Guangzhou Yinghua Technology WBK-5846BT-12D Vanity Mirror User Manual

Guangzhou Yinghua Technology WBK-5846BT-12D Vanity Mirror

Important Safety Instructions:

These instructions are provided for your safety. It’s very important that they are read carefully and completely before assembly and installation of this vanity mirror.

•   INDOOR USE ONLY
•  Only use with supplied transformer & hardware.
•  Unplug the transformer from the power outlet when the product is not in use.
•  If any abnormal condition occurs, unplug the lighted mirror, allow it to cool, and return it to manufacturer for examination and repair.
•   Keep these instructions for future use.
•  Handle with care! Never place upright on a hard surface when unpacked, like tile floor. Always lay it on soft surface.
•  Avoid placing it around metal objects such as keys, pocket change, paper clips, and jewelry.
• Protect the unit and accessories from impacts, moisture, dirt, large temperature fluctuations and direct sunlight.
• Do not spill liquid on the removed lamp unit or do not place it near any flammable object or where children can reach to prevent injuries or fire.
• Never operate this mirror if it has a damaged cord or plug, if it is not working properly, if it has been dropped or otherwise damaged, or submersed in water. Return unit to manufacturer for examination and repair.

PLEASE CAUTION: : IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU’RE WRONG. Electricity and water are a dangerous combination. But did you know that an electrical appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged. Keep away from water and meltable materials. ALWAYS UNPLUG SMALL APPLIANCES!

Hollywood Mirror Constructions & Operations

How to operate the Touch Switch?

• Last/Down
• Next/UP
• Bluetooth
• Light Switch

LIGHTING CONTROL once to turn on the light, tap again to  change lighting color (cool white, day light and warm yellow), then tap to turn off the light, long press to adjust brightness,

BLUETOOTH SPEAKER:

1.  Turn on: Press button to turn on Bluetooth Speaker, with a beep voice and the indicator light starts to flash quickly, the Bluetooth can be searched.
2.  Bluetooth Connection: Turn on the Bluetooth of your phone and search for the device name of “K3030” to connect. Heard a beep voice and the light flash slowly, then the phone can sync to the Bluetooth Speaker to play music.
3.  Bluetooth Adjustment: Tap or to play LAST or NEXT music. Long Press or to turn VOLUME DOWN or UP
4.  Turn Off: Press turn off the Bluetooth Speaker function.

How to hang the Mirror on the wall?

1.  Prepare the installation tools: tape measure, impact drill, screwdriver, hammer, vise.
2.  Please make sure that the wall is a load-bearing wall that can withstand the weight of the mirror.
3. Installation steps:
4.  Screw those screws out of the base and separate the base from the mirror.
5.  Measure the distance between the two hanging holes behind the mirror.
6.  According to the measured distance, punch the hole with a percussion drill, the drilling depth is 5cm.
7.  Make sure the screws on the wall are strong enough to support the mirror, then carefully hang the Mirror against the screws on the wall.

NOTE : INSTALLATION TOOLS & HANGING SCREWS ARE NOT INCLUED IN PACKAGE.

How to replace the bulbs of the mirror?

Scan the QR code on the left to view the instruction video on YouTube; Or open the YouTube link below in your browser to view the video.

TOOLS REQUIRED

1.  Power off the mirror and unplug it, unscrew the back board of the mirror with Philips screwdriver; (Please bring your own knife and screwdriver.)
2.  Disconnect the wire from the connector and unscrew the nut;
3.  Use a utility knife to cut the sticker inside along the edge of the bulb, twist the bulb until it comes out;
4.  Remove the sticker on the back side of the spare bulb, stick on the mirror after locating it on the hole;
5.  Get the nut through the two wire of the spare bulb and tighten it;
6.  Connect the wire with connector (Please ensure the connector is inserted with red wire on one side and blue wire on other side);
7.  Install the back board.

Hollywood Mirror Specifications

CLEANING & MAINTENANCE

•  Always unplug the mirror before cleaning.
•  Do not immerse the mirror in water or any other liquid when cleaning.
•  Do not use harsh or abrasive cleaners or furniture polish on mirror surface or any portion of the base.
•  Clean the mirror with any dry soft cloth. Slightly moisten cloth with water. A damp cloth holds dust, wipe sudden blot spills and prevents scratching.
•  Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-tighten if necessary.

STORAGE GUIDES

•  If mirror is not in use, disconnect from electrical outlet.
•  BE SURE DIRECT SUNLIGHT WILL NOT STRIKE MIRROR WHEN LEFT UNATTENDED (reflected sunlight may cause fire).
•  Allow to cool to room temperature before storing.
•  Place in cool, dry area out of reach of children, and where it will not be damaged.
•  Handle cord carefully for longer life. Do not jerk or strain at plug connections or wrap cord around mirror for storage. This could cause the cord to become damaged and short-circuit. To store mirror coil cord loosely, starting at the appliance, and place cord in large loops next to mirror or secure cord with a twist tie.

100% Quality Guarantee & 1-Year Limited Warranty!

We offer a 1 Year limited warranty from date of purchase against defects in materials and workmanship. This warranty does not include damage to the product as a result of misuse or accident. Should your product become defective during the warranty period, we will repair or replace (at our sole discretion) your product, at no charge. READ ALL INSTRUCTIONS PRIOR TO INSTALLATION AND USE. ATTENTION PLEASE – Mirrors are fragile, though they have been packaged very secure, they may get damaged during shipment. If you receive shattered mirror or broken package box, please contact us first for the best solution. If you need to return to Amazon, please choose the return reason “damaged by carrier” so as to speed up the processing of return/refund orders.
Email: Service@hollywoodmirror.net.
website: www.HollywoodMirror.net.
Customers Come FIRST! – IF YOU HAVE ANY ISSUES, PLEASE CONTACT US BEFORE LEAVING A NEGATIVE REVIEW, GIVING US A CHNACE TO SOLVE PROBLEMS, WE WILL DO OUR BEST TO SATISFY YOU OR FULLY REFUND! Procedures to follow should you have any questions: You can also contact us freely to order parts, ask for assembly instructions, and get answers with any questions. In order for us to provide you with the best service possible, please include the following information in your email: (Highly appreciated if you could offer some photos/videos for reference)

FCC

NOTE : This equ

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>