Meyer Cross FL1592 Dexter Floor Lamp Instruction Manual

: October 30, 2023
: MEYER CROSS

Table of Contents

Meyer Cross FL1592 Dexter Floor Lamp
Product Information
Product Usage Instructions
IMPORTANT SAFETY INSTRUCTIONS
CARE INSTRUCTIONS
PRE-ASSEMBLY
PARTS INCLUDED
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Meyer Cross FL1592 Dexter Floor Lamp

Product Information

Floor Lamp

This floor lamp is made in China and comes with pre-assembly instructions. The lamp comes with all necessary parts and hardware, including a top shade post, handle, height adjustment, middle support post, bottom support post, base, and on/off switch. It is designed for use with light bulbs with a E26 (medium) base and has a specified wattage limit to ensure safe use. The lamp has a power cord that can be carefully pulled out from the base to remove slack.

Product Usage Instructions

Floor Lamp

Before attempting to replace the light bulb or perform any maintenance on the lamp, turn off and unplug the lighting fixture. Allow it to cool before proceeding.
To begin assembly, carefully remove all parts and hardware from the carton and any protective plastic packaging. Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
Start assembly at the base on a solid, flat surface. Take extra care not to strip threads.
Insert the bottom support post (E) into the base (F) and secure it in place.
Attach the middle support post (D) to the bottom support post (E) and secure it in place.
Attach the top shade post (A) to the middle support post (D) and secure it in place.
Attach the handle (B) to the top shade post (A) and secure it in place.
Insert the power cord into the base (F) and carefully pull it out to remove slack.
Screw in a light bulb with an E26 (medium) base, making sure not to exceed the specified wattage limit.
Turn on the lamp using the on/off switch (G).
To clean the lamp, use a soft, dry cloth. Do not use any abrasive cleaners or solvents as they may cause damage to the fixture’s finish

IMPORTANT SAFETY INSTRUCTIONS

These instructions are provided for your safety.
Please read carefully and completely before beginning the assembly and installation of this lighting fixture.
This lighting fixture is intended for indoor use only.
Always place lighting fixture on a solid, level surface.
For use with E26 (medium) base light bulbs only.
To avoid the risk of fire, do not exceed the maximum wattage of 100W incandescent bulb , or 9W LED bulb , or 23W fluorescent (CFL) bulb , or 9W self-ballasted LED bulb .(Bulbs not included)
This lighting fixture has a polarized plug (one prong is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted.
Do not alter the plug. Do not attempt to bypass this safety feature.

WARNINGS:

To reduce the risk of fire, electrical shock, or personal injury: always turn off and unplug this lighting fixture and allow it to cool before attempting to replace the light bulb.
Do not touch light bulb while fixture is turned on.
Keep flammable materials away from this lighting fixture.
Never look directly at a lit bulb.

CARE INSTRUCTIONS

Unplug lamp before cleaning.
Wipe clean with a soft, dry cloth or static duster.
Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fixture’s finish

PRE-ASSEMBLY

Carefully remove all parts and hardware from carton, along with any protective plastic packaging.
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.