MEYER CROSS TL0909 Brass Table Lamp Instructions
- October 27, 2023
- MEYER CROSS
Table of Contents
CROSS TL0909 Brass Table Lamp
Instructions
Save these instructions
IMPORTANT SAFETY INSTRUCTIONS:
- These instructions are provided for your safety. Please read carefully and completely before beginning the assembly and installation of this lighting fixture.
- This lighting fixture is intended for indoor use only.
- Always place lighting fixture on a solid, level surface.
- For use with E26 (medium) base light bulbs only.
- To avoid the risk of fire, do not exceed the maximum wattage of 60W incandescent bulb , or 9W LED bulb , or 13W fluorescent (CFL) bulb , or 9W self-ballasted LED bulb . (Bulbs not included)
- This lighting fixture has a polarized plug (one prong is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not alter the plug. Do not attempt to bypass this safety feature.
WARNINGS:
- To reduce the risk of fire, electrical shock, or personal injury: always turn off and unplug this lighting fixture and allow it to cool before attempting to replace the light bulb.
- Do not touch light bulb while fixture is turned on.
- Keep flammable materials away from this lighting fixture.
- Never look directly at a lit bulb.
CARE INSTRUCTIONS:
- Unplug lamp before cleaning.
- Wipe clean with a soft, dry cloth or static duster.
- Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fixture’s finish
PRE-ASSEMBLY:
Carefully remove all parts and hardware from carton, along with any protective
plastic packaging. The lampshade may be covered with a plastic film that
should be removed before use.
Do not discard any contents until after assembly is complete to avoid
accidentally discarding small parts or hardware.
PARTS INCLUDED:
(A) Body
(B) Shade
(C) On/Off Switch
For use with light bulbs
with a E26 (medium) base.
DO NOT EXCEED THE
SPECIFIED WATTAGE.
Hecho en China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>