Embr Labs Embr Wave 2 Immediate Menopause Hot Flash Relief Instructions

Embr Labs Embr Wave 2 Immediate Menopause Hot Flash Relief Instructions

Important Safety Instructions

• This product is designed to provide thermal comfort, not to regulate core body temperature. It is intended for use in moderate environments, and it is not designed as a replacement for clothing, air conditioning, or other traditional temperature solutions. Read this manual before using this product. Keep this manual in a safe location for future reference.

• This product is a consumer product and not a medical device intended to diagnose, treat, or cure any disease. If you have any medical condition that you believe could be affected by this product, consult with your physician prior to using the product. If you experience adverse reactions, immediately remove the system, stop using it, and consult with your physician.

• This product is designed to be worn on the wrist only. Different parts of the body have different thermal sensitivities. Use this product on other body locations at your own risk.

• The product’s warming feature should be used with care and common sense. DO NOT use this product in temperature settings that feel painful or uncomfortable. Exposure to hot surfaces may cause pain or skin damage.

• Using the heating mode continuously for long periods may result in the skin turning red due to prolonged heat exposure.

• This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.

• DO NOT submerge or expose for extended periods to water or wear while participating in water activities, e.g., swimming, waterskiing, surfing, etc.

• As with any electronic products, use care not to spill liquids into any part of the system. Liquids can cause failure and/or a fire hazard.

• DO NOT use this product if you have open wounds, sores, rashes, infection, or inflamed skin in or around the area of contact.

• The product band contains some nickel. Nickel exposure from these materials is unlikely, but customers with known nickel allergies should be attentive when wearing the product until they can determine they are not experiencing an allergic reaction.

• To reduce the risk of fire or electric shock, DO NOT expose the product to rain or moisture. DO NOT subject the product to mechanical shock. DO NOT expose products containing batteries to excessive heat (e.g., from storage in direct sunlight, fire, or the like).

• This device contains a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

• Use this product only with an agency-approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC). Use only with Embr-provided charger and USB cable. DO NOT leave the product on prolonged charge when not in use.

• Do not open, alter or attempt to repair this product. Failure to follow this safety precaution could result in serious injury or death.

• Consult with your doctor before using this product if you are pregnant. Keep this system out of the reach of children.

• The product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health, and the environment. For more information on disposal and recycling of this product, contact your local municipality or disposal service.

Warranty Information

1. Limited Warranty. The limited warranty set forth herein applies only to the Buyer, may be acted upon only by the Buyer, and may not be assigned, sold, or transferred to any third party. Embr warrants only to the Buyer that, for a period of one (1) year from delivery, the Product shall substantially conform to Embr’s published specifications as of the date of shipment. The limited warranty herein shall not apply to (i) any Product that has been customized, altered, or repaired by any person or entity other than personnel of Embr or personnel specifically authorized by Embr, (ii) any Product that has been subjected to abuse, misuse, damage, neglect, or accident beyond Embr’s published limitations for the Product or other causes external to the Products (including, without limitation, environmental conditions and power conditions), (iii) use of the Product in combination with products or software not supplied by Embr, (iv) any use or operation of the Product other than in accordance with Embr’s then-current published specifications and instructions for the Product, or (v) any non-conformities or defects notified by Buyer to Seller with respect to a Product after the expiration of the applicable warranty period for such Product.
2. Remedies. Buyer’s sole and exclusive remedy and Seller’s sole and exclusive liability for a breach of this limited warranty shall be, at Seller’s option, Seller’s use of its commercially reasonable efforts to repair or replace the non-conforming Product. If Embr is unable, after reasonable efforts, to repair or replace such substantially non-conforming Products, Embr, may, at its sole discretion, elect to refund of an amount not to exceed the actual payments received by Embr for such Product(s). Buyer shall not return any Product to Embr without an Embr-issued RMA number; Buyer shall contact Embr at support.embrlabs.com to request a return and to obtain directions for returns of Products. Shipping costs and the risk of loss for a returned defective Product with a proper RMA number shall be borne by Embr, and Embr shall assume the risk of loss while the Product is in the Embr facility. Products that are repaired or replaced by Embr shall be covered by this limited warranty for the remaining warranty period for such original Product.
3. Disclaimers. THIS LIMITED WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON- INFRINGEMENT) WITH RESPECT TO THE PRODUCTS, THE MANUFACTURE, SALE, SUPPLYING OR FAILURE OR DELAY IN SUPPLYING OF THE PRODUCTS, SERVICES RELATED THERETO OR THE USE, RESULTS OR DISPOSITION OF THE PRODUCTS. EMBR EXPRESSLY DISCLAIMS ALL WARRANTIES (WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL) WITH RESPECT TO THE RESULTS OBTAINED FROM THE PRODUCT. OUR PRODUCTS DO NOT PROTECT YOU FROM OVERHEATING OR ANY OTHER HEALTH OR SAFETY RISKS. YOU ARE SOLELY RESPONSIBLE FOR MAINTAINING YOUR OWN HEALTH AND SAFETY

Regulatory Information

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Changes or modifications not expressly approved by Embr Labs could void the user’s authority to operate the equipment.

This product conforms to all applicable EU directive requirements.

Made and Imported by Embr Labs. Inc.
24 Roland St Suite 102, Boston, MA, 02129 USA
embrlabs.com

Need help?
Contact our support team: support.embrlabs.com
We’d love to hear from you!

Embr Wave® 2
Device Model: WAVE2-DEVC-BLK ( E100), WAVE2-DEVC-RG (E101)
Charger Model: WAVE2-CHRG-BLK (E151), WAVE2-CHRG-RG (E152)

Pat: embrlabs.com/patents
FCC ID: 2ANTG-WAVE2DEVC
IC: 23206-WAVE2DEVC
CAN ICES-003(B)/NMB-003(B)

Licenses and notices associated with the software distributed with
this product are provided at embrlabs.com/wave2

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>