QAZQA Jeana FL 3 Modern Floor Lamp Instruction Manual
- June 16, 2024
- QAZQA
Table of Contents
QAZQA Jeana FL 3 Modern Floor Lamp
Product Information
Specifications
- Power Supply: 220-240V~ 50Hz
- IP Rating: IP20
- Model: Jeana FL 3
- Suitable Light Source: GU10 LED, Max 7W
Overall Size
- Jeana FL 3 103901/103902: 87mm x 87mm
- Jeana FL 3 106016: 54mm x 54mm
- 103903/103904: 2000mm x 220mm
- 2500mm x 220mm
- 1500mm x 1500mm
Manufacturer Information
-
FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands
Website: www.qazqa.nl -
FittinQ LTD
55 Baker Street, London, W1U 7EU United Kingdom
Product Usage Instructions
Installation
- Ensure the power supply is switched off before installation.
- Select a suitable location for the Jeana FL 3 fixture.
- If required, use appropriate tools to mount the fixture securely on the desired surface.
- Connect the power supply to the fixture according to local electrical regulations.
- Insert the suitable light source, GU10 LED with a maximum power rating of 7W, into the fixture.
- Switch on the power supply and test the functionality of the Jeana FL 3.
Usage
To use the Jeana FL 3, follow these steps:
- Ensure the power supply is switched on.
- Use the appropriate controls (if available) to adjust the brightness or colour temperature of the GU10 LED light source.
- The Jeana FL 3 can be used in various settings such as residential homes, offices, or retail spaces.
- Ensure the fixture is regularly cleaned and maintained to optimize performance and longevity.
Maintenance
Regular maintenance is essential to keep the Jeana FL 3 in good working
condition. Follow these maintenance tips:
- Switch off the power supply before cleaning the fixture.
- Use a soft, dry cloth to remove any dust or dirt from the surface of the fixture.
- Avoid using harsh chemicals or abrasive materials that may damage the fixture.
- Inspect the GU10 LED light source periodically and replace if necessary.
Safety Precautions
It is important to observe the following safety precautions while using the
Jeana FL 3:
- Do not expose the fixture to excessive moisture or water to prevent electrical hazards.
- Avoid touching the fixture with wet hands or when it is connected to a power source.
- If any abnormalities or malfunctions are noticed, switch off the power supply and consult a qualified technician.
- Do not modify or tamper with the fixture’s electrical components.
FAQ (Frequently Asked Questions)
-
Q: What is the maximum power rating for the GU10 LED light source?
A: The maximum power rating for the GU10 LED light source is 7W. -
Q: What is the IP rating of the Jeana FL 3?
A: The Jeana FL 3 has an IP rating of IP20, indicating it is protected against solid objects larger than 12mm and not protected against water. -
Q: Where can I find more information about the manufacturer?
A: You can visit the manufacturer’s website at www.qazqa.nl for more information about FittinQ B.V.
Installation
SAFETY INSTRUCTION
Please study the instruction manual and the below information carefully before installing or using this product. Please keep this user manual for further reference.
- The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
- Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably through a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
- Exterior lighting must not be installed during rain.
- Take account of the minimal separation distance from other objects and the room required around the fitting.
- If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
- Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
- Take account of all available technical information.
- Meaning of symbols:
- This icon indicates the level of water-proof and dust-proof
- Protection Class I: the fitting must be earthed
- Protection Class II: the fitting is doubled insulated and does not require earthing
- Protection Class III: the fitting is low-voltage
- Minimum distance from lighted objects (meters)
- The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
- The armature is designed to work only with the indicated voltage. Different items require different working voltages.
- The luminaire can be used in combination with a dimmer
- The luminaire can be dimmed by a wall switch
- The reference light angle and light space of the luminaire
- This luminaire cannot be disposed of together with normal domestic waste in a standard rubbish can, but you have to bring it to a staging area for electrical waste.
- Take note of the symbols when connecting wires:
Contact Information
FittinQ B.V.
- Smaragdweg 52, 5527 LB Hapert, The Netherlands
- www.qazqa.nl.
FittinQ LTD
55 Baker Street, London, W1U 7EU United Kingdom.