somogyi TF 32 Fan Instruction Manual
- June 3, 2024
- SOMOGYI
Table of Contents
Somogyi TF 32/BK Fan Instruction Manual
figure 1.
STRUCTURE (Figure 1.)
- front part of grid
- blade fastening nut
- fan blade
- grid fastening nut
- rear part of grid
- motor axle
- motor
- switch of oscillation
- stand
- speed level switches
- base
- screws
IMPORTANT SAFETY INSTRUCTIONS
READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USE AND RETAIN IT FOR LATER REFERENCE!
WARNINGS
- Before using the product for the first time, please read the instructions for use below and retain them. The original instructions were written in the Hungarian language.
- This appliance may only be used by persons with impaired physical, sensory or mental capabilities, or lacking in experience or knowledge, as well as children from the age of 8, if they are under supervision or have been given instruction concerning use of the appliance and they have understood the hazards associated with use. Children should not be allowed to play with the unit. Children may only clean or perform user maintenance on the appliance under supervision.
- Make sure that the appliance has not been damaged in transit!
- The appliance must not be used with programmable timers, timer switches or stand – alone remote controlled systems that can automatically turn the unit on because any covering or improper location of the unit can cause an accident.
- Do not use in locations where flammable vapors or explosive dust may be present. Do not use near flammable materials or in potentially explosive atmospheres!
- Operate only under constant supervision!
- Do not operate unattended in the presence of children!
- Only for indoor use, in a dry place. Protect from humidity (e.g. bathrooms, swimming pools)!
- It is PROHIBITED to use the unit near bathtubs, basins, showers, swimming pools or saunas!
- It is prohibited to use the appliance in motor vehicles or in confined spaces (<5 m2 ) such as elevators!
- When not planning to use the unit for an extended period of time, switch it off then remove the power plug from the outlet!
- Always remove power from the appliance before relocating it!
- Only move it by using the carrying handle!
- If any irregular operation is detected (e.g., unusual noise or burnt odor from unit), immediately switch it off and remove the power plug!
- Make sure that no foreign objects or liquid can enter the appliance through the openings.
- Protect from dust, humidity, sunlight and direct heat radiation.
- Power off the unit by unplugging it from the electric outlet before cleaning!
- Always power off the fan before removing or fastening back the protective grid, by unplugging it from the electric outlet!
- Never touch the unit or the power cable with wet hands!
- The appliance may only be connected to 230 V~ / 50 Hz electric wall outlets!
- Unwind the power cable completely!
- Do not lead the power cable over the appliance!
- Do not lead the power cable under carpets, doormats, etc.!
- The appliance should be located so as to allow easy access and remove of the power plug!
- Lead the power cable so as to prevent it from being pulled out accidentally or tripped over!
- The actual instruction manual can be downloaded from www.somogyi.hu website.
- We don’t take the responsibility for printing errors and apologize if there’s any.
- The unit is intended for household use. No industrial use is permitted!
Caution: Risk of electric shock! Do not attempt to disassemble of modify the unit or its accessories. In case any part is damaged, immediately power off the unit and seek the assistance of a specialist.
In the event that the power cable should become damaged, it should only be replaced by the manufacturer, its service facility or similarly qualified personnel.
ASSEMBLY OF THE DEVICE
- Fasten the base (11) with 4 pcs screws to the stand (9).
- Place the rear part of the grid (5) onto the motor so as to get the carrying handle facing upwards.
- After that fasten the grid fixing nut (4).
- Push the blade (3) to the motor axle (6), and then fix it with the nut (2).
- Attach the front grill (1) to the rear part, and tighten it with the bolt to fastening grid parts.
CLEANING
In order to ensure optimum functioning, the unit may require cleaning at least once a month, depending on the manner of use and degree of contamination.
- Prior to cleaning switch off and power off the unit by unplugging it from the electric outlet!
- Attention! Remove the front part of grid when the fan is not under power!
- Use a slightly moistened cloth to clean the unit’s exterior. Do not use any aggressive cleaners. Avoid getting water inside of and on the electric components of the appliance!
- Attention! Put back and fasten the protective grid to the fan, when it is not under power!
- Only reinstall the fan afterwards!
TROUBLESHOOTING
Malfunction | Possible solution |
---|---|
The fan doesn’t turn on. | Check the power supply. |
Check the switches.
The fan does not oscillate.| Check the switch of oscillation.
DISPOSAL
Waste equipment must be collected and disposed separately from household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.
FEATURES
- nominal blade diameter: 30 cm
- adjustable output (3 stages)
- fixed standing or oscillation (90°)
- controllable dip angle of head
- dense grid
- black
THE FAN OPERATION
The fan can be switched on and target speed stage can be adjusted with 1, 2 or
3 speed level switches (10). By pushing down the switch of oscillation (8),
oscillation can be switched on, by pulling it up, it can be switched off. You
can switch off the fan with 0 button.
Dip angle of the head can be adjusted simply, there’s no need to loosen or
fasten any screws.
TECHNICAL SPECIFICATION
power supply: 230 V ~ / 50 Hz / 40 W
protection class: II.
maximum fan – air mass volume: F = 31,58 m3 /min
fan input power: P = 36,32 W
service value: SV = 0,87 (m3 /min)/W
power consumption during standby position: PSB = 0 W
noise level: LWA = 54,3 dB(A)
maximum air speed: c = 2,437 m/sec
service value standard: IEC 60879:1986 (corr. 1992)
ventilator height: 50 cm
ventilator weight: 1,9 kg
Producer
SOMOGYI ELEKTRONIC® • H – 9027 • Győr, Gesztenyefa út 3. •
www.somogyi.hu
Distribútor: SOMOGYI ELEKTRONIC SLOVENSKO s. r. o.
Ul. gen. Klapku 77, 945 01 Komárno, SK • Tel.: +421/0/35 7902400 •
www.somogyi.sk
Distribuitor: S.C. SOMOGYI ELEKTRONIC S.R.L.
J12/2014/13.06.2006 C.U.I.: RO 18761195
Cluj-Napoca, judeţul Cluj, România, Str. Prof. Dr. Gheorghe Marinescu, nr. 2,
Cod poştal: 400337
Tel.: +40 264 406 488, Fax: +40 264 406 489 •
www.somogyi.ro
Uvoznik za SRB: ELEMENTA d.o.o.
Jovana Mikića 56, 24000 Subotica, Srbija • Tel:+381(0)24 686 270 •
www.elementa.rs
Zemlja uvoza: Mađarska • Zemlja porekla: Kina • Proizvođač: Somogyi
Elektronic Kft.
Uvoznik za HR: ZED d.o.o.
Industrijska c. 5, 10360 Sesvete, Hrvatska • Tel: +385 1 2006 148 •
www.zed.hr
Uvoznik za BiH: DIGITALIS d.o.o.
M.Spahe 2A/30, 72290 Novi Travnik, BiH • Tel: +387 61 095 095 •
www.digitalis.ba
Proizvođač: Somogyi Elektronic Kft, Gesztenyefa ut 3, 9027 Gyor, Mađarska
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>