LEDVANCE Smart Plus Zigbee Outdoor Plug Installation Guide
- June 3, 2024
- LEDVANCE
Table of Contents
Smart Plus Zigbee Outdoor Plug
Installation Guide
PAIRING WITH PARTNER APP
https://www.ledvance.com/consumer/smart/faq/
FAQ
https://smartplus.ledvance.com/faq
CUSTOMER SUPPORT
https://smartplus.ledvance.com/support
smarthome-support@ledvance.com
Hereby, LEDVANCE GmbH declares that the radio equipment type LEDVANCE SMART+
Device is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
smartplus.ledvance.com/declaration-of-
conformity.
The SMART+ Plug/Plug Outdoor switches connected appliances without separating
them from the mains. Under adverse conditions, very high capacitive and
inductive loads may lead to destruction of the device or may reduce the number
of switching cycles. Wireless radio used in Zigbee lamps/ luminaires
/components 2400–2483.5 MHz, max. RF output power 9.5dBm. Devices building up
heat must be separated from the mains, i. e. from SMART+ Plug/Plug Outdoor to
avoid accidental activation. Please make sure to disconnect SMART+ Plug/Plug
Outdoor from the mains voltage before undertaking any maintenance works. In
case of disconnection of the mains (i. e. power outage) the SMART+ Plug/Plug
Outdoor will remain in stand-by mode. Please do not use the SMART+ Plug/Plug
Outdoor together with medical devices. The plug is to be installed near the
device and must be readibly accessible. De-energised only with plug
disconnected. Do not operate when covered.
Warning: Do not insert in a row
C10449057
G11136795
03.05.2022
LEDVANCE GmbH
Steinerne Furt 62
86167 Augsburg, Germany
www.ledvance.com
References
- ce.com
- Declaration-of-conformity | LEDVANCE
- SMART+ | LEDVANCE
- Declaration of Conformity | LEDVANCE
- Corporate website | LEDVANCE
- Support | LEDVANCE
- SMART+ FAQ | LEDVANCE