Meyer Cross FL1576 Delgado 64 Inch Brushed Brass Floor Lamp Instruction Manual

: October 30, 2023
: MEYER CROSS

Table of Contents

Meyer Cross FL1576 Delgado 64 Inch Brushed Brass Floor Lamp
Product Information
Product Important Safety Instructions
**product Care Instructions
product Pre-Assembly
product Assembly Instructions
IMPORTANT SAFETY INSTRUCTIONS
CARE INSTRUCTIONS
PRE-ASSEMBLY
PARTS INCLUDED
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Meyer Cross FL1576 Delgado 64 Inch Brushed Brass Floor Lamp

Product Information

The Floor Lamp is a lighting fixture that is designed to provide ambient light in a room. It is made in China and comes with all the necessary parts and hardware for assembly. The lamp is compatible with light bulbs that have an E26 (medium) base and has a specified wattage limit that should not be exceeded.

Product Important Safety Instructions

Before replacing the light bulb, turn off the Floor Lamp and allow it to cool.

**product Care Instructions

**

Do not use abrasive cleaning agents as they may cause damage to the fixture’s finish.

product Pre-Assembly

Carefully remove all parts and hardware from the carton, including any protective plastic packaging. Before use, remove any plastic film covering the lampshade. Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.

product Assembly Instructions

Make sure the assembly is done on a level and soft surface, such as blankets to prevent damaging the parts during assembly.
Begin assembly at the top and work down.
Attach the Lampshade Post (A) to the Top Post (B).
Attach the Middle Post (C) to the Lampshade Post (A) and Top Post (B).
Attach the Bottom Post (D) to the Middle Post (C).
Attach the Base Collar (E) to the Bottom Post (D).
Attach the Base (F) to the Base Collar (E).
Place the Washer (G) onto the threaded end of the Bottom Post (D).
Screw the Nut (H) onto the threaded end of the Bottom Post (D) and tighten it with the Tool (J).
Attach the On/Off Switch (K) to the power cord.
Carefully pull the power cord out from the Base (F) to remove the slack.
Insert a light bulb with an E26 (medium) base, making sure not to exceed the specified wattage.
Turn on the Floor Lamp using the On/Off Switch (K).

Be careful not to strip threads during assembly.

IMPORTANT SAFETY INSTRUCTIONS

These instructions are provided for your safety. Please read carefully and completely before beginning the assembly and installation of this lighting fixture.
This lighting fixture is intended for indoor use only.
Always place the lighting fixture on a solid, level surface.
For use with E26 (medium) base light bulbs only.
To avoid the risk of fire, do not exceed the maximum wattage of a 100W incandescent bulb , or 9W LED bulb , or 23W fluorescent (CFL) bulb , or 9W self-ballasted LED bulb .(Bulbs not included)
This lighting fixture has a polarized plug (one prong is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use an extension cord unless the plug can be fully inserted. Do not alter the plug. Do not attempt to bypass this safety feature.

WARNINGS

To reduce the risk of fire, electrical shock, or personal injury: always turn off and unplug this lighting fixture and allow it to cool before attempting to replace the light bulb.
Do not touch light bulb while the fixture is turned on.
Keep flammable materials away from this lighting fixture.
Never look directly at a lit bulb.

CARE INSTRUCTIONS

Unplug lamp before cleaning.
Wipe clean with a soft, dry cloth or static duster.
Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fixture’s finish

PRE-ASSEMBLY

Carefully remove all parts and hardware from carton, along with any protective plastic packaging. The lampshade may be covered with a plastic film that should be removed before use.b Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.