MB Quart Nautic NSB10V1 10-Speaker Bluetooth Soundbar User Manual

: June 3, 2024
: MB QUART

Table of Contents

MB Quart

MB Quart

MB Quart Nautic NSB10V1 10-Speaker Bluetooth Soundbar

MB-Quart-Nautic-NSB10V1-10-Speaker-img

Specifications

FREQUENCY RESPONSE: 40 – 35000 Hz
NOMINAL IMPEDANCE: 6 Ohms
SENSITIVITY: 85 dB
RECOMMENDED POWER: 100 – 200 Watts
DRIVER CONFIGURATION: 2 – Way
ENCLOSURE TYPE: Rear Ported
PRODUCT DIMENSIONS (HWD): 13″ x 7.5″ x 9″ / 330mm x 190mm x 229mm
PRODUCT WEIGHT: 13 lbs. / 6 Kg each

Massive sound for the outdoors The NSB10V1 is ready to rock if you want to hear your music above the fun you’re having on your ATV. The ideal speaker for your high-end ATV audio system is this 10-speaker sound bar from MB Quart. This soundbar takes the party outside with a strong built-in amp, ten loud speakers, built-in Bluetooth, and LED lights. Ten speakers equal a powerful volume. This sound bar can really blare out your favorite music with its eight 3″ full-range speakers, two 1″ titanium dome tweeters, and integrated Class D amplifier.

Congratulations on your choice of MB Quart Nautic Sound Bars. This “Quick Start” Installation guide is meant to help you complete a basic installation. For more detailed information about the product, please visit our website at MBQuart.com

Wiring

Controls

Power – Will turn the unit on or off / Five second hold/ quick push will switch inputs.
Track BACKWARDS – Press to restart the current track or to back up to previous tracks.
Volume UP – Each press will increase the volume.
Volume DOWN – Each press will decrease the volume.
Track FORWARD – Press to advance to the next track.
Map Light / Illumination – Turn on Map Light, cycle through illumination settings.
PLAY / PAUSE – Press once to pause. Press again to play.

Bluetooth Device Pairing

The pairing process can vary based on your particular device. Refer to the operating instructions of your device. Below is the general process to connect.
During unit power up, the blue LED on the bottom of the control panel will blink indicating that it is in Bluetooth search mode.
During this process “MB Quart” should show up in your list of Bluetooth devices when the search has connected with your device. When the connection is made the blue LED will change to a solid color.
Once a device has been paired, the unit will reconnect at power up to that device when in range.
To connect to a different device, the first device will need to be disconnected.
When a phone call is received, the audio signal will mute but not disconnect.
To switch to 3.5mm press the power button quickly.
To switch back to BT press the power button again quickly.

WARRANTY

Maxxsonics USA Inc. warrants this product, to the original consumer purchaser, to be free from defects in material and workmanship for a period of one (1) year from the date of purchase. Maxxsonics USA Inc. will, at it’s discretion, repair or replace defective products during the warranty period. Components that prove to be defective in materials and workmanship under proper installation and use must be returned to the original authorized Maxxsonics USA Inc. retailer from where it was purchased. A photocopy of the original receipt must accompany the product being returned. The costs associated with removal, re-installation and freight are not the responsibility of Maxxsonics USA Inc. This warranty is limited to defective parts and specifically excludes any incidental or consequential damages connected therewith. To view the full warranty, please visit the website.

FREQUENTLY ASKED QUESTIONS

What kind of mounting hardware for a side by side or UTV is included?

It has a standard flat mount on each end and three distinct round tubing fittings.

How many speakers can you connect to a soundbar?

As many surround speakers as your receiver will support can be used. As long as your receiver permits it, you can create a 5.1, 7.1, 9.1, etc. sound system using this technique.

How many Bluetooth speakers can be linked?

You might be able to connect to two Bluetooth speakers at once, depending on the hardware you have. Newer technology has Bluetooth 5, which enables simultaneous pairing with two devices. Similar solutions have been developed by other device manufacturers.

Do soundbars work as well as speakers?

While surround sound speakers often produce the highest audio quality, a soundbar will undoubtedly enhance the audio on your TV. Even the most expensive soundbars typically cannot match the expansive soundstage provided by speaker systems.

How many watts Bluetooth speaker is good?

Any speaker with a wattage between 150 and 500 is ideal for a wonderful music listening experience and is inexpensive. Every sound has a frequency, which serves as a gauge for the volume of the sound. It’s quantified in Hertz (Hz). For improved sound delivery, it is crucial for a speaker to comprehend frequency.

Which Bluetooth allows multiple devices?

Multipoint pairing for Bluetooth was first made available in Bluetooth 4.0. This technique enables numerous devices to simultaneously connect to a Bluetooth device.

What can I get instead of a soundbar?

A surround-sound system is probably what you want if you enjoy home theatre. A soundbar, regardless of price, cannot compare to the audio experience provided by a 2.1, 5.1, or an Atmos 5.1. 4-channel setup.

What does a Bluetooth soundbar do?

Now that more soundbars have Bluetooth capabilities, you may wirelessly transfer music from tablets, phones, or PCs to the soundbar speaker.

Are Bluetooth soundbars worth it?

Yes, soundbars are worthwhile investments because they greatly improve your audio quality and outperform your TV speaker. They also have additional practical functions that can connect to other media appliances in your home. A soundbar placed in front of your TV does a great job of enhancing the sound.

Can I use a Bluetooth soundbar on my TV?

Yes, soundbars are worthwhile investments because they greatly improve your audio quality and outperform your TV speaker. They also have additional practical functions that can connect to other media appliances in your home. A soundbar placed in front of your TV does a great job of enhancing the sound.

Is it worth getting a sound bar?

Soundbars are indeed worthwhile. For home entertainment systems that offer fantastic sound, are simple to use and set up, and are intuitively built to interact with all of the most recent technology, soundbars are an economical, fashionable option.

Is WIFI or Bluetooth better for soundbar?

Bluetooth speakers tend to be more portable and better for smaller settings than Wi-Fi speakers, which is the difference between the two types of speakers. Wi-Fi speakers typically require constant power connections but have a greater range, higher music quality, and less chance of having their signal disrupted.

Do you need a soundbar for Smart TV?

An important investment to improve your entertainment experience is a soundbar. Your cinematic experience will be enhanced and you will have a far more distinctive understanding of the subject you are seeing if you invest in a soundbar.