reolink Duo Floodlight WiFi 4K 180 Degree Panoramic Camera User Guide
- June 12, 2024
- reolink
Table of Contents
reolink Duo Floodlight WiFi 4K 180 Degree Panoramic Camera User Guide
What’s in the Box
NOTE:
- The power adapter, antennas, and 4.5m power extension cable only come with the WiFi version.
Camera Introduction
Connection Diagram
Before initial setup, follow the steps below to connect your camera.
- Connect the camera to a LAN port on your router with an Ethernet cable.
- Use the power adapter to power on the camera.
Set up the Camera
Download and Launch the Reolink App or Client software, and follow the onscreen instructions to finish initial setup.
- On Smartphone
Scan to download the Reolink App.
https://reolink.com/wp-json/reo-v2/app/download
- On PC
Download path of the Reolink Client: Go to https://reolink.com > Support > App & Client.
NOTE: · When setting up the WiFi camera, you need to follow the onscreen instructions to finish the WiFi configuration first.
Mount the Camera
Installation Tips
- Do not face the camera towards any light sources.
- Do not point the camera towards a glass window. Or, it may result in poor image quality because of the window glare by infrared LEDs, ambient lights or status lights.
- Do not place the camera in a shaded area and point it towards a well-lit area. Or, it may result in poor image quality. To ensure best image quality, the lighting condition for both the camera and the capture object shall be the same.
- To ensure better image quality, it’s recommended to clean the lens with a soft cloth from time to time.
- Make sure the power ports are not directly exposed to water or moisture and not blocked by dirt or other elements.
- With IP waterproof ratings, the camera can work properly under conditions like rain and snow. However, it doesn’t mean the camera can work underwater.
- Do not install the camera at places where rain and snow can hit the lens directly.
- Try to keep the left lens level with the right lens.
Fix the Floodlight to the Camera
Fix the floodlight to the camera before mounting the camera.
- Screw the floodlight to the camera.
- Connect the wire from the floodlight to the wire from the camera. Make sure the side of the wire from the floodlight with an arrow mark on it faces the LAN port, as shown in the picture.
- Tuck the wires into the mounting bracket.
Mount the Camera to the Wall
- Drill holes in accordance with the mounting template.
- Secure the mounting plate to the wall with two screws.
- Connect the steel wire rope in the mounting bracket to the mounting plate, and hang the camera on the mounting plate.
- Drill into the wall in accordance with the hole on the mounting bracket. Lock the camera in position with a screw.
NOTE: Use the drywall anchors include in the package if needed.
Adjust the Floodlights
You can adjust the floodlights manually before or after mounting the camera. 11 English
Specification
Hardware Features
Infrared Night Vision: Up to 30 meters Floodlight: 40pcs/15W/4200K/2000 lumens
Day/Night Mode: Auto switchover Angle of View: Horizontal: 180°, vertical: 60°
General
Dimension: 195x 103x 56 mm Weight: 700g Operating Temperature: -10°C~+55°C
(14°F~131°F) Operating Humidity: 10% ~ 90%
For more specifications, visit https://reolink.com/.
Notification of Compliance
FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF Exposure Warning Statements
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator & body.
Simplified EU Declaration of Conformity
Reolink declares that the WiFi floodlight is in compliance with the essential
requirements and other relevant provisions of Directive
2014/53/EU, the PoE floodlight is in compliance with Directive 2014/30/EU.
Correct Disposal of This Product
This marking indicates that this product should not be disposed with other
household wastes. throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmentally safe recycling.
Limited Warranty
This product comes with a 2-year limited warranty that is valid only if
purchased from Reolink Official Store or a Reolink authorized reseller. Learn
more: https://reolink.com/warranty-and-return/.
NOTE: We hope that you enjoy the new purchase. But if you are not satisfied with the product and plan to return, we strongly suggest that you reset the floodlight to factory default settings before returning.
Terms and Privacy
Use of the product is subject to your agreement to the Terms of Service and
Privacy Policy at reolink.com. Keep out of reach of children.
End User License Agreement
By using the Product Software that is embedded on the Reolink product, you
agree to the terms of this End User License Agreement (“EULA”) between you and
Reolink. Learn more: https://reolink.com/eula/.
ISED Statements
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic
English 14
Development Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference. (2) This device must accept any
interference, including interference that may cause undesired operation of the
device.
Radio Frequency Exposure Statement for IC
The device has been evaluated to meet general RF exposure requirements. The
device can be used in mobile exposure conditions. The min separation distance
is 20cm.
References
- Reolink Official: Security Cameras and Systems for Home & Business
- Reolink Official: Security Cameras and Systems for Home & Business
- Warranty & Return – Reolink