MEYER CROSS FL1581 Integrated LED Brushed Brass Floor Lamp Instructions
- October 30, 2023
- MEYER CROSS
Table of Contents
MEYER CROSS FL1581 Integrated LED Brushed Brass Floor Lamp
Product Information
This product is a floor lamp made in China and comes in two models, FL1580 and FL1581. The lamp is designed to be used with light bulbs that have an E12 base, which is included with the product. The lamp consists of several parts, including a top post/socket, middle post, bottom post, base, large washer, locking washer, nut, lampshade, wrench, and on/off control. The lamp is designed to provide adequate lighting while complementing the decor of any room.
Product Usage Instructions
- Before assembling the lamp, carefully remove all parts and hardware from the carton along with any protective plastic packaging. Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
- Begin assembly at the top with part A and work down. Carefully pull the power cord out from the base to remove slack.
- Be careful not to strip threads during assembly.
- After assembly is completed, loosen and retighten the nut to straighten the lamp if necessary.
- The lamp is designed to be used with light bulbs that have an E12 base. Do not exceed the specified wattage.
- The on/off control is located on the lamp and can be used to turn the lamp on or off as needed.
- It is important to follow all instructions carefully to avoid causing damage to the fixture’s finish and ensure proper usage of the product.
IMPORTANT SAFETY INSTRUCTIONS
- These instructions are provided for your safety. Please read carefully and completely before beginning the assembly and installation of this lighting fixture.
- This lighting fixture is intended for indoor use only.
- Always place lighting fixture on a solid, level surface.
- This lighting fixture has a polarized plug (one prong is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not alter the plug. Do not attempt to bypass this safety feature
WARNINGS:
- To reduce the risk of fire, electrical shock, or personal injury: always turn off and unplug this lighting fixture and allow it to cool before attempting to replace the light bulb.
- Do not touch light bulb while fixture is turned on.
- Keep flammable materials away from this lighting fixture.
- Never look directly at a lit bulb.
CARE INSTRUCTIONS
- Unplug lamp before cleaning.
- Wipe clean with a soft, dry cloth or static duster.
- Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fixture’s finish
PRE-ASSEMBLY
Carefully remove all parts and hardware from carton, along with any protective plastic packaging. Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware
Carefully pull the power cord out from the Base (D) to remove slack
PARTS INCLUDED:
- (A) Top Post / Socket
- (B) Middle Post
- (C) Bottom Post
- (D) Base
- (E) Large Washer
- (F) Locking Washer
- (G) Nut
- (H) Lampshade
- (J) Wrench
- (K) On/Off Control
For use with light bulbs with a E12 base (included). DO NOT EXCEED THE SPECIFIED WATTAGE BEGIN ASSEMBLY AT THE TOP, AT PART A, AND WORK DOWN. BE CAREFUL NOT TO STRIP THREADS. After assembly is completed, loosen and retighten Nut (G) to straighten lamp if necessary.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>