KARCHER SC 2 Deluxe EasyFix Premium Instruction Manual

: October 27, 2023
: Karcher

SC 2 Deluxe EasyFix Premium
Instruction Manual KARCHER SC 2 Deluxe EasyFix
Premium

Register your product
www.kaercher.com/welcome

SC 2 Deluxe EasyFix Premium

KARCHER SC 2 Deluxe EasyFix Premium fig KARCHER
SC 2 Deluxe EasyFix Premium fig 1

General notes

Read these original operating instructions and the enclosed safety instructions before using the device for the first time. Act in accordance with them. Keep both books for future reference or for future owners.

Intended use

Only use the appliance in private households. The appliance is intended for cleaning with steam and can be used with appropriate accessories as described in these operating instructions. Detergents are not required. Observe the safety instructions.

Environmental protection

** The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations.
Electrical and electronic appliances contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which – if handled or disposed of incorrectly – can pose a potential threat to human health and the environment. However, these components are required for the correct operation of the appliance. Appliances marked by this symbol are not allowed to be disposed of together with the household rubbish.
Notes on the content materials (REACH)**
Current information on content materials can be found at: www.kaercher.com/REACH

Accessories and spare parts

Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely. Information on accessories and spare parts can be found at www.kaercher.com.

Scope of delivery

The scope of delivery for the appliance is shown on the packaging. Check the contents for completeness when unpacking. If any accessories are missing or in the event of any shipping damage, please notify your dealer.

Warranty

The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possible malfunctions on your appliance within the warranty period free of cost, provided that a material or manufacturing defect is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site. (See overleaf for the address)

Safety devices

CAUTION Missing or modified safety devices Safety devices are provided for your own protection. Never modify or bypass safety devices.
Symbols on the appliance
(according to type of appliance)

| Risk of burns, surface of appliance becomes hot during operation
---|---
| Risk of scalding from steam
| Read operating instructions

Pressure controller
The pressure controller keeps the pressure in the steam boiler as constant as possible during operation. The heating is switched off when the maximum operating pressure is reached in the steam boiler and is activated if there is a pressure drop in the steam boiler as a result of a steam removal.
Safety lock
The safety lock seals the steam boiler from the steam pressure present. If the pressure regulator is defective and overpressure occurs in the steam boiler, an pressure relief valve opens in the safety lock and steam leaks out through the lock. Prior to restarting the appliance, contact the responsible KÄRCHER Customer Service.
Safety thermostat
The safety thermostat prevents the device from overheating. If the pressure controller fails and the device overheats, then the safety thermostat switches the device off. To reset the safety thermostat, contact the responsible KÄRCHER Customer Service.

Description of the unit

The maximum amount of equipment is described in these operating instructions. Depending on the model used, there are differences in the scope of delivery (see packaging). For the figures, refer to the graphics page. Illustration A

1 Safety lock
2 LED lights Red – mains voltage present and device is heating up Green – device is ready for operation
3 Carrying handle
4 Park bracket for floor nozzle
5 Cable clips
6 Mains connection cable with mains plug
7 Holder for accessories
8 Steering rollers, rear (2x)
9 Steering rollers, front (2x)
10 Steam gun
11 Unlocking button
12 Selector switch for steam volume (with child lock)
13 Steam lever
14 Steam hose| 15 Spotlight nozzle
16 Round brush (small)
17 Power nozzle
18 Round brush (large)
19 Manual nozzle
20 Manual nozzle microfibre cover
21 Extension tubes (2 x)
22 Unlocking button
23 Floor nozzle
24 Hook and loop fastener
25 Microfibre floor cloth (1 x)
26 Microfibre floor cloth (2 x)
27 Accessory bag
optional
---|---

Installation

Installing accessories

Push the open end of the accessory onto the steam gun so that the unlocking button on the steam gun engages. Illustration G
Push the open end of the accessory onto the spotlight nozzle. Illustration H
Connect the extension tubes with the steam gun. a Push the first extension tube onto the steam gun so that the unlocking button on the steam gun engages. The connection pipe is connected. b Push the second extension tube onto the first extension tube. The connection pipes are connected. Illustration I
Push the accessory and / or the floor nozzle onto the free end of the extension tube. Illustration J The accessory is connected.

Disconnecting accessories

Set the selector switch for the steam volume to the rear. The steam lever is locked.
Push the unlocking button and pull the parts apart.

Operation

Filling water
Note Warm water reduces the heating-up time. Note Descaling the steam boiler is not required if commercially available distilled water is used.

Unscrew the safety lock.
Illustration B
Drain the water completely out of the steam boiler.
Illustration P
Fill a maximum of 1 l distilled water or tap water into the steam boiler.
Illustration B
. Insert the safety lock. Illustration C

Switching on the device

Place the device on a firm surface.
Insert the mains plug into a socket.
Illustration D
The LED light is lit in red.
When the LED light lights up green, the device is ready for operation.
Illustration E
Press the steam lever. Illustration F Steam leaks out.

Regulating the steam volume
The expelled steam volume is regulated using the selector switch for steam volume. The selector switch has 3 positions:

| Maximum steam volume
---|---
| Reduced steam volume
| No steam – child lock Note In this position, the steam lever cannot be operated.

Set the selector switch for the steam volume to required steam volume.
Press the steam lever.
Before starting cleaning, point the steam gun at a cloth until steam is expelled evenly.

Refilling water
If the steam volume is reduced during work or if no more steam volume comes out, the water will have to be refilled.

Switch the device off; see Chapter Switch off the appliance.
Unscrew the safety lock.
Fill a maximum of 1 litre distilled water or tap water into the steam boiler.
Insert the safety lock.
Insert the mains plug into a socket.
Wait until the LED light has changed from red to green. The device is ready for use.

Switch off the appliance

Pull the mains plug out of the socket.
Press the steam lever until no more steam flows out. Illustration M
The steam boiler is depressurised.
Set the child lock (selector switch for steam volume) to the rear. The steam lever is locked.

Rinsing out the steam boiler
Rinse the appliance’s steam boiler after max. every tenth boiler fill.

Switch the appliance off, see Chapter Switch off the appliance.
Allow the appliance to cool down.
Disconnect the accessory.
Fill the steam boiler with water and swing it around vigorously. Lime residue which has been deposited on the bottom of the steam boiler will be released as a result.
Drain the water completely out of the steam boiler.
Illustration P

Storing the device

Hang the floor nozzle in the park bracket.
Illustration N
Wind the steam hose and mains connection around the carrying handle or device and/or insert the steam gun in the ground floor nozzle.
Illustration O
Insert the extension tube in the large accessory holder or allow to dry and put in the accessory bag.
Illustration O
Allow the rest of the accessories to dry and then store in the accessory bag.
Illustration O
Store the device in a dry location that is protected from frost.

Important application instructions

Cleaning the floor areas
We recommend sweeping the floor or vacuum cleaning it before using the appliance. In this way the floor will be cleared of dirt and loose particles before the wet cleaning.
Freshening up textiles
Prior to using the appliance, always check the compatibility of the textiles at a concealed point: Steam down the textile, allow it to dry and then check it for any change in colour or shape.
Cleaning coated or painted surfaces
ATTENTION
Damaged surfaces
Steam can loosen wax, furniture polish, plastic coatings or paint and edge band from edges.
Do not direct the steam at glued laminated edges as the edge band may loosen.
Do not use the appliance for cleaning unsealed wood or parquet floors.
Do not use the appliance for cleaning painted or plastic coated surfaces such as kitchen or living room furniture, doors or parquet.
1. To clean these surfaces, steam a cloth briefly and use it to wipe over the surfaces.
Glass cleaner
ATTENTION
Glass breakages and damaged surfaces
Steam can damage sealed points of the window frame and, at low outside temperatures, lead to tension on the surface of window panes and hence to glass breakages. Do not direct the steam at sealed points on the window frame. At low outside temperatures, heat up the window panes by gently steaming the full surface of the glass.

Clean the window area with a manual nozzle and cover. To remove the water, use a squeegee or wipe the surfaces dry.

How to use the Accessories

Steam gun
The steam gun can be used for the following applications without accessories:

For removing slight creases from the hanging clothing items: Steam the clothing item from a distance of 10-20 cm.
For wiping damp dust: Steam a cloth briefly and use it to wipe over the furniture.

Spotlight nozzle
The spotlight nozzle is suitable for cleaning areas, joins, fittings, drains, sinks, WCs, blinds or radiators that are difficult to access. The closer the spotlight nozzle is to the soiled area, the greater the cleaning efficiency will be as the temperature and steam volume are at their highest at the nozzle opening. Larger lime deposits can be treated before steam cleaning with a suitable detergent. Allow the detergent to soak in for approx. 5 minutes and then steam it off.
1. Slide the spotlight nozzle onto the steam gun.
Illustration G
Round brush (small)
The small round brush is used for cleaning stubborn dirt. Stubborn dirt can be removed more easily by brushing. ATTENTION Damaged surfaces The brush may scratch sensitive surfaces. It is not suitable for cleaning sensitive surfaces. 1. Fit the round brush to the spotlight nozzle.
Illustration H
Round brush (large)
The large round brush is suitable for cleaning large rounded surfaces, e.g. wash basin, shower tray, bath tub, kitchen sink.
ATTENTION
Damaged surfaces
The brush may scratch sensitive surfaces. It is not suitable for cleaning sensitive surfaces.

Fit the large round brush to the spotlight nozzle.
Illustration H

Power nozzle
The power nozzle is used for cleaning stubborn dirt, blowing down corners, joins etc.

Install the power nozzle onto the spotlight nozzle according to the round brush.
Illustration H

Manual nozzle
The manual nozzle is used for cleaning small areas that can be washed down, shower cubicles and mirrors.

Push the manual nozzle onto the steam gun accord-
ing to the spotlight nozzle.
Illustration G
Pull the cover over the manual nozzle.

Floor nozzle
The floor nozzle is used for cleaning washable wall and floor coverings e.g. stone floors, tiles and PVC floors. ATTENTION Damage due to build-up of steam Heat and moisture can lead to damage. Check the heat resistance and steam effect on an inconspicuous area using a minimal volume of steam prior to use.
Note Detergent residue or care emulsions on the surface to be cleaned can lead to streaks, which will disappear however once these have been used several times. We recommend sweeping the floor or vacuum cleaning it before using the appliance. In this way the floor will be cleared of dirt and loose particles before the wet cleaning commences. Work slowly on surfaces that are heavily soiled so that the steam can impact longer.

Connect the extension tubes with the steam gun.
Illustration I
Push the floor nozzle onto the extension tube.
Illustration J
Fasten the floor cleaning cloth to the floor nozzle.
a Place the floor cleaning cloth with the hook and loop fastener strips pointing upwards on the floor.
b Place the floor nozzle onto the floor cleaning cloth, applying slight pressure.
Illustration K

The floor cleaning cloth will stick to the floor nozzle of its own accord due to the hook and loop fastener.
Removing the floor cleaning cloth

Place one foot on the bottom corner of the floor cleaning cloth and lift the floor nozzle up.
Illustration K

Note Initially, the floor cleaning cloth’s hook and loop fastener strip is very strong and cannot be removed from the floor nozzle easily. After the floor cleaning cloth has been used several times and washed, it is easier to remove from the floor nozzle and it has reached the optimum adhesion.
Parking the floor nozzle

Hang the floor nozzle in the park bracket during breaks in work.
Illustration N

Care and service

Descaling the steam boiler
Note Descaling the steam boiler is not required if commercially available distilled water is used.
Note Since the lime becomes caked on the appliance, we recommend descaling the appliance as specified in the table (KF=boiler fillings) based on the number of times the steam boiler is filled.

Hardness range	°dH	mmol/I	KF
I	soft	0-7	0-1.3
II	Medium	7-14	1.3-2.5
III	Hard	14-21	2.5-3.8
IV	Very hard	>21	>3.8

Note Your water board or municipal utilities authority can provide information on hardness of tap water.
ATTENTION
Damaged surfaces
The descaler may corrode sensitive surfaces. Fill and empty the appliance carefully.

Switch off the appliance, see Chapter .
Allow the appliance to cool down.
Unscrew the safety lock.
Drain the water completely out of the steam boiler.
Illustration P
ATTENTION Appliance damage due to descaler An unsuitable descaler and incorrect dosing of the descaler may damage the appliance. Only use KÄRCHER descaler. Use 2 dosing units of the descaler for 1.0 l of water.
Apply descaler solution to the descaler according to the details.
Fill the descaler solution into the steam boiler. Do not seal the steam boiler.
Allow the descaler solution to take effect for approx. 8 hours.
Drain descaler solution completely out of the steam boiler
Repeat the descaling process if necessary.
Rinse the steam boiler 2-3 times with cold water in order to drain all the descaler solution residue.
Drain the water completely out of the steam boiler.
Illustration P

Care of accessories

(Accessories – depending on scope of delivery)
Note The floor cleaning cloth and the cover for the manual nozzle have been washed beforehand and can be used immediately for working with the appliance. The micro fibre cloths are not suitable for dryer. Note When washing the cloths, observe the instructions on the washing tag. Do not use any liquid softeners as this will affect the ability of the cloths to pick up dirt.

Wash the floor cleaning cloths and covers at a max. temperature of 60 °C in the washing machine.

Troubleshooting guide

Malfunctions often have simple causes that you can remedy yourself using the following overview. When in doubt, or in the case of malfunctions not mentioned here, please contact your authorised Customer Service.
WARNING
Risk of electric shock and burns
Trying to eliminate faults while the appliance is connected to the mains or has not yet cooled down is always dangerous. Remove the mains plug. Allow the appliance to cool down.
The steam boiler is scaled.
Descale the steam boiler
No steam
No water in the steam boiler Refill water, see Chapter Refilling water.
The steam lever cannot be pressed
The steam lever is locked with the child lock. Set the child lock (selector switch for steam volume) to the front.
The steam lever is released.
High water egress
The steam boiler is too full.
Press the steam gun until a little water comes out.

Technical data

Electrical connection| |
---|---|---
Voltage| V| 220-240
Phase| —| 1
Frequency| Hz| 50-60
Protection class| | IPX4
Protection class| | I
Performance data| |
Heating capacity| W| 1500
Maximum operating pressure| MPa| 0.32
Heating-up time| Minutes| 7.
Continuous steaming| g/min| 40
Maximum steam blast| g/min| 100
Filling quantity| |
Steam boiler| I| 1.0
Dimensions and weights| |
Weight (without accessories)| kg| 3.
Length| mm| 304
Width| mm| 231
Height| mm| 287

THANK YOU!
MERCI! DANKE! GRACIAS!
**** Register your product and benefit from many advantages.

www.kaercher.com/welcome
**** Rate your product and tell us your opinion.

www.kaercher.com/dealersearch
Alfred Kärcher GmbH & Co. KGAlfred-Kärcher-Str. 28-40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212