LEDVANCE 78137 Side By Side Mounting Plate User Guide
- June 1, 2024
- LEDVANCE
Table of Contents
LEDVANCE 78137 Side By Side Mounting Plate
Product Specifications
- Item No: 78137
- Model: EVCSBSMTGPLATE
- Compatibility: Designed for use with EVC48ALVL2C1XX (Level 2 Commercial EVSE) and EVCPED (pedestal)
- Includes: Side-by-side mounting plate, panel cover, 14 M5*12mm screws
Product Usage Instructions
Safety Precautions
Before starting the installation, it is crucial to read and understand the safety precautions mentioned in the manual. Make sure to follow all safety guidelines to prevent personal injury or product damage.
What’s Included
The package includes the side-by-side mounting plate, panel cover, and 14 M5*12mm screws. Ensure all items are present before beginning the installation process.
Tools You Will Need
- Phillips screwdriver
- Wire cutter & stripper
- Crimping pliers
Side-by-side (SBS) Mounting Plate Installation
- Remove the back cover panels by unscrewing the 12 screws.
- Attach the SBS mounting plate to the pedestal using the provided M5 screws.
- Install holsters, cable hangers, and front panel cover.
- Mount the charger and charger mounting plate as shown in the provided pictures.
- Feed the wirings through the holes on each side and make the necessary connections.
- Install the back plates and back panel cover to complete the installation.
FAQ
-
Q: Can I install the side-by-side mounting plate without professional help?
A: To prevent personal injury or product damage, only licensed electricians should provide all installation services as per the warning in the manual. -
Q: What should I do if I notice freight damage upon receiving the product?
A: Any freight damage should be brought to the attention of the delivery carrier immediately upon receipt of the product.
Side-by-side Mounting Plate
Item No : 78137
Model: EVCSBSMTGPLATE
Side-by-side mounting plate for use with EVC48ALVL2C1XX (Level 2 Commercial
EVSE) and EVCPED (pedestal).
WARNING
Please Read All Instructions Before Attempting Installation
- TO PREVENT PERSONAL INJURY OR PRODUCT DAMAGE ONLY LICENSED ELECTRICIANS SHOULD PROVIDE ALL INSTALLATION SERVICES.
- TO AVOID ELECTRIC SHOCK OR COMPONENT DAMAGE DISCONNECT THE POWER BEFORE ATTEMPTING INSTALLATION OR SERVICING.
- THIS PRODUCT MUST BE INSTALLED BY THE NATIONAL ELECTRIC CODE (NEC) AND ALL APPLICABLE FEDERAL, STATE AND LOCAL ELECTRICAL CODES AND SAFETY STANDARDS.
- ANY ALTERATION OR MODIFICATION OF THIS PRODUCT IS EXPRESSLY FORBIDDEN AS IT MAY CAUSE SERIOUS PERSONAL INJURY, DEATH, PROPERTY DAMAGE AND/OR PRODUCT MALFUNCTION.
- TO PREVENT PRODUCT MALFUNCTION AND / OR ELECTRICAL SHOCK THIS PRODUCT MUST BE PROPERLY GROUNDED.
Safety Precautions
IMPORTANT:
READ CAREFULLY BEFORE INSTALLING THE SIDE-BY-SIDE MOUNTING PLATE. RETAIN FOR
FUTURE REFERENCE.
GENERAL:
Upon receipt of the side-by-side mounting plate, thoroughly inspect for any
freight damage which should be brought to the attention of the delivery
carrier
What’s Included
- (1) Side-by-side mounting plate
- (1) Panel cover
- (14) M5*12mm screws
Tools You Will Need
- Phillips screwdriver
- Wire cutter & stripper
- Crimping pliers
Mounting Plate Installation
- Remove the back 2 cover panels by unscrewing the 12 screws.
- Next, attach the SBS mounting plate to the pedestal with (10) M5-provided screws.
- Install the holsters, cable hangers, and front panel cover
- Install charger mounting plate and charger as shown in the pictures below. Repeat for both sides
- Feed the wirings through the holes on each side and make the connections. When finished, install the back plates and the back panel cover.
Imported by
LEDVANCE
1100 Tyrone Pike
Versailles, KY 40383
2 1-800-LIGHTBULB (1-800-544-4828)
www.ledvanceUS.com (US & Canada)
LEDVANCE is a registered trademark.
LEDVANCE est une marque déposée.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>