MEYER CROSS FL0335 Brushed Brass Matte Black Floor Lamp Instructions

MEYER CROSS FL0335 Brushed Brass Matte Black Floor Lamp

Save these instructions

IMPORTANT SAFETY INSTRUCTION

• These instructions are provided for your safety.
  Please read carefully and completely before beginning the assembly and installation of this lighting fixture.

• This lighting fixture is intended for indoor use only.

• Always place lighting fixture on a solid, level surface.

• For use with E26 (medium) base light bulbs only.

• To avoid the risk of fire, do not exceed the maximum wattage of 100W incandescent bulb , or 9W LED bulb or 23W fluorescent (CFL) bulb or 9W self-ballasted LED bulb (Bulbs not included)

• This lighting fixture has a polarized plug (one prong is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted.

• Do not alter the plug. Do not attempt to bypass this safety feature.

WARNINGS

• To reduce the risk of fire, electrical shock, or personal injury: always turn off and unplug this lighting fixture and allow it to cool before attempting to replace the light bulb.
• Do not touch light bulb while fixture is turned on.
• Keep flammable materials away from this lighting fixture.
• Never look directly at a lit bulb.

CARE INSTRUCTIONS

• Unplug lamp before cleaning.
• Wipe clean with a soft, dry cloth or static duster.
• Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fixture’s finish

PRE-ASSEMBLY

• Carefully remove all parts and hardware from carton, along with any protective plastic packaging.
• Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
• Part F (Lampshade Ring) may come pre-installed to Part A (Lampshade Post).
  Unscrew Part F before installing Part E (Lampshade), then reinstall Part F to secure.

PARTS INCLUDED

• (A) Lampshade Post
• (B) Middle Post
• (C) Bottom Post
• (D) Lampshade Post
• (E) Lampshade
• (F) Lampshade Ring
• (G) On/Off Control
  For use with light bulbs with a E26 (medium) base.
  DO NOT EXCEED THE SPECIFIED WATTAGE.
  BEGIN ASSEMBLY AT THE TOP, ON A SOLID, FLAT SURFACE.
  BE CAREFUL NOT TO STRIP THREADS.
  INSTALL LAMPSHADE LAST.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>