Micsig CP503B High Frequency Current Probe Instruction Manual

June 1, 2024
Micsig

Micsig CP503B High Frequency Current Probe

Micsig-CP503B-High-Frequency-Current-Probe-PRODUCT

Product Information

Specifications :

  • Model: CP1003B/CP503B
  • Bandwidth: CP1003B – 100MHz, CP503B – 50MHz
  • Rise Time: CP1003B – 3.5ns, CP503B – 7ns
  • Range: 6A (CP503B) / 30A (CP1003B)
  • Output Sensitivity: 1V/2A (6A), 1V/10A(30A)
  • DC Accuracy (typical): 1%
  • Delay: < 30ns
  • Current Range: 20mA~6Apk (6A), 50mA~30Apk (30A)
  • Input Noise: 1.4 mA RMS
  • Max. Working Voltage: CAT I 300V
  • Max. Floating Voltage: CAT I 300V
  • Max. Conductor Diameter: 5mm
  • Overload Indicator: Flashing light
  • Power Supply: DC 5V 3A

Product Usage Instructions

Dual Range Selection:
The CP1003B/CP503B current probe features a dual-range selection for easy measurement of low current values. Make sure to select the appropriate range based on the current being measured.

Degaussing and Automatic Zero Setting:
To ensure accurate measurements, perform degaussing and automatic zero settings as per the user manual instructions before taking measurements with the probe.

BNC Interface Compatibility:
The standard BNC interface of CP1003B/CP503B makes it suitable for use with all oscilloscopes. Connect the probe securely to the oscilloscope using the BNC interface for reliable measurements.

Applications:
The CP1003B/CP503B current probe is ideal for various applications including electric vehicle transportation design, switching power supply design, semiconductor devices design, avionics design, and more. Refer to the user manual for specific guidance on using the probe for different applications.

FAQ:

  • Q: What is the maximum frequency range that the CP1003B/CP503B can measure?
    A: The CP1003B has a bandwidth of 100MHz, while the CP503B has a bandwidth of 50MHz. Both probes can easily measure signals over 20MHz.

  • Q: How do I know if the input current exceeds the probe’s maximum range?
    A: The overload indicator on the probe will flash when the input current exceeds the maximum range, alerting you to adjust the range selection or reduce the input current.

High Frequency AC/DC Current Probe
CP503B/CP1003B

  • Accurate and Easy AC/DC measuring capabilities
  • 6A / 30A range selection, low current measurements
  • Wide bandwidth with superior 1% accuracy (typical)

Product ModelMicsig-CP503B-High-Frequency-Current-Probe-FIG-
\(2\)

CP1003B/CP503B

Key Features

  • Dual range selection, easy to measure low current
  • Degaussing and automatic Zero setting
  • 1% DC accuracy, meet more measuring requirements
  • Standard BNC interface, suitable for all oscilloscopes (CP1003B/CP503B)

Applications

Micsig-CP503B-High-Frequency-Current-Probe-FIG-
\(3\)

  • Electric vehicle transportation design
  • Switching power supply design
  • Experiment of electronic engineering
  • Semiconductor devices design
  • Avionics design
  • Inverter/Transformer design
  • Electronic ballast design
  • Industrial Control / Consumer Electronics design
  • Engine driven design
  • Power electronics and electric drive experimental design

Application Performance

  1. High frequency AC/DC current probe can easily measure signals over 20MHz (Yellow waveform on CH1)
    Signal is completely distorted when measured by Low frequency current probe (Blue waveform on CH2)Micsig-CP503B-High-Frequency-Current-Probe-FIG-
\(4\)

  2. Surge current waveform at power adapter startupMicsig-CP503B-High-Frequency-Current-Probe-FIG- \(5\)

Easy Measurement

Micsig-CP503B-High-Frequency-Current-Probe-FIG- \(6\) Micsig-CP503B-High-Frequency-Current-Probe-FIG-
\(7\)

Specifications

Model CP503B CP1003B
Bandwidth 50MHz 100MHz
Rise Time ≤ 7ns ≤ 3.5ns
Range 6A (2X) / 30A (10X)

Output sensitivity

| 1V/2A (6A)

1V/10A (30A)

DC accuracy (typical)

| ±1%±10mA (6A)

±1%±50mA (30A)

Delay

| < 30ns (6A)

< 30ns (30A)

Current Range

| 20mA~6Apk (6A)

50mA~30Apk (30A)

Max. Current Input| 30Apk, 60Apk-pk, 21.21Arms
Noise| ≤ 1.4 mA RMS (Bandwidth at 20 MHz, Range 30A, 10X)
Max. Working Voltage| CAT I 300V
Max. Floating Voltage| CAT I 300V
Max. Conductor Diameter| 5mm
Overload Indicator| Flashing light
Power Supply| DC 5V 3A

FLOW CHARTS

Micsig-CP503B-High-Frequency-Current-Probe-FIG-
\(8\)

Shenzhen Micsig Technology Co., Ltd.
Tel: +86 755-88600880
Email: sales@micsig.com
Web: www.micsig.com
Add: 1F, Huafeng International Robot Industrial Park, Hangcheng Rd, Baoan District, Shenzhen, Guangdong, China
Micsig reserves the right of final interpretation for the content hereinabove;
It is subject to update without prior notice.Micsig-CP503B-High-Frequency-
Current-Probe-FIG- \(1\)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals