completely dry before reattaching.  Before charging, ensure earbuds are completely dry of sweat and water. Video instructions at jaybirdsport.com/support/run.

FAQs

Can you wear the Jaybird RUN while bathing?****

Use of the Jaybird RUN 985-000688 earphones while swimming, taking a shower, or close to water in a pool or ocean is not recommended. Please be warned that Bluetooth® cannot transfer via water.

Can one Jaybird RUN be used at a time?****

You can use the left or right earbud separately, yes. If you just use one earbud, keep the other one in the case for best results.

Jaybird runs last how long?****

3.8 hours is a good amount of time for the Jaybird Run’s battery to last, and its case provides around two more charges for a total of 12 hours. It works well for most applications and, if you don’t listen for long stretches continually, should last you the entire day.

How can I prevent my jaybirds from escaping?****

Ear hooks or over-the-ear/around-the-ear designs that clasp around your ears are what keep them in place. These are the ideal earbuds to use if you want to use headphones while participating in activities that require a lot of movement since they offer a better and more stable grasp than other types of earbuds.

Are Jaybirds water resistant?****

Yes, the Jaybird Vista earbuds can withstand water. You may swim laps in them because they are waterproof.

Is there a microphone on the Jaybird RUN?****

Like most Bluetooth headphones, the Jaybird Run 985-000688 inbuilt microphone is average and performs best for calls in quiet environments.

Why just one ear is receiving sound from my jaybirds?****

If you are unable to hear audio from the left Jaybird RUN bud, you may need to reconnect it to the right master bud. To link your left RUN bud, open the Bluetooth® settings on your device and delete Jaybird RUN from the list of connected devices.

What is the Jaybird RUN’s volume control mechanism?****

Launch the Jaybird app. After selecting the desired Preset or after picking the “Flat” Preset, click Customize. Holding down the mouse button allows you to drag the green EQ line upward. Before clicking the save button, give your changed Preset a new name. Press “Save.”

How should Jaybird RUN be worn?****

Your Jaybird RUN earbuds have been set up with simplicity in mind. Just take them out of the box, put them in your ears, and go.

On Jaybird headphones, where is the power button located?****

Press and hold the middle button until you hear an increasing “Power On” tone and the LED goes completely white.

How is a jaybird turned on?****

a single press with brevity. For 4 seconds, press. On / Off. To turn the X3 on or off, press and hold the power button for around 4 seconds. A voice prompt will say “POWER ON” or “POWER OFF.”

How can my Jaybird 985-000688 be reset?****

To make the LED flash green, press and hold the right multifunction button for 6 seconds while taking out your right headphone. Double clicks on the right multifunction button. The LED will start to flash orange and the earbud will stop operating. Your earbud has been reset; now.

Do Jaybirds Swim in the Water?****

The Jaybird Tarah earbuds should not be worn when bathing, swimming, or anywhere near water, including a pool or ocean. Please be warned that Bluetooth® cannot transfer via water. After being exposed to salty or chlorinated water, carefully wash the earphones with fresh water before using them.

How do jaybirds respond to a call?****

For an incoming call, just tap either earbud once. To end a call, just push either earbud once. To decline or reject a call, double-press one of the earbuds.

How does Jaybird locate my friends?****

Use the Jaybird app to locate your headphones. Find Your Buds will show you the last location your earphones were connected to your phone. Your phone determines location accuracy. Be aware that Find My Buds uses a very little amount of additional phone power and requires location access.

Video

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals