IGIA SNORE-X Intelligent Anti Snoring Device Instruction Manual

IGIA SNORE-X Intelligent Anti Snoring Device

SNORE-X
Instruction Manual
Product instruction 04~21

Hereby, we
declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. This product can be used across EU member states. Adapter shall be installed near the equipment and shall be easily accessible. The operating temperature of the device between
-l0°C to 50°C.

Smart Electronic Muscle Stimulator Plus (YA4200)

This Smart Electronic Muscle Stimulator Plus is designed to detect snores and emit specific medium-frequency pulses to stimulate the laryngeal nerves and massage the laryngeal muscles, help you to sleep peacefully. We hope that this product helps you get better sleep!

Product parameters

• Product name: Smart Electronic Muscle Stimulator Plus
• Brand:
• Model:
• Dimensions: 40.825.615.0mm
• Weight: 11.Sg
• Intermediate frequency: 8KHz±l0%
• Modulation wave frequency: 15Hz±l0%
• Battery capacity: 3.8V/130mAh
• Run time: About 15 hours
• Product components: Main component xl,
• Charging Dock xl, User Manual xl, Wearing Guide xl, Charging Cable xl, Electrode Pad xlO

Unsuitable users
People with the following conditions: pacemakers, implantable defibrillators or any other implanted metal or electronic devices; acute suppurative inflammation, a tendency to bleed, or malignant tumors in the submandibu­lar region; severe cardiovascular or cerebrovascular problems; ventilatory disorders caused by nasal disease; an allergy to electrodes or currents; skin ulcers on the site of adhesion; pregnant women or those in labor;
and children under 16.

Powering On/Off

Power on
To turn the device on, simply press the power key for 3 seconds.
Once powered on, the power indicator will turn on for 10 seconds and the Bluetooth indicator will flash for 30 seconds before automatically turning off.

Power off
To turn the device off, simply press the power key for 3 seconds.
The power and Bluetooth indicators will go off once the device is successfully powered off.

1. The power indicator will be on for less than 10 seconds after slightly press power key during or after power-on. In order to save the power, it will go off automatically.
2. If you want to confirm whether the device is working, slightly press the power key to check whether the power indicator is on. It indicates that the device is in working state when it is on.

Battery and Power

1. Checking the battery level Once the device is powered on or the power key is pressed, you can determine the battery level by checking the color of the power indicator.
   A yellow light indicates the device battery is low and requires charging. A green light indicates the device has sufficient power and does not require charging. To check the specific battery level, connect the device to the Sleeplus app and view from your phone. After pairing with the Sleep I us app, a variation of the following can be viewed on the home page:

2. This device uses a rechargeable lithium polymer battery.

3. It takes two hours to fully charge the battery.

4. To charge the device, insert the USB charging cable into the charging dock and place the device onto the dock. A flashing power light indicates the device is charging, while a steady light indicates charging is complete.

Downloading Sleeplus

How to download:

1. iPhone: Search Sleeplus via the App Store to download and install the app.
2. Android: Search Sleeplus in Google Play to download and install the app.

Pairing

1. Enable the phone’s Bluetooth function and open the Sleeplus app.
2. Once the device is powered on or the power key is pressed, the Bluetooth indicator will flash for 30 seconds, indicating that the device is ready to be paired. The indicator will turn offafter30 seconds and the device’s Bluetooth will be disabled. Press the power key to turn it on again.
3. Place the device near the phone and follow the instructions on the app to perform pairing. The connection is successful when the Bluetooth indicator changes from a flashing to a steady light.
4. If the device cannot be found, please ensure Bluetooth is turned on and the device is near the phone. Search for the device again and follow the guidelines on the app to pair the device.

Please note that the device can be used normally without pairing with the app.

1. Only iPhones with iOS 8. 0 or above or phones with Android 4.3 or above are supported.
2. Some Android phones require users to enable the location permission for the app. The Bluetooth permission must be enabled on your phone to search and pair a device.
3. The device only needs to be paired once, unless it is later unpaired.
4. After the device is paired with the app, Bluetooth is only used to connect to the phone when configuring settings and syncing data, saving you both worry and power.

Data Syncing

1. Ensure your phone’s Bluetooth is turned on and the device is powered on.
2. Open the Sleeplus app and bring your phone close to the device.
3. Gently press the power key on the device to start syncing, indicated by a pop-up window in the app. After data syncing is completed, the pop-up window will disappear, the device will automatically disconnect from Bluetooth, and the Bluetooth indicator will turn off.
4. It is recommended to sync data after each use so you can better understand your quality of sleep, sleep data, and the variation trends.

Personalized App Settings
After the device is paired with the phone, you can adjust the Maximum Intervention Intensity, the Initial Intervention Intensity, the Intervention Delay, and the Sensitivity to find a mode that works best for you.

1. Ensure your phone’s Bluetooth is turned on and the device is powered on.
2. Open the Sleeplus app and bring your phone close to the device.
3. On the data page, tap” ” to enter the Settings interface.
4. Gently press the power key on the device to turn on the Bluetooth indicator.
5. When the Settings interface displays “Connected”, you can start to adjust the default settings.
6. Users who wake up after intervention during sleep can appropriately reduce the Maximum intervention intensity level, and users who feel the effect is weak can appropriately increase the Maximum intervention intensity level.
7. Users who are easily awakened when falling asleep can adjust the Intervention Delay function according to sleeping habits.
8. Users who think the intervention is too frequent can reduce the Sensitivity level.
9. The Initial intervention intensity refers to the lowest level at which the device starts intervention. Users can increase the initial intensity level as required.

Wearing Instructions

1. It is recommended to shave any beard or hair under the chin and clean the site of adhesion with soapy water before use and keep the area clean and dry to ensure maximum adhesion. Avoid overshaving as this may cause skin irritation.
   Please refer to the image below for the correct positioning:

2. Tear off the protective film on the electrode pad and ensure the groove is nearest your throat. Lift your chin slightly and use both hands to stick the electrode pad to the correct position under your chin. This helps to prevent poor adhesion of the electrode pad as a result of movement of the soft neck tissue.

3. To ensure the pad is firmly adhered to the skin, press the entire electrode pad firmly with your palm for about 30 seconds after application to ensure that it is in full contact with the skin.

4. Power on the device and attach it to the electrode pad, as shown below:
   Note : If you are prone to sweating during sleep or find the electrode pad falls off easily, you may use medical tape that meets the requirements of local policies and regulations to hold the device in place.

FAQs

1. The device wakes me up before I properly fall asleep. What should I do?
   It is recommended to pair the device with the Sleeplus app and use the Intervention Delay to solve the problem.

2. It hurts slightly when I use the device. What should I do?
   It is recommended to pair your device with the Slee plus app and reduce the Maximum intervention intensity in Settings. You can also experience the Maximum intervention intensity when pairing and adjust the Maximum intervention intensity according to the highest level you can tolerate. For detailed steps, please view Section 7 on personalized settings.

3. Does the device need to be used in conjunction with the app?
   No, the device can be used separately from the app. You can manually adjust the default settings when pairing with the app to improve user experience. After the device is paired, Bluetooth is only used to connect to the phone when configuring settings and syncing data, saving you both worry and power. By syncing data with the app, you can better understand your quality of sleep, sleep data, and any variation trends.

4. Does the app work on all phones?
   The app supports phones with iOS 8.0 or above or Android 4.3 or above. Currently, 99% of the phones on the market can be used.

5. Do I need to sync data every day?
   It is recommended to sync data after each use. The data allows you to understand your quality of sleep, sleep information, and learn about changes in your sleep quality and habits from your sleep trends.

6. Will the power indicator stay on after the device is powered on?
   No. When the device is powered on, the power indicator will turn on for about 10 seconds, after which it will automatically turn off. Gently press the power key to turn it on again for another 10 seconds.

7. How do I know if the device is working?
   Gently press the power key, the device is working if the power and Bluetooth indicators turn on. If they do not, please power on or charge the device. The operation indicator (the Bluetooth indicator) will light when the device intervenes.

8. How long does it take to charge the device and how long can it be used for when fully charged?
   The device takes about 2 hours to fully charge, after which most users can use it for 2 nights. Heavy snorers are recommended to charge it every day.

9. Can the electrode pad be reused multiple times?
   The electrode pad is a consumable product and can only be used once. It is likely to fall off with repeated use, thereby affecting its use.

10. Is it possible to turn off the flashing light when the device is in use?
    Yes, it is. When snoring is detected during use, the device will automatically intervene during the coming respiratory cycle. The light on the device will flash during intervention. After pairing your device with the Sleeplus app, you can go to Settings to disable the Operation indicator.

Precautions

1. Use and store the device in a normal temperature range (-lO’C to +SO’C).
2. Keep the device away from sources of fire or high temperatures (e.g. electric heaters, microwaves, ovens, etc.).
3. Keep the device away from high impact or strong vibration to avoid damage.
4. Do not use chemicals, detergents, etc. to clean the device. Keep the device dry; do not wash it.
5. Do not attempt to remove or replace the built-in lithium polymer battery on your own so as to avoid damage.
6. Do not throw the device into fire to prevent the possibility of an explosion.
7. This device is not a toy. Please keep it out of the reach of children to prevent accidental swallowing or other dangerous incidents.
8. The electrode pads contained in this product are disposable. Do not reuse them.
9. After use of this product, the electrode pads should be processed in accordance with the local laws and regulations, and must not be disposed of at will.
10. Discontinue use immediately if you experience any discomfort during use of this product.
11. This product must not be used in conjunction with other medical device products.
12. Please do not attach the product to the eyes, the carotid sinus, or elsewhere near the cardiac shadow area.

After-sales Service

1. This product is covered under a one-year warranty from the date of purchase.
2. Artificial damage is not covered by warranty.
3. It is recommended to maintain a two-week trial period, with the first week as the adjustment period.
4. The electrode pad is disposable, it needs to replace with a new piece per night.

Declaration of Hazardous Substances or Elements
In accordance with the relevant regulations and requirements of the Administrative Measures on the Control of Pollution Caused by Electronic Information Products of the People’s Republic of China, the following table includes the component names of the electronic product and the toxic and hazardous substances contained within.

1. “O” indicates that the concentration of the hazardous substance in all homogeneous materials in the component is below the limit requirement of the SJ/T11363-2006 standard.
2. “X” indicates that the content of the toxic and hazardous substance in at least one homogeneous material of the component exceeds the limit requirement of the SJ/T11363-2006 standard. Environmental Friendly Use Period

• The above use period is based on normal operating conditions (temperature/humidity)

Product Standard: Q/YZFD 007-2021

FCC Caution
§ 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (
2. This device must accept any interference received, including interference that may cause undesired operation.

§ 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

* RF warning for Portable device
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Email : cscare2021@gmail.com for customer service questions www.igia.com

References

• IGIA NY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>