xiaomi XD-CCJQR03 Lydsto Window Cleaning Robot Instruction Manual
- June 10, 2024
- Xiaomi
Table of Contents
XD-CCJQR03 Lydsto Window Cleaning Robot
Product Information
The Lydsto Window Cleaning Robot is a highly efficient and user-friendly cleaning solution for windows. It comes equipped with various modes of cleaning, including automatic cleaning, deep cleaning, and fixed-point cleaning. The robot is designed to clean windows of different sizes and shapes and can easily navigate around obstacles. It also features a safety lock assembly that ensures safe use during operation.
Component Names
The Lydsto Window Cleaning Robot consists of the following components:
- Host (with safety rope and components and power cord)
- Rag
- Remote control
- Adapter
- Plug
- Instruction Manual
- Measuring flask
front of main unit
Back of the main unit
Operation Modes
The robot has three modes of operation:
- Automatic cleaning : Press the button to automatically clean the entire glass in an N shape, and return to the origin after cleaning.
- Deep cleaning : After pressing the button, first clean one side of the glass in a Z shape, and then clean the other side of the glass in an N shape, and return after cleaning back to the start.
- Fixed-point cleaning : Press the button and then wipe the current position back and forth (cm distance) for times.
Usage Instructions
Before using the Lydsto Window Cleaning Robot, please read the instruction manual carefully and keep it properly. Follow the steps below for safe and efficient usage:
- Secure the safety lock : To ensure safe use, attach the safety catch to a strong metal rod.
- Connect the main unit power cord, adapter, and plug. Do not disconnect the power supply when the main unit is running; if you disconnect the power supply, there is a risk of falling.
- Spray cleaning fluid: It is recommended to spray about times evenly on the wide side of the cleaning rag area.
- Select the desired cleaning mode on the remote control and start the cleaning process. If the machine wants to switch the working mode during the working process, it must first press pause and then press other working modes to be effective.
- After using the robot, replace the used rag with a clean one or save it without sticking the rag. When cleaning the track wheels, use a wet tissue to wipe off the dirt on the track wheels and avoid track wheel marks when wet rubbing later. Do not use a rag or dry paper towel to clean the track wheels.
Follow these instructions carefully to ensure safe and efficient usage of the Lydsto Window Cleaning Robot. Please read this manual carefully before use and keep it properly
Important tip
Warn
Before using this product, please read all contents of this manual carefully
and install the machine according to the steps of this manual. Take care of
this manual. If you pass the product to a third party, please accompany this
manual with the machine. Any operation that does not conform to the
instructions in the manual may result in product damage or serious personal
injury. This product is only suitable for operation and use in a conventional
domestic environment, not for industrial or outdoor use.
- The product is not intended for use by persons with physical, sensory or intellectual disabilities, or persons lacking expe-rience and common sense (including children), unless supervised or instructed to ensure their safe use.
- Do not touch the plug or any live part of the product with wet hands to avoid the risk of electric shock.
- If the charger or plug is damaged, please stop using it. Please call our company’s professional maintenance personnel for replacement to avoid hazards.
- When using, if you find the leakage of electricity or the motor temperature is too high and abnormal sound, such as the body overheating, abnormal sound, smell, etc., you should stop using it and call the company’s professional maintenance personnel.
- When charging, please use the charger specially designed for you by our company; other types of chargers may cause battery failure or extreme thermal effects.
- If you do not use this product for a long time, you should turn off the power and unplug the charging base.
- After using the machine, please store it in a dry place. A damp place will affect the insulation and service life of the electri-cal appliance.
- When the machine fails, do not repair it by yourself, please call our company’s after-sales department for help.
- All technologies and other data reflected in this product manual are obtained by our company or a designated third-party testing company, and the final interpretation right belongs to our company.
- Cannot be cleaned on wet glass, it will cause the machine not to work properly.
- Can not be used on glass with seam, the machine may leak and fall after directly crossing the seam.
About Cleaning Solutions
- If a large amount of cleaning solution is added, more foam will be generated during use, which may penetrate into the motor and cause danger.
- Proportion cleaning according to the instructions for use. It is recommended to use the cleaning agent produced by our company and the manufacturer approved by our company, and shall not contain acid, alkali solution or environmentally harmful substances.
- Cleaning agents should be kept out of the reach of children. If cleaning solution accidentally gets into eyes, rinse thoroughly with clean water. In case of accidental ingestion, seek medical attention immediately.
- When disposing of sewage and cleaning solutions, local environmental regulations should be followed.
Parts List
Remote Control Instructions
How to use
Before use, please make sure that the safety lock assembly has been installed on the host to avoid danger. The safety lock assembly is pre-installed at the factory, please do not remove it at will.
App connection
This product has been connected to Lydsto, can be controlled th rough the
Lydsto APP, and interconnected with other products. Scan the QR code, download
and install the Lydsto APP, users who have installed the Lydsto APP will
directly enter the device connection page. Open the Lydsto APP homepage, on
the upper right of the page Click “+” in the corner to add devices according
to the APP prompts.
Tip : Due to the upgrade and update of the Lydsto APP, the actual operation may be slightly different from the above description, please follow the instructions in the current Lydsto APP.
Reset Wi-Fi
When the machine is turned on and there is no adsorption and no bottom up,
press and hold the button for 5 seconds, hear the buzzer “beep”, the WI-Fi
reset is successful, and the host enters the network configuration mode
Connect the main unit power cord, adapter and plug
Do not disconnect the power supply when the main unit is running; if you
disconnect the power supply, there is a risk of falling.
Preparation before use
Secure the safety lock: To ensure safe use, be sure to secure the safety lock
before use. It is recommended to attach the safety catch to a strong metal
rod.
Spray cleaning fluid
- It is recommended to spray about 2 times evenly on the wide side of the cleaning pad. Avoid spraying on the drive wheel tracks and make sure the tracks are dry to avoid slipping. Do not spray cleaning fluid directly on the glass.
- After spraying, use a dry cloth to wipe off the excess cleaning fluid on the chassis to avoid slippage when the machine is working.
- Please use the cleaning solution specially formulated by our company. The use of non-specialized cleaning solution may result in poor cleaning effect or product damage.
Clean the area to be adsorbed
Before you start, if there is too much dust on the glass surface, wipe out a
clean area the size of the console for the console to absorb.
Start cleaning
Make sure the bottom of the console is powered on. Press the four ball heads
at the bottom of the main unit on the glass, and the main unit will adsorb
itself start planning the cleaning with a bow-shaped path.
- When cleaning frameless glass, the suction position should not be too close to the edge, it is recommended to be more than 10cm away from the edge.
- The main unit can only clean flat surfaces. Please make sure the glass thickness is not less than 3mm.
- Do not put the fan close to small objects such as hair after turning it on, so as not to block the fan.
Pause
During the working process, you can short press the host key to suspend the
host work.
End work
- Remove the main unit: After the cleaning is completed, the main unit will return to the vicinity of the starting position and sound a beep. Please hold the handle tightly, press for about 3 seconds, the suction of the fan will decrease, and then remove the main unit.
- Power off : Turn the bottom power switch to the “OFF” end.
- Remove the safety lock
- Disconnect the power
Maintenance
A.Change the rag
Remove the dirty rag, and stick the new rag (dark side up) flatly inside the
cleaning bracket at the bottom of the main unit. Please note that the width of
the cleaning rag corresponds to the width of the rag holder. Be careful not to
stick the cleaning pad outside the rag holder, so as not to affect the normal
operation of the host
B.Cleaning the rag
Remove the rag, soak it in water at about 20°C for 2 minutes, then brush it
with a soft brush, do not rub or wring it dry, let it dry naturally before
use. Do not use the cleaned rag directly to avoid the host from slipping
during the working process.
When the cleaning pad becomes thin and damaged, and cannot stick closely to the magic, please replace it in time to achieve the best cleaning effect. If you want to buy accessories, please buy them from official channels.
Clean the drive wheel tracks
- Before cleaning, please make sure that the power switch at the bottom of the main unit has been turned to “ON” and the fan is on.
- Remote control the host through the App or long press the front start/stop button to check the drive wheel track. If you find dirt, please pause first, spray the cleaning solution twice on a clean dust-removing rag, and wipe the track clean.
- After cleaning, you can install the cleaning pad to continue working, or turn the power switch at the bottom of the host to “OFF” to stop working.
- Fan : wipe it with a dry rag to avoid damage to the suction of the host.
- Floating head : wipe it with a dry rag to prevent the machine from getting stuck during the wiping process
Lighting effect tips
| Lighting effect | State |
|---|---|
| Blue light on Blue light on and | State |
The host is fully charged.
The host has successfully adsorbed the glass and can start cleaning.
Host suspended.
dark interchange| The machine is working.
Steady red light| Host is charging.
Flashing red light| If the host alarms, please refer to the [Common
Troubleshooting] chapter to solve it.
Each time the power switch is turned on, it will be attached to the glass for the first
Blue light
flashes quickly| Each time the power switch is turned on, it will be attached
to the glass for the first
time and the gyroscope will be calibrated for 3 seconds.
At this time, the blue light flashes rapidly, and the work canno t be started
during
calibration
Red and blue lights
flash alternately| If the host alarms, please refer to the [Common
Troubleshooting ] chapter to solve
it.
Product Parameters
| Product name | Window Cleaning Robot | Product model | XD-CCJQR03 |
|---|---|---|---|
| Working voltage | 24V | Working current | 3A |
| Rated power | 72W |
TROUBLESHOOTING
Due to the need for continuous improvement of the product, the product in this information is subject to the actual product, and our company reserves the right to update the product
- Manufacturer ： Guangdong Xiaoda Technology Co.,LTD.
- Address ： Room 701, No. 5, Songhu Zhigu R&D Center, No. 1,Renju Road, Liaobu Town, Dongguan City, Guangdong Province
- Service number ：+864000776967
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an autlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>