melodySusie P Series Manicure and Pedicure Nail Drill Kit User Manual

: June 4, 2024
: melodysusie

Table of Contents

IMPORTANT SAFEGUARDS
EIGHT DRILL BITS
- HOW TO USE
- CHARGING
PROBLEM AND TREMS OF SETTLEMENT
SPECIFICATIONS
WARRANTY AND CUCSTOMER SERVICE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Manicure & Pedicure

Nail Drill Kit

User Manual

Thank you for choosing Melody Susie! Please read this user guide carefully and keep it in an accessible location so you may refer to it later.

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS BEFORE USING.

To reduce the risk of burns, electrocution, fire, or injury to persons. Please be sure to read the safety instruction as follow to avoid potential hazards that could result in personal injuries or damage to the device.

Note: If the charging cable connects to the adapter, it is recommended to use an adapter of 5V 2A.Please do not exceed 5V 2A, or the drill will burn out.

CHECK BEFORE USEING

Check the power supply cord before the first use and during the life of the device. Do not use this device if it has a damaged cord or it is not working properly or damaged.
Do not plug this device into a voltage system that is different from the voltage system specified on the device. Use with improper voltage will damage the device and VOID warranty.
Please use the original cord only.

NOTE FOR BATTERY

The Battery needs to be charged fully before first use to ensure optimal performance.
Do not overcharge the device or use it when it is charging.
Charge the device in well-ventilated condition with 0 C —40 C. Do not charge the device close to flammable or explosive materials. When charging the device, please do not cover it with clothes or other things.
If the device is not used for long periods of time, you should charge and discharge once every three months. In normal conditions, the battery performance will decline over several years.

NOTE FOR USING

Do not touch the cord with the wet hand to prevent electric leakage and shock or fire. Please turn the power off after use.
Do not use the crooked or damaged nail drill bit or replace the bit when the power is on.
Adjust the speed gradually, not abruptly. Please stop to use once the unusual movement and noise happens.
Misuse, dropping or excessive force may cause device damage.
Children under 18 years of age should not use this device without parental consent and supervision.

MAINTENANCE WORK

Do not disassemble the device. Doing so could be dangerous and constitutes voiding warranty conditions.
Do not keep the device in a place which is about or more than 50t(in a metal box, car or other places in high temperature). Keep the device dry and keep it away from the oil and grease.
Store the device in a cool and dry place. Do not store it in a hot or humid environment.
Keep electrical cord away from heated surfaces.
Do not dispose of the device in heat or fire.
Do not clean the device with harmful chemicals or detergents.

NOTE FOR INJURY

Having manicures done frequently can cause injuries to the nails as well.
Do not use the device if you have an open wound on your nail or hand.
If you have any skin diseases, heat-sensitive, allergic reaction, onychomycosis or any other disorder, you should consult your doctor and medical professional before using the device.

The operator shall be responsible for any consequences including product damage or accidents if not strictly complies with the instructions. If you require any technical support, contact us at service@melodysusie.com or service.uk@melodysusie.com SAVE THESE INSTRUCTIONS

EIGHT DRILL BITS

Remove calluses on the soles of the foot.

Remove hard skin and corns on the soles of the foot.

Remove calluses on the soles of the heel.

Reduce thick toenails calluses, and remove cracks on heels.

Eliminate dust polishing, and matting,

Thick and fragile nails and trimming, grinding, and polishing.

Clean cuticle area and sidewalls. Clean dirt from under the nails.

Remove product In sidewalls and remove callused skin around sidewalls.

Prevent dust splashing. Need to be used together with bits.

HOW TO USE

Step 1: Choose one nail drill bit, and insert the drill bit into the hand piece in place.

Step 2: Control the Forward/ OFF/ Reverse button to turn the device on/off or change the rotation direction.

Step 3: Press the Speed Control to accelerate or decelerate the rotation speed.

CHARGING

Take out the cord and connect it with the charging port and wait for a full charge.
It cannot be used while charging. The Battery needs to be charged fully before first use
When the power is plugged in, the white light flashes when charging, and the white light stays on when fully charged.
When in use, the indicator light flashes if the power is lower than 20%.
The charging time is about 2 hours.

PROBLEM AND TREMS OF SETTLEMENT

Misoperation	Causing	Terms of settlement
Changing the nail drill bit when the power is on	1.Motor burns out
2. Bearing damages (Loud Noise)	Turn off the power when changing the nail

drill bit
The power is on when not in use| Turn off the power when not in use
Over Charge| 1. Battery lifespan shortens| Not exceed the specified charging time
Long time. Large load work| 1. Motor burns out

2. Device lifespan shortens

3. Bearing damages (Loud Noise) 4. Handpiece damages

| The continuous working time should not be too tong when the working condition is In heavy load. When the device is overheating. it should be stopped Immediately to make it return to normal temperature.

Insert into a mismatched power supply| 1. Motor burns out| According to the device voltage requirements, insert the matching power supply
Put the power cord at random/ Pull the power cord/ charging Use the device when charging| 1. Battery damages and device life span shortens

2. Power cord brokes

3. Poor connection

4. Easy to cause short circuit

| Do not pull the power cord/Do not use the device when charging

Replace the original charger randomly

| 1. Device charging unsuccessfully

2. Battery damages

3. Easy to cause short circuit

| Use the original specification charger

Dust into device

| 1. Bearing damages (Loud Noise)

2. Motor gets hot

3. Rotational speed slows down

4. The potentiometer speed regulation fails

5. Hand piece damages

| Clean dust, add the dust-proof protection of the dustproof hood/Avoid device drops or by other impacts

Device drops to the wound or by other impacts

| 1. The Forward/OFF/ Reverse button doesn’t work

2. The potentiometer speed regulation fails

3. Hand piece damages

| Avoid device drops or by other impacts ( If the hand piece was damaged, Ii can be purchased separately. )

Replace drill Ca when handpiece is not completely stopped| 1.The handpiece stocks and cannot be turned on

2. Hand piece damages

| Do not replace drill bit when handpiece is not completely stopped
The size of drill bit is not suitable| Cannot insert the drill bit into the device| Use standard drill bit
Water into the device/Operate in wet or moist conditions/Use a wet cloth to clean the device| 1. Motor burns out

2. Device Weapon shortens

| Do not operate in wet or moist conditions/Only a dry cloth Is allowed for cleaning

SPECIFICATIONS

Input voltage range: SV/ 2A

Email. US: service@melodysusie.com

UK: service.uk@melodvsusie.com

Website: www.melodysusie.com

WARRANTY AND CUCSTOMER SERVICE

Melody Susie offers a 6-month limited warranty on quality related issues. Please apply for your extra 6-month warranty extension and download the user manual in other languages by registering on www melndysuste min if needed.