nezini HP02 Electric Heating Foot Massager Instruction Manual
- June 15, 2024
- NEZINI
Table of Contents
nezini HP02 Electric Heating Foot Massager
A Letter To Dear Customer
Dear customer
Hi! Thank you so much for purchasing our foot warmer massager! We are
committed to improving the quality of life for our customers and recording a
better life. Your purchase is just the beginning of our service! To ensure
your comfort during use,please be sure to read the precautions before use! If
you have any questions, please feel free to contact us for a quick solution,
we will reply and solve your problem within 24 hours at the first time:
Your satisfaction is our ultimate goal!
IMPORTANT SAFETY GUIDELINES
To avoid the risk of burns, electric shock and fire, please read the Important Safety Instructions carefully before use.
PRODUCT PARAMETER
Item
| Parameter specifications
---|---
Voltage
|
100-120V(USA) / 220-240V(UK,EUR)
Rate
|
60 Hz(USA) / 50 Hz(UK,EUR)
Power
|
150W
Current
| 0.682A（Standby current：0.1A）
Temperature settings
| Level 1-7 temperature control (Level 1 is recommended for long-term use, Level 7 is the maximum operating
temperature: 70 ℃ (158 ° F).)
Massage settings|
Level 0-6 massage function
Timing settings
|
Timing setting of 4 levels：0.5h、1h、2h、4h
Display
|
LED Display
Product size
|
27.95 inch*11.81 inch
Net weight
|
5.07 LBS (Including controller)
OPERATING INSTRUCTIONS
-
After wearing the product, you can adjust the tightness of thigh circumference and calf circumference with the attached bandage to ensure that the product is attached to the body.
-
The Control Connector must be connected to the Pad Connector before plugging the unit into an electrical outlet.
- A. Control Connector
- B. Pad Connector
NOTE: If the unit does not turn on when you press the power button, make sure the Control Connector is securely plugged into the Pad Connector.
-
Please insert the product plug into the correct 220V/120V AC power socket, and the power indicator is green.
-
Please press the Power button to turn on the product.
-
Press the Heat button to select the required heating level: 1-7.
- The higher the level, the higher the temperature.
- level1:40℃(104), level2:45℃(113), level3:50℃(122),
- level4:55℃(131), level5:60℃(140), level6:65℃(149),
- level7:70℃(158) When the product needs to be used for a long time, it is recommended to set the temperature at level 1. When rapid heating is required for a short time,it is recommended to set the temperature at level 7.
-
Press the Massage button to select the desired massage level: 0-6.
Level| Massage Function
---|---
0| Close mode: No message
1| Leg gentle mode: gently massage the legs
2| Foot gentle mode: gently massage the feet
3
| Foot and leg gentle mode: gently massage the legs and feet at the same time
4
| Alternate comfort mode: cycle between legs and feet for a quick massage
5
| Alternate strong mode: cycle between legs and feet for strong massage
6
| Foot and leg strong mode: strong massage of the legs and feet at the same
time
7. Press the Timer button to select the heating time: 0.5 hours, 1 hour, 2 hours, or 4 hours. When the usage time of the product reaches the preset time, it will stop working. And if you still need to use it, please reset the time.
8. Press the Power button to turn off the product.
CARE AND MAINTENANCE
When the product is not used, store it as follows:
- Disconnect the power cord from the electrical outlet. Do not pull by the cord.
- Make sure the Pad Connector is disconnected from the Control Connector by pressing the tabs on the sides of the Control Connector while pulling the connectors apart.
- Let the product cool down first. During storage, do not place objects on the product.
- Make sure the product is completely dry before the next use.
- To store the product, loosely roll the Heating Pad and then store it in a cool, dry, dark place after each use.
CAUTION:
DO NOT DRY CLEAN! DO NOT BLEACH! DO NOT USE WRINGER! DO NOT IRON!
FREQUENTLY ASKED QUESTIONS
What is the function of an electric heating foot massager?
- Relieve foot fatigue and pain, and improve personal comfort.
- Improve the blood circulation of the feet, and promote smooth blood circulation for people who feel cold feet in winter or summer.
- For leg swelling massage, it is recommended that the number of massage levels is gradually raised from low to high!
What temperature range does this product reach?
The temperature range of this product is 40°C (104)-70°C (158°F). There are 7
temperature adjustments in total, and the interval between each level is 5°C
(9°F). You can use the heat according to the adaptability of the human body
and your personal preference to set it up.
How long does it take to warm up to each temperature selection?
It takes about a minute to warm up, and the highest “heat level 7” takes about
two minutes to warm up.
NOTE: If you have other questions, please feel free to contact us, and we will answer you as soon as possible.
IMPORTANT TIPS
To avoid property damage or personal injury, observe the following important notices (electric shock, skin burns, fire).
- Don’t use it while sleeping.
- This product is not suitable for use by children
- Don’t use this product on animals.
- Don’t use it in an oxygen-enriched environment.
- Check the skin under the pad frequently to prevent burns.
- Use situations that require careful supervision: 6. Use this product on disabled, sleeping, unconscious people, or people with poor blood circulation.
- Don’t use product aids that contain heat-generating ingredients that may cause skin burns: such as liniments, ointments or salves, etc.
- Don’t use on insensitive skin areas: People who are not sensitive to heat, or vulnerable people who do not respond to excessive heat (such as diabetics, people with skin changes due to disease, and people with scars on heated areas, before taking any Do not use the product after taking pain relievers or alcohol).
- Never pull the power cord of the product.
- When storing the product, let the product cool down first.
- Don’t sit on this product.
- Don’t disassemble or modify this product.
- Don’t use it when wet.
- Don’t use pins or other metal means to fix this pad.
- Don’t leave this product unattended after it is plugged in, and please unplug it when not in use.
- Don’t bend or pinch the power cord, and do not use this product if it is dropped, damaged, or malfunctions, and the power cord or plug is damaged.
- Frequently check whether there is any sign of wear or damage on this product and if so, replace it with a new one before using it again.
- When using extension cords with this product, please make sure you have checked the electrical specifications section to use them correctly. (220V AC power outlet)
- This product is for non-commercial, non-industrial and personal use only, and will not be provided to hospitals for medical use. Do not use this product outdoors or for any other purpose.
- If the power cord is damaged, to avoid danger, contact the after-sales personnel for replacement.
NOTE: Once there is any problem, please feel free to contact the after- sales staff for a quick solution!
NOTICE
The manufacturer does not bear any responsibilities when personal injury or
property loss is caused due to the following reasons:
- Damage to the product due to improper use or misuse of the product.
- Alteration, change, and maintenance of the product with other equipment without following the instructions provided by the manufacturer.
- After verification, if the defects are due to improper operation during the transportation of the product.
- After verification, if the problem or dispute is caused by the quality specification or the performance of the parts and components that were produced by another manufacturer.
- In case of operation, repair, or maintenance of the unit without following the manual instructions or related regulations.
- If the damage is caused by natural calamities, improper environmental use, or force majeure.