Micsig Instruments ACP1000 AC Current Probe User Manual
- June 10, 2024
- Micsig Instruments
Table of Contents
ACP1000 AC Current Probe
User Manual
The ACP1000 AC current probe is clamp-on core design.
It tests the circuit current safely and directly without disconnecting the
circuit. This method permits a safe,easy and portable current measurement.
FEATURES
- Good appearance
- Clamp-on core design safer, easier installation without disconnecting the circuit to test
- Current or three specs voltage outputignal
APPLICATIONS
- Current, ower energypower factor correction device
- Industrial control device
- Oscilloscope andharmonic wavesnalyzer
SPECIFICATIONS
- Current range: 0.1A-1000A
- Maximum working current: 2000A
- Output signal: mV/A
- Operating frequency: 10Hz–100kHz
- Maximum accuracy: 1%
- Operating Temperature: -15ºC to 60ºC
- Safety class: CAT III 600V
- Maximum conductor diameter: 2.05 inches (52mm)
- Dimensions: 4.37 in. x 8.50 in. x 1.77 in. (111x216x45mm)
- Output cable: 1.5m BNC insulated coaxial output cable can connect directly to an oscilloscope, and can be used with Multimeters with optionalBNC/Banana adapter.
- Environmentl compliance: RoHS compliane
PERFORMANCES
Model| I nut current p (A)| Output signal| Frequency
(Hz)| Secondary burden
(Ohms)| Accuracy class
---|---|---|---|---|---
k CP1000| 0.1-10| 100mV/A| 10-100K| >100K| 3%±10mV
0.1-100| 10mV/A| 2%±5mV
1-1000| lmV/A| 1%±1mV
Notes:Accuracies are given for 48 Hz to 65Hz;the ambient temperature of 25º
C±3º C.
CHARACTERISTIC PERFORMANCE CURVE
Micsig warrants that this current probe will be free from defects in materials
and workmanship for a period of one(1) year. If any such product proves
defective during this warranty period, Micsig, at its option, either will
repair the defective product without charge for parts and labor, or will
provide a replacement in exchange for the defective product. Parts, modules
and replacement products used by Micsig for warranty work may be new or
reconditioned to like new performance. All replaced parts, modules and
products become the property of Micsig.
Shenzhen Micsig Instruments Co., Ltd.
Add: 1F, Bldg A, Huafeng International Robot Industrial Park, Hangcheng
Avenue, Xixiang Sub-district, Bao’an District, Shenzhen, China
TEL: +86-755-88600880
WEB: www.micsig.com E-mail:
sales@micsig.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>