JAYBIRD X2 Premium Bluetooth Earbuds User Guide
- June 16, 2024
- jaybird
Table of Contents
USER GUIDE
X2 PREMIUM BLUETOOTH EARBUDS
THE CARRYING CASE
INSIDE THE CARRYING CASE
BASIC
Begin with the Traditional Under-ear fit option to determine size.
LEFT & RIGHT ORIENTATION
GREAT SOUND PERFORMANCE IS IN SELECTING THE RIGHT SIZE EARTIP
WE LOVE GREAT SOUND. MAKE SURE YOU HEAR IT.
Because everyone’s ears are different, be sure to try all sizes of eartips.
Only with the right size eartips will you enjoy a snug fit & premium sound
quality.
COMPLYTM
Premium Comply™ Foam ear tips exclusively designed for Jaybird X2 deliver
maximum noise isolation and comfort.
Pull ear back. Insert entire foam tip into ear.
Hold in place 15-30 sec for foam to expand and create a seal.
Secure-Fit: Expands to give you a custom fit and remarkable in-ear retention.
Your earbuds remain secure whether you’re in the gym, on the slopes, or on the
go.
Soft Comfort: Unique memory foam provides all-day comfort, while eliminating
in-ear irritation and fatigue.
Noise Blocking: Allows you to enjoy your music in noisy environments without
raising the volume.
Audio Experience: Creates an optimal seal and channels sound directly into the
ear canal, transforming your listening experience.
BACK IT UP WITH SECURE FIT EAR FINS.
The earbuds may slip out of your ear a little. You will lose bass when this
happens so use the secure fit ear fins to hold them in place for best sound.
SECURE-FIT
INSTALL YOUR PREFERRED SIZED SECURE FIT EAR FINS AS SHOWN.
Fitting / size selection guidance on next two pages.
SLIDE SECURE FIT EAR FINS ALL THE WAY BACK AND COVER LED
(don’t worry, LED glows clearly through the ear fin)
LOCK THE TIP OF THE EAR FIN INTO THE TOP OF THE BOWL OF THE EAR AS SHOWN.
You should have a snug fit with contact on the lower, back and top portions of
the bowl of the ear.
SOUND CHECK
PAIR (SET UP) HEADPHONES TO YOUR MUSIC DEVICE, PLAY MUSIC, AND TRY EACH SIZE
OF EARTIP TO FIND THE BEST FIT AND SOUND PERFORMANCE.
A proper seal is essential for you to fully appreciate the high quality audio
of X2.
NEED HELP PAIRING?
Full pairing details pages 29-32.
ENJOY
ADVANCED
Over-ear fit option
See jaybirdsport.com/manuals for tutorial
video
LEFT & RIGHT ORIENTATION
SECURE-FIT
TAKE YOUR PREFERRED SIZED SECURE FIT EAR FIN AND INSTALL IN REVERSE DIRECTION
WITH POINTED END NEXT TO CORD.
IMPORTANT: Check your size preference in under-ear mode first as it can be
difficult to tell in overear mode, and may be different to other Jaybird
products.
CORD MANAGEMENT CLIPS
OVER-EAR MODE REQUIRES LESS CORD, SO BEFORE FITTING, INSTALL THE CORD
MANAGEMENT CLIPS TO SECURE THE SLACK FOR A CUSTOMIZED FIT.
MAKE AN “S” SHAPE WITH THE MIDDLE SECTION OF THE CORD.
INSERT CORD INTO 2 OF THE 3 SLOTS IN EACH CLIP AS SHOWN OMITTING THE FINAL ROUNDED SLOTS.
— Put the headphones on, using index finger to push the tip of the ear fin
into place to secure earbuds (a mirror helps the first time).
— With earbuds secured, adjust position of cord managers (pulling too tight
will of course dislodge earbuds, keep a little slack).
Take off headphones, insert cord into the final rounded slots, put headphones back on, now you are ready to go!
ENJOY
DETAILED INSTRUCTIONS
IN THE BOX
- X2 Bluetooth Headphones
- Jaybird Sport Carry Case
- 3 pairs Silicone Eartips (S,M,L)
- 3 pairs ComplyTM Premium Foam Eartips (S,M,L)
- 3 Pairs Ear Fins (S,M,L)
- 2 Cord Management Clips
- USB Cable
CHARGING
Charging the battery before use is recommended but not required. X2 ships pre-
charged however initial charge will vary.
Look for this Bluetooth headset battery status icon top right corner of your
iPhone screen to see status of X2 battery.
PAIRING (SETTING UP) HEADPHONES WITH YOUR PHONE / MUSIC DEVICE
- With headphones turned off, & within 1 meter (3 feet) of music device, press & hold center key for more than 4 seconds until you see alternating red/green flashing of the status indicator and a voice prompt saying “Searching for your music device”.
- On your phone/music device, turn Bluetooth on & have it search for Bluetooth devices (see instructions in the phone/music device manual for details).
- Check for “X2” and select (enter passcode 0000 if prompted).
- X2 voice prompt will say “headphones connected”.
- If the pairing is not successful, switch off headphones by pushing the center key for more 28 than 4 seconds and repeat the steps outlined above.
PAIRING WITH A BLUETOOTH ADAPTER
- Place headphones and mobile phone within 1 meter (3 feet) of each other.
- Put the headphones into pair mode as outlined on prior page.
- If using BAU Universal Bluetooth Adapter put into pair mode also (see BAU manual).
- Plug the Bluetooth adapter into the music device and play a song.
- The headphones and adapter will pair automatically (passcode of adapter must be 0000).
- After successful pairing and connecting, the headphones will say “Headphones connected”.
PAIRING WITH SEVERAL BLUETOOTH DEVICES
Paired devices will remember each other unless pairing information is deleted,
so there is no need to pair again. X2 can pair and remember 8 phone/music
devices. Repeat the steps outlined on prior pages to set-up your headphones
with another phone/music device. Note that if a 9th phone/music devices is
paired the oldest pairing information is deleted. X2 will connect with the
latest connected device. If you want to use another paired phone/music device,
switch off the Bluetooth function of the current Bluetooth device, and then
connect it with the other phone/music device by selecting “X2” in the
Bluetooth device list and press connect. Turn the originally paired device
back on to reconnect and switch between either of the devices.
CONTROLS
SPECIFICATIONS
Bluetooth Version| V2.1 + EDR (newer versions offer no benefits for
headphones)
---|---
SBC Codec| Customised SBC codec offers high fidelity without needing APT-X
Profile| Handsfree v1.6, Headset v1.1, A2DP v1.2 and AVRCP v1.4
Effective Range| 10 meters (30 feet)
Working Time| Music & calls up to 8 hours
Standby Time| Up to 250 hours
Input Voltage| DC 5V 100mA
Charging Time| Approximately 2 hours
Dimensions| 23 x 13 mm earbud size, 540 mm cord length
Weight| Approx 13 g
Operating Temp.| -10°C to 50°C
WARRANTY, CARE & MAINTANCE
Full warranty, care and maintenance details at jaybirdgear.com/warranty
+1.866.244.3399
WARNING: Due to the isolating characteristics of these headphones do not use
while driving, riding a bike or where vehicular traffic is present, or in any
other activity where failure to hear surrounding sounds could be dangerous.
Use of these headphones at excessive volumes may cause permanent hearing
damage. Always turn the volume down before use. Take caution in regards to
inserting objects into ear canal, use at own risk.
Copyright 2012 Jaybird, LLC. All rights reserved. Jaybird, and the Jaybird
logo are trademarks of Jaybird, LLC. Bluetooth is a trademark owned by
Bluetooth SIG, Inc. USA, and licensed to Jaybird, LLC. iPhone is a trademark
of Apple, Inc., registered in the U.S. and other countries.
Manufactured under European patent no EP1410607B1 & corresponding foreign
patents. Assembled in China.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications to device will void the user’s authority to operate the device.
The battery is recycled. Do not dispose of the battery in fire, as it may
cause explosion.
Administrative Regulations on Low Power Radio Waves Radiated Devices warning:
Article 12 – Without permission granted by the NCC, any company, enterprise,
or user is not allowed to change frequency, enhance transmitting power or
alter original characteristic as well as performance to a approved low power
radio-frequency devices.
Article 14 – The low power radio-frequency devices shall not influence
aircraft security and interfere legal communications; If found, the user shall
cease operating immediately until no interference is achieved. The said legal
communications means radio communications is operated in compliance with the
Telecommunications Act. The low power radio-frequency devices must be
susceptible with the interference from legal communications or ISM radio wave
radiated devices.
TAKE A MOMENT TO REGISTER YOUR LIFETIME WARRANTY AGAINST SWEAT
jaybirdgear.com/intheclubnow
LISTEN RESPONSIBLY
Avoid excessive volume levels and prolonged periods of listening. Do not use
around road traffic.
HAVE FUN
Documents / Resources
|
JAYBIRD X2 Premium Bluetooth
Earbuds
[pdf] User Guide
X2 Premium Bluetooth Earbuds, X2, Premium Bluetooth Earbuds, Bluetooth
Earbuds, Earbuds
---|---