Micsig STO2202C STO2000C Series Smart Oscilloscope User Manual

June 4, 2024
Micsig

Micsig STO2202C STO2000C Series Smart Oscilloscope

STO2000C Series Smart Oscilloscope

The STO2000C series is a new portable smart oscilloscope released by Micsig. With 300MHz bandwidth, 2GSa/s sample rate, up to 280Mpts memory depth, it also has a newly added segmented memory function, available in 2 analog channels, making the waveform capture rate high up to 270,000 wfm/s. It adopts high- sensitivity digital trigger system, with abundant trigger and decoding types, multiple measurement and mathematical calculation options, standard digital filter module, supports 256-level intensity grading with colour temperature display; equipped with LAN, Wi-Fi, USB Host, USB Device, HDMI, Trigger out etc. 1/0 ports. The 8″ 800×600 TFT LCD capacitive touch-screen and the high- level integrated control panel, combined with Micsig’s unique patented touch algorithm technology, elevates user experience to a whole new level.

  •  Abundant trigger types to meet different demands
  •  8″ large touch screen, combined with solid buttons, makes easier operation
  •  7500mAh Li-ion battery, support 3.5-hour offline work
  •  Support video recording and built-in 8G storage capacity
  •  Standard High/Low pass hardware digital filtering and segmented storage
  •  Powerful Android system, faster response & more user-friendly interfaces
  •  Support Mobile APP (iOS & Android) , Windows PC and mouse remote control
  •  Wi-Fi transmission and HDMI option, perfect for education & training
  •  256-level intensity grading with colour temperature display
  •  Unique soft keyboard, Chinese/English input, no more knob scrolling
  •  One-click quick save, simultaneous data and screenshot saving on dual channel

Specifications

  • Bandwidth 200MHz
  • Analog Channels 2
  • Rise Time (single channel) 1.75ns
  • Max. Waveform Capture Rate 130,000wfm/s (Regular mode),
  • Memory Depth 280Mpts (single channel)
  • Real-time Sample Rate 2G Sa/S (single channel)
  • Filter 20MHz, High pass, Low pass
  • 1/0 Ports Wi-Fi, LAN, HDMI, USB Host, USB Device, DC Power, Trigger out 8-inch TFT LCD
  • Display  28018050mm
  • Dimension 800600, 1410 grids
  • Weight 1340g (bare mainframe), 312g (battery)

Control Panel

Independent of Touch Screen
Various shortcut buttons respond swiftly to various operations. Less than 20% of the entire front area, this physical panel area guarantees the control capability and reserves the largest display area as much as possible for oscilloscope.Dedicated buttons are applied for more frequently used functions, one press to open, significantly saved setting time. Making three operation modes: Full touch screen, Physical knobs and buttons, and Mixed operation of both.

Main Features

Dimensions

Ultra-high Waveform Capture Rate
Up to 270K wfm/s capture rate, able to see more abnormal waveforms that invisible to ordinary oscilloscopes

31 Types of Auto Measurements
ST02000C series can measure 31 types of waveform parameters automatically, and display them all in one screen

Powerful Trigger Functions
Support Edge, Pulse width, Short pulse (Underthrow), Logic, Video, Overtime, N_Edge, Slope and other triggers. Simple and intuitive settings, swift trigger source switching mode, make the difficult part of oscilloscope application extremely easy.

Super Memory Depth
Up to 280Mpts memory depth ,Zoom into a selected part of the captured waveforms to get more details.

Hardware High-pass /Low-pass Digital Filtering
Most engineers focus on the details of a certain frequency band of a signal. Filtering out insignificant frequency to eliminate interference, achieves a better judgement of the signal

Auto
STO2000C supports automatic measurements. The scope can adjust the amplitude and horizontal time base in real time, ensures the waveform is always displayed with a suitable size on the screen, more convenient and accurate, avoids complicated manual adjustments.

Convenient Cursor Measurement
One soft touch to initiate horizontal and vertical cursors, each cursor can be moved independently. Simple two-point touch to track down the cursors, efficiency increased by 80%! No more traditional “anti-human” cursor operations!

Bus Decoding and Analysis
Support serial triggering and decoding (12C, SPI, RS232/UART,CAN, LIN)

High-precision Frequency Meter
Supports 6-bit hardware frequency meter, the accuracy is much higher than the soft solution frequency measurement, show more accurate measurement results .

Segmented Memory
Use segmented memory can present waveform details more efficiently, capture multiple waveform events at a sufficient sampling rate for effective analysis. Waveforms can be fitting displayed on multi-screens, also can be viewed frame by frame, helping users to find occasional signals quickly, save and display required data more optimally.

Screenshot inverse and Timestamp
STO2000C supports adding time stamp and inverse color to screenshots, waveform are more concise and prominent, easy to record, meet the demands of our users to collect and organize.

Soft Keyboard Input
When entering the name, IP, and special characters, ordinary oscilloscopes can only be selected one by one through the knobs, while Micsig’s can easily Input by clicking on the soft keyboard,increasing efficiency by 90%.

Built-in various practical electronic calculation tools for instant needs Channel label function allows users to rename the channel in Chinese or English at will, convenient is all.

Unique oscilloscope mobile APP and PC software via Wi-Fi, USB, Wi-Fi LAN and LAN connection. Support transfer data from scope to PC via Wi-Fi and USB. Support Micro HDMI to connect scope and display directly.

Data Sheet

Vertical system

  • Vertical system  DC,AC,GND
  • Input coupling 1M0±1%lll 7pF,500±1%
  • Input impedances  8 bit
  • Vertical resolution 2mV/div-10V/div: S±2.0%, S2mV/div: S±3.0%
  • DC gain accuracy lmV/div~lOV/div(lMO input) ,lmV/div~lV/div (500 input) (Amplitude accuracy) 40dB(lOOMHz), >3SdB(>lOOMHz)
  • Vertical scale factor ± 2.5V (probe alt. rate x1, <500mV/div), ±120V (probe alt. rate x1, ;;;,,5oomV/div)
  • CAT I 300Vrms, 400Vpk (lMO ), SVrms(SOO
  • Time base range 1 ns/div~1 ks/div
  • Time base delay range
  • Clock drift – -14divisions to 14ks, resolution: 1 pixel
  • Time base accuracy -14divisions to 14ks, resolution: 1 pixel
  • Sample system ±20ppm
  • Sample mode Real lime  2G Sa/S
  • Real lime sample rate(single channel) Real lime sample rate (dual channel) 280M pts/28 M/2. 8M/280K/28K/ Auto
  • Memory Depth (single channel) 140Mpts/14M/1.4M/140K/14K/Auto
  • Memory Depth (dual channel) Support
  • Segmented storage 2-1 Ok
  • Segment range Average of sampling for N times N is chosen from 2, 4, 8, 16, 32, 64, 128, 256
  • Average Envelope of sampling for N times N is chosen from 2, 4, 8, 16, 32, 64, 128, 256, oo
  • Envelope  Normal, Auto, Single
  • Trigger system DC, AC, HF reject, LF reject,noise reject
  • Trigger mode 200ns~10s
  • Trigger coupling
  • Trigger hold off range

Positive, negative, or either slope on any channel input. Coupling includes DC, AC, HF reject, LF reject, and noise reject. Trigger on width of positive or negative pulses that are>,<, =, *, or inside/outside a specified period of time (8ns~10s).
Trigger when any logical pattern of channels goes false or stays true for specified period of lime (8ns-1 Os). Any input can be used as a clockto look for the pattern on a clock edge. Pattern (AND, OR, NAND,NOR) specified for all input channels defined as High, Low, or Irrelevant By setting high and low thresholds, triggering pulses that span a level that does not cross another level captures positive and negative pulses Starting from the intersection of the signal and the trigger level,Trigger when the trigger level is above (or below) the duration and reaches these! lime Trigger when the waveform’s time from one level to another matches the set time condition The triggering method for video signals is different depending on the video format. Generally, there are PAL/625, SE CAM, NTSC/525, 720P, 10801, 1080P, etc. Trigger on the Nth rising/falling edge of the waveform.

Ordering information

Step 1,Select STO2000C series basic models

  • STO2202C Plus version 200MHz, 2G Sais, 280Mpts, 2CH, 7500mAh Battery capacity, 5x Bus serial decodes
  • STO2302C Plus version 300MHz, 2G Sais, 280Mpts, 2CH, 7500mAh Battery capacity, 5x Bus serial decodes

Step 2: Configure your STO2000C by adding instrument options

  • 1553B bus decoding Suitable for all models
  • 429 bus decoding Suitable for all models

The final interpretation right of this manual belongs to Shenzhen Micsig Instrument Co., Ltd

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals