KAN 21 Therm PP Stabi Pipes User Manual
- June 3, 2024
- KAN
Table of Contents
KAN 21 Therm PP Stabi Pipes User Manual
-
Name and trade name of building product:
System KAN-therm Stabi pipes PP-R/Al/PP-R stabilized by aluminium layer:- PN16 (S3,2/SDR7,4) DN 20 – DN 110
- PN20 (S2,5/SDR6) DN 16 – DN 110
-
Designation type of building product:
System KAN-therm PP – PP-R Stabi Pipe -
Intended use or uses:
For use in internal installations of cold and hot utility water, drinking water, chilled water, compressed air, central heating radiator and cooling systems, where the working medium is water or a water-glycol solution (up to 50%)in accordance with the “Designer’s and contractor’s guide” published by KAN Sp. z o.o., catalog and the guidelines of the KAN Technical Department. -
Name and address of the producer and place of manufacture:
KAN Sp. z o.o.
Zdrojowa 51 PL-16-001 Białystok-Kleosin
Poland
www.kan-therm.com e-mail: kan@kan- therm.com -
Name and address of the authorized representative, if appointed: not applicable
-
Domestic system used for assessment and verification of performance constancy:
System 3 -
National technical specification:
7a. Polish product standard:
Not applicable.
7b. National technical assessment:
ITB-KOT-2021/1904 edition 1 – Multilayer pipes PP-R / Al / PP-R KAN-therm PP Stabi stabilized with
an aluminum layer of the KAN-therm PP system
ITB Warsaw – PCA accreditation No.AC 020. -
Declared performance:
-
The performance of the product described above is in accordance with all of the declared performance characteristics mentioned in point 8. This national declaration of performance is issued in accordance with the Act of 16 April 2004 regarding construction products, under the sole responsibility of the manufacturer.
On behalf of manufacturer signed by:
Manager of the Quality Assurance Department
Janusz Żukowski
(signature)
Kleosin – 06.12.2021
(place – date of issue)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>