JAYBIRD F5 Wireless Headphones User Manual

June 12, 2024
jaybird

JAYBIRD F5 Wireless Headphones

JAYBIRD F5 Wireless Headphones

Specifications

  1. Model: F5
  2. Speaker Frequency: 20Hz-20kHz
  3. Charging time : 1-2 hrs
  4. Working range: 15 Ms
  5. Talking time/playtime: 3-4hrs
  6. Support profiles: HSP/HFP/A2DP/AVRCP
  7. Charging voltage: 5V DC

To charge the earphones

For the first time using, please fully charge the earphones and the power case . To charge the earphones ,Put the earphones into the power case(made sure the case has power) The indicators of the earphones turn red when the earphones are being charged. The indicators will be off automatically when the earphones are fully charged.

To charge the power case

To charge the power case, using the charging cable comes with the earphone, insert the Cable into the charging port and connect to a power source. The indicator on the case will flash alternately while under charging. The indicator will be off after fully charged. Please pull out the charging cable after the charging is completed.

Power on /off:
Manually turn on: Press and hold the earphone for 3s to turn on then will hear a tone then the indicators of earphones will flash red and blue alternately . (or slide them out from the power case .The earphones can be turned on automatically); Press and hold the earphone for 5s to turn off after hearing a tone(or put the earphone back to the power case).

Wireless mode

1. Both earphones connection:While both earphones turn on, both earphones could pair automatically. Once paired successful, then you will hear a tone,the indicator of one earphone will flash red and blue alternately ,the other one on indicating
2.Single earphone Connection:
Each earphone can be used individually. Turn on one of earphones, the indicator will flash red and blue alternately to get ready to pair. After paired then a tone will be heard, then could listen music and answer/reject the call via the earphone.

Cellphone connection

Follow the instruction of your mobile phone,turn on the Bluetooth function on your phone, search the device name “F5 ” and select it to connect then you could listen to the music and answer the call via the earphone.

How to use

  1. Active Voice assistant:
    unlocked your phone then press and hold the earphone for 2s to active Siri or voice assistant.(Each side of earphone with the same function)

  2. Answer/End/Reject the call:
    Answer the call :While the earphone connected to your cell phone tap the earphone once to answer while call comes in. Tap once again to end the call. Reject call: press and hold the earphones for 2s to reject the call.

  3. Play/Pause:
    During playing music,Tap the earphone once under playing to pause or play. (Both side with same function)

  4. Next track/Previous track:
    Next track: Triple tap the “R” earphone to next track Previous track:Triple tap the “L” earphone to previous track

Volume“+”and Volume”-”

  1. Volume “+”: Double taps the”L” earphone
  2. Volume“-” : Double tap the”R” earphone
  3. Remarks :
    While under single earphone mode, only with next track and volume“+”function.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals