PYLE PHSKR14 3-Piece Wireless BT Streaming Stereo System User Guide

: June 4, 2024
: Pyle

Table of Contents

PYLE PHSKR14 3-Piece Wireless BT Streaming Stereo System
Safety Instructions
Remote Control Function Keys
Front Panel
Rear Panel
CONNECTIONS
SYSTEM SETUP FOR DVD MODE
REMOTE FUNCTIONS
HOW TO SEARCH
SYSTEM SETUP
TROUBLESHOOTING
USB COPY
COMMON OPERATION
Features:
What’s in the Box:
Technical Specs:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PYLE PHSKR14 3-Piece Wireless BT Streaming Stereo System

Safety Instructions

Basic Safety Requirements

Unplug the unit during lightning storms or when you do not intend to use it for a long period of time.
To remove the plug from the electrical outlet, do not pull on the supply cable. Grasp the plug firmly and pull to remove.
If the supply cord is damaged in any way, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard.
Place the unit where there is good ventilation.
Place on a flat, hard and stable surface.
Do not place the unit of a bed, sofa, rug or similar surfaces as this may lead to the ventilation openings being blocked.
Do not expose the unit to direct sunlight or place it in any abnormally hot locations.
Do not place the unit under any heavy object or in an unventilated place.
This product has no user-serviceable parts. Do not attempt to repair this product yourself. Only qualified service personnel should perform servicing.
Take the unit to the authorised service centre for inspection and repair.
Due to the high risk of fire or electric shock, do not expose this unit to rain or moisture. Do not open the cabinet as dangerous high voltages are present inside the enclosure. Only qualified service personnel should attempt to open the cabinet.
There is a laser system inside this unit classified as CLASS 1 LASER PRODUCT. Do not stare directly into the beam as this may harm your eyes.
If it is very cold, please place the unit in a warm room and turn the power on for about an hour. After that, the unit will be ready to be used.
Always ensure that the product is unplugged from the electrical outlet before moving or cleaning. Clean it with a soft cloth slightly moistened with a mild detergent. Do not use any abrasive pads, sourcing powder or solvents such as alcohol as they may damage the surface of the unit.
Do not use discs with scratches and/or deformities.

As a disc is rotated at a high speed, it is dangerous to play a broken or deformed disc. Do not apply any tape or glue to the disc as this could lead to damage of the player. Should there be a strange noise or vibration whilst playing, if the picture or sound skips, or if the picture is distorted, stop the player immediately.

Remote Control Function Keys

Note: Use 2 x ‘AAA’ batteries (Don’t included). Keep away from children.

Standby/Power on/off switch: Press to open/close the unit power. In this mode, he unit is still consuming a small amount of power.
OPEN/CLOSE : Open/Close the disc tray.
Mute: Press to mute or unmute the sound
Zoom: Magnifies/Shrinks the screen image size
Angle: Chose the different angles in the same image (Only support have multi-angle discs) Mode/Source: Press to choose Line in (AUX)/BT/DVD/USB/FM modes
SUB/COPY: Press subtitle button to displays the subtitles in dvd mode (Only supports multi-subtitle discs) Copy music contents from loaded CD disc to inserted USB drive
Clear: When using PROGRAM feature, press CLEAR to clear the input number.
PROGRAM: First, press PROG to enter program status. Then , press to select the item. Press 0 to 9 to specify the 2-digit order (To cacle, press clear).
Press to select Start, press OK to start programed playback. Press STOP twice to clear the whole proram.

Front Panel

POWER BUTTON
STOP BUTTON
VOLUME
PREV/CH-
PEV/TU.-
TREB
EQ
SOURCE
DISC TRAY
MIC
USB PORT
REMOTE CONTROL SENSOR
OPEN/CLOSE BUTTON
PLAY/PAUSE/SCAN
NEXT/CH+
FWD/TU.-
BASS
LIGHT SWITCH
AUX INPUT

Rear Panel

Y Cb/Pb Cr/Pr OUT
R/L OUTPUT
VIDEO OUT
SPEAKERS OUTPUT
FM ANT
LED1
LED3
LED2

CONNECTIONS

Connecting to a TV Set

PYLE PHSKR14 3-Piece Wireless BT Streaming Stereo System-
fig10

SYSTEM SETUP FOR DVD MODE

Setup
Follow the steps below to check the connection:

Turn on the TV and shift to “VIDEO INPUT”.
Turn on other units such as an audio or VCR if they are connected.

Turning the Unit On:

Press the POWER button on the panel. The DVD player will automatically read a disc if it has already been inserted in the player.
Press the OPEN/CLOSE button to open the disc tray to insert or replace a disc.
Insert a disc onto the disc tray and press OPEN/CLOSE button again to close the disc tray. The screen will display what type of disc is being played.
The DVD player will select the state of play according to the disc format.
DIS C FORMAT| STATE OF PLAY
---|---
CD/ MP3| First track.
DVD/VCD/SVCD with PBC| From the menu screen, press the PBC button on the panel or on the remote control to play back from the beginning.
DVD/VCD/SVCD without PBC| Automatically plays from the beginning.

Note: PBC is the abbreviation for PLAYBACK CONTROL. If a disc has PBC, it means that it has a menu from where you are able to choose a track, chapter or other instruction at the beginning of playback.

ACTION	BUTTON ON PANEL	KEY ON REMOTE CONTROL
Play	PLAY/PAUSE	PLAY
Pause	PLAY/PAUSE	PAUSE
Next track or chapter	NEXT	NEXT
Previous track or chapter	PREV	PREV
Stop	STOP	STOP

Turning the Unit Off:
Press the STOP button, then press the OPEN/CLOSE button to open the disc tray. Remove the disc and close the disc tray by pressing the OPEN/CLOSE button again. Then press the POWER button to turn off the player. It is recommended that discs are removed before the player is turned off. Remove the plug from the outlet on the wall if the player will not be used for a long time.

REMOTE FUNCTIONS

NO.	OPERATION	DISC	INSTRUCTION

__

1

| __

__

STOP RESUME

| __

__

ALL FORMATS

| Press STOP button to enter Stop mode. The TV screen will display the starter logo. With certain disc types, such as DVD, the player can resume playback from the point where it was stopped. Press RESUME to resume playback from the location where playback was stopped or from the beginning of the disc. Please note: The player will go into SCREEN SAVE MODE if there is no activity within one minute. Press any key to return to NORMAL mode.
__

2

| __

STEP

| DVD SVCD

VCD

| Press STEP continuously to single step forward to the next frame in the video. Press PLAY to resume normal playback.
__

3

| FAST FORWARD| VCD SVCD DVD| Press FWD button to fast forward through the disc. Each time the FWD button is pressed, the fast forward motion speed changes. Press PLAY to resume normal playback.
__

4

| __

REWIND

| DVD SVCD

VCD

| Press REV button to rewind through the disc. Each time the REV button is pressed, the rewind motion speed changes. Press PLAY to resume normal playback.
__

5

| __

SLOW

| DVD SVCD VCD| By continuously pressing the “SLOW” button, the following mode and information will appear on the screen – slow forward 1/2.1/8.1/16.1/32. Press the “PLAY” button at anytime to return to normal playback mode.
__

__

6

| __

__

REPEAT

| __

__

DVD

| To repeat a chapter, DVD title or the whole DVD content, please see below:

– Press REPEAT once to repeat the contents of the chapter.

– Press it twice to repeat the contents of the title.

– Press it three times to repeat the contents of the DVD disc.

– Press it four times to cancel the repeat mode.

__

7

| __

__

A-B REPEAT

| __

__

ALL

| To repeat a speciﬁc section of the DVD content, please follow the steps below:

Press the A-B key to set Point A as the starting point. Press the key again to set Point B as the end point. The part between A and B will be played repeatedly.

Press A-B key a third time to cancel this function.

__

8

10

| PBC

(Playback Control)

| __

DVD SVCD VCD2.0

| The PBC allows the user to play Video CDs interactively.

If PBC is ON, the user can use the digit buttons to select a track but only from the menu. If PBC is OFF, the user can select the track directly.

11| TITLE| DVD| Press this key to plav the selected menu.
12| MENU| DVD| Press this key to play the selected menu.
---|---|---|---
13| DIRECTION&

ENTER

| ALL| Press this key to choose the selected column

you want, and then press “ENTER” to conﬁrm.

14| ANGLE| DVD| Press this key to watch the same scene from

diﬀerent angles. A multi angle icon will be

shown on the bottom left corner of the TV screen to prompt you to shift from this angle to another angle.

15| LANGUAGE

SUBTITLE

| DVD| Press this key to shift from one language(subtitle)

to another(need disc support).

__

16

| __

UR

| DVD SVCD

VCD

| Continuously press this key to select left channel, right channel or stereo. You should

ﬁrst choose audio output as 2 CH in the setup menu.

17| MUTE VOLUME+/-| ALL FORMATS| Press “MUTE” to turn oﬀ sound and press again to turn on. Press “VOLUME” to increase and decrease the sound.
__

18

| __

OSD

| DVD SVCD VCD| On Screen Display (OSD). Users can select the whole setup menu and on-screen display language.
19| N/P| DVD| Continuously press this button to shift between PAL and NTSC TV systems. Choose the correct system to ﬁt your TV set, otherwise you may only get a black/white or unstable image.
20| FREEZE| DVD SVCD/DVD| Press this key once to “freeze” image while sound is still on. Press the button a second time to cancel.
21| RAND| ALL FORMATS| Press this key once to get random playback. Press it a second time to cancel.
__

22

| __

REMAIN

| __

DVD

| Press the REMAIN button to check total remaining time of a title or chapter being played. Each time the REMAIN button is pressed, the information changes.
| | SVCD VCD CD| Press the REMAIN button once to check the remaining time of the track, a second time to check the remaining time of the chapter and a third time to check the remaining time of the disc.
__

__

23

| __

__

PROG

| __

__

SVCD VCD CD

| Press the PROG button to setup the playback sequence manually, i.e. if you want to playback track 2, 11 and 102, do the following:

1. Press 2,

2. Press+10,1

3. Press +10 ten times, then 2.

Finally, press “PLAY” to go to your chosen track.

__

24

| __

SETUP

| __

ALL FORMATS

| Press the “SETUP” button to select the various functions of your player, for example, audio output, parental control, etc. Refer to chapter 6 for further details.
__

25

| NUMERICS & SEARCH| ALL FORMATS| Press these buttons to go directly to where you want to watch from or listen to. Refer to the next

chapter for details.

---|---|---|---

HOW TO SEARCH

DISC	OPERATIONS	TV SCREEN
DVD	Press the TIME button once to display the Screen Search menu. Press twice

to cancel. In the Search Menu, you can use the UP/DOWN cursor buttons to select an item. Then press PLAY to conﬁrm.| __

TITLE :1/2 CHAPTER :2/18

__

DVD

| • To play Title 2, press TIME on the remote control, then press 2 and then PLAY.

• To play Title 1 chapter 5, press TIME on the remote control, RIGHT, then press 5 and PLAY.

|
• Press “TIME” again to directly input a

speciﬁc time for example:

• If you want to play the DVD at 1:23:45 point (one hour, twenty third minute and forty ﬁfth second) input 1,2,3,4,5 and press PLAY.

• If you want to play the DVD at the 00:23:45 point (twenty third minute and forty ﬁfth second) input 2,3,4,5 and press PLAY.

| __

__

TITLE: 2/2

__

SVCD/ VCD/

CD/

| Press “TIME” to directly input the time. Please note:

1. Turn oﬀ PBC for SVCD and VCD 2.0 before

using the search function.

2. CD: You may directly input the track number you want to listen to. In other words, you do not need to use the search function.

|
__

__

MP3

| The search function is not available when playing MP3 discs.

Choose your favourite song by following the instructions below:

1. Please make reference to Fig 1 on the right hand side – this is the interface when playing MP3 discs. The highlighted song is the song that is currently playing. Press NEXT/PREV to select another song. The selected song will automatically play. You

can also press UP, DOWN, LEFT or RIGHT to

select a speciﬁc song then press PLAY.

| SONGLIST 01/02 DIR: DIR NAME 01/15 TRK: 001/155 00:05

SONG1 SONG2 SONG3 SONG4 SONG5 SONG6 SONG7 SONGS

SONG9 SONG10

Fig 1
ALBUMLIST 01/02 SONG NUMBER:155 ALBUM1 ALBUM2

ALBUM3 ALBUM4

| 2. Press “RETURN” to go back to main menu, (see Figure 2 on the right hand side). Press NEXT to select an album then press NEXT again to select a song.

Or you can input the required track number

directly to play a speciﬁc song.

| ALBUM5 ALBUM6

ALBUM7 ALBUM8

ALBUM9 ALBUM10

---|---|---
__

Fig. 2

SYSTEM SETUP

MAIN MENU
- Press the “SETUP” key on the remote control to enter the Setup menu.
- Then press UP/DOWN/LEFT or RIGHT to highlight the option you want to adjust in the menu and then press “ENTER” to enter. To exit the Setup menu, press the “SETUP” key.
LANGUAGE SETUP
Some DVD players support multiple languages. Press the Language key, and the ﬁrst audio selection will appear on the screen. Select your required option.
Please see all options below:
** SUB-MENU| CHOICE| REMARK**
---|---|---
OSD| ENGLISH/ESPANISH| Select the language for the OSD Setup menu.
MENU| 1-8| Select the language for the DVD menu.
AUDIO| 1-8| Select spoken language.
SUB-TITLE| 1-8| Select subtitle language.
RETURN| | Return to the Main menu.
SCREEN SETUP
This DVD player supports a variety of Video Outputs. SUB-MENU| CHOICE| REMARK
---|---|---
TV TYPE| 16:9/4:3PS/4:3LB| Please select the mode that is the most

compatible with your TV.

SCREEN

SAVER

|

ON/OFF

| Choose whether to have a screen saver or not.
TV SYSTEM| PAL/NTSC/AUTO| Select suitable TV system.
BRIGHTNESS| NORMAL/ BRIGHT/SOFT| Adjust the brightness of the video output.
CONTRAST| -4-4| Adjust the contrast of the video output.
RETURN| | Return to the Main menu
4. PARENTAL LOCK SETUP
This DVD supports parental control password protection to prevent children from watching unsuitable movies or images. SUB-MENU| DESCRIPTION| TV SCREEN
---|---|---

PARENTAL CONTROL

| You will be asked to input a password once Parental Control is selected. The Parental Control level can only be changed once the correct password has been entered. There are a total of eight levels. The higher the level,

i.e. level 8, the less the control over what movies can be viewed.

|

PARENTAL CONTROL SETUP

LEVEL :8

PRESS “LEFT”, “RIGHT” TO CHANGE VALUE

CHANGE PASSWORD

| Only once the correct password is entered, can the Parental Control be activated. The default password is

“0000”.

|

ENTER PASSWORD THEN PRESS “ENTER”

AUDIO SETUP
The setup operations are as follows: SUB-MENU| CHOICE| REMARK
---|---|---
OUTPUT| 2CH| Left or right output.
5.1CH| Decoded AC-3 5.1 channel output.

SPDIF

| No-decoded AC-3 or DTS digital signal output. Make sure to select this output if you are using a coaxial or optical output to the audio ampliﬁer.
CENTER| ON/OFF| To turn the centre speaker output On/Oﬀ.
REAR| ON/OFF| To turn the rear surround speaker output On/Oﬀ.

SUBWOOFER

|

ON/OFF

| To turn the subwoofer speaker output On/Oﬀ.

Please note:

1. These six speaker setups are only available when output type is 5.1 CH.

2. The signal of turn -oﬀ channel will be distributed to other

channels.

LPCM| 48/96kHz|

TROUBLESHOOTING

Before repairing, please take a look at the following problems and possible solutions first.

NO.	PROBLEM	SOLUTION

| ****

“No Disc” displayed on screen.

| If you place the disc on the tray and the player displays “NO DISC” once loaded:

1. Check whether the disc is placed correctly (label side up).

2. Check the format of the disc.

3. Check whether the disc is dirty or damaged.

4. Clean the lens – this usually needs to be done after 20

hours of playback.

| ****

No sound.

| 1. Set to current connecting channel.

2. Replace audio connection or connect correctly.

3. Ensure connected unit works properly or turn volume up.

USB COPY

The USB storage capacity range must not exceed 16GB.
Only insert a USB where there is no disc in the tray.
Press “MODE” button on the unit or “SOURCE” on the remote control:
- DVD and USB will appear on the TV screen. Please use and buttons to select USB. Then press “ENTER” for the USB to be read.
- Please note: If a disc needs to be read after a USB has been read, please press “MODE” on the unit or“ SOURCE” on the control and use and buttons to select DVD.
- To Copy an MP3 File:
  When playing an MP3 disc, press “COPY” button on the remote and enter the copy selection interface; the content that can be copied are the tracks of the current disc being played.
- To Copy an MP4 File:
  When playing an MPEG4 disc, press the “STOP” key to return to the menu interface then press the “COPY” key on the remote and enter the copy selection interface; the content that can be copied are the tracks of the current disc being played.
- Create ID3 Information:
- Move the highlight bar to “CREATE ID3 TAG” option, then press “ENTER” key to select or cancel. By selecting this option during the copying process, the file will be created with ID3 information which is produced automatically by the system. When selecting, press the Direction and Confirm buttons.
- Once the selection is complete, move the cursor to the program.
- Selecting a Program to Copy:
  Move the Direction cursor over the program to be copied. If only some of the program is to be copied, move the cursor over the upper program selection, then press Confirm to cancel the selection. Press the Direction buttons on the remote control to select the program to be copied, then press the Confirm button.
- Copy:
- Move the highlight bar to “START” option; at this time, the information about this copy will be shown on the right hand side (TOTAL TRACKS, TOTAL TIME and TOTAL SIZE). Then press “ENTER” key to start copying and the system will write the CD in MP3 format onto the designated USB. When copying at normal speed, you can listen to the content to be copied at the same time; when selecting 4 times speed, it will be mute.
- Please note: When you press the “ENTER” key to switch speeds, there will be a slight sound which continues for a few seconds.
- Cancel Copy:
  During copy, you can move the highlight bar to “CANCEL” option and press “ENTER” key to confirm.
- Return from Copying Screen:
- Move the highlight bar to “RETURN” option and press “ENTER” key to confirm return.
- Please note: Before copy, ensure that the available space on the USB is enough for the size of the file(s) to be copied.

COMMON OPERATION

Wireless BT Connectivity:

Hassle-Free Pairing, Simple Music Streaming
Compatible with All of Today’s Latest Wireless BT Devices (Smartphones, Tablets, Laptops, Computers, etc.)
Wireless BT Version: 5.0V
Wireless BT Network Name: ‘PHSKR14’
Wireless BT Range: Up to 30.0’ ft.

To connect an external device to this unit via BT:

Press “SOURCE Switch” on the remote control or on the panel to select the BT function. The corresponding screen will then display “BT” indicating that the BT function is on.
Ensure the BT function is on on the external device and search for PHSKR14. Once found, click on it and pair. Some devices may need a pin code to connect; try 0000 or 1234. Once connected, you will hear a signal indicating that the connection is successful.

Aux In Function Operation
Switch on the unit. Press the MODE button to switch to AUX IN mode. Connect the external music player using the cable. The unit will start playing the selected music on the external player. Using the remote control, play, pause or stop the music being played. Please note that in Line Input mode, some functions may not be available.

FM Radio Function Operation

Switch on the unit. Press the MODE key to switch to FM mode, then press the SCAN key to automatically search and store radio channels.
When the search is complete, the unit will play the ﬁrst stored channel.
Press NEXT or PREV button to select the next or previous radio station. If the signal is not good, you can adjust the signal by pressing the REV or FWD button. For better sound quality, make sure that the antenna is fully extended.