MOSSLED TD005 Touch Sensitive Low Voltage Dimmer User Guide

June 6, 2024
MOSSLED

MOSSLED TD005 Touch Sensitive Low Voltage Dimmer

WARNING FOR INDOOR USE ONLY.

Regularly check the cord, the power supply and all other parts for damage.
If any part is damaged the product should not be used. Important information!

Keep these instructions for future use

CAUTION To reduce the risk of fire, electric shock, or injury to persons: Use only insulated staples or plastic ties to secure cords. Route and secure cords so that they will not be pinched or damaged
DO NOT TOUCH THE DIMMER IN TWO PLACES AT THE SAME TIME
DO NOT INSTALL THE DIMMER ON CONDUCTIVE MATERIALS

Quick-Start Guide

Thank you for purchasing this touch sensitive dimmer. Before you start please note that the entire housing of the dimmer is touch-sensitive. This means that you can only touch it in one location at a time. Do not try and hold the housing in one hand and tap it with your other hand. It will not work. We recommend that you remove the double-sided adhesive on the back of the dimmer and agree the dimmer to a fixed surface. Please ensure that the surface you adhere the dimmer to is stable and will not move when the touch dimmer is pressed. Thank you and enjoy your dimmer!

Quick-Start Guide

Detailed Instructions

  1. Remove the double sided adhesive on the back of the dimmer and apply to a fixed surface.
  2. Plug the female end of the DC power connector tail into the male end of the DC power connector tail on the LED sign
  3. Plug the male end of the DC power connector dimmer into the female DC power connector tail on the power supply.
  4. Plug in the power supply into an available wall outlet.
  5. Tap the housing of the dimmer with one finger to “tap on”. The LED should illuminate.
  6. Press your finger to the housing of the dimmer and hold. The LED will dim. Remove your finger from the housing of the dimmer once desired brightness level has been achieved. You can press your finger and hold again to increase or decrease the brightness level.
  7. Tap again to “top off”. The LED will turn off.
  8. The touch dimmer has a built-in memory which will recall the last saved brightness level.

Specifications

  • Input Voltage : 12 – 24VDC
  • Output Voltage : 12 – 24VDC
  • Max Input Current : 4A
  • Max Power : 48W for 12VDC and 96W for 24VDC

Wiring Diagram

Wiring Diagram

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals