LUMASCAPE LS3042 Erden E4 Foundation Instruction Manual

LUMASCAPE LS3042 Erden E4 Foundation

INSTALLATION INSTRUCTION

• MODEL LS3042
• PART NUMBER LS3042 – 18D xxx x x xx xx 23 x 01 xx
• LS3042 – 18D xxx x x xx xx 23 x 09 xx
• INSTALLATION TYPE INGROUND/IN-GRADE (Pre-Install)
• IP RATING IP66/67 (Passes IP68 Test)
• SUPPLY VOLTAGE 220-240 ~Vac, 50 Hz
• 120/277 ~Vac, 60 Hz
• INSTRUCTIONS COVER Single Color (Non-Dimmable)
• Single Color Dimming (Dali, 0-10 V)
• DIMENSIONS (LxWxH) 8.3” x 8.7” (210 x 220 mm)
• WEIGHT 8.8 lbs (4.0 kg)
• SURFACE TEMPERATURE < 149 ºF (65 ºC)
• STATIC LOAD RATING 3,968 lbs (1,800 kg)

Please read and follow all safety instructions carefully. Failure to do so will void warranty.
WARNING – Product Warranty is void if product is not installed as per installation instructions and in compliance with all local and provincial codes.

• › Ensure installation complies with local electrical rules and regulations.
• › All electrical work must be performed by a licensed electrician.
• › Protective earth; protective ground (symbol 7).
• All luminaires may become hot. Use discretion on where the luminaire is mounted. Take care when setting luminaire as it may become hot. Luminaire should only be used complete with protective shield. If protective shield is cracked, immediately stop using luminaire. Isolate light source, keep it dry and immediately contact Lumascape for replacement of protective shield (symbol 11).
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by Lumascape or their service agent in order to avoid a hazard.
• Do not stare at the operating light source. The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 23’ (7 m) is not expected (symbol 13)
• Basic insulation has been maintained between line voltage and the control conductors.
• To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm’s reach.
• Ensure mains input power is surge protected.
• Never make or break connections while the circuit is energized.
• Do not make modifications or alter the product.
• Keep luminaire clean and free of debris.
• Only clean with warm water.
• Do not use chemicals or abrasives to clean luminaire as this may void the product warranty.
• Connections are to be kept clean and dry at all times.
• Suitable for use indoors or outdoors.

Tools Required

Included Components

Composants inclus

• 3 mm Allen Key
• Brackets & Fixings
• Blockout Lid
• Adhesive Screw Covers
• Desiccant Sachet
• Preinstallation Kit

Optional Accessories

Accessoires optionnels

• Do Not Use Power Tools on Screws
• Keep Electronics Free From Dirt and Moisture
• No Downward Force

• Keep Away from Flammable Materials
• Do Not Hose or Pressure Clean
• Do Not Overtighten
• Do Not Use Silicone On the Outside Surface
• Do Not Cut Cable to the Luminaire

CAUTION Risk of Electric Shock

Assembly Instructions

Optional Glare Control Accessories

Wiring Designations

Non-Dimmable (3-Core) – International

DALI (5-Core) – International

Non-Dimmable (3-Core) – North America

0-10 V (5-Core) – North America

Dimensions

Please recycle the aluminum trim according to Local Government Guidelines. Veuillez recycler la garniture en aluminium conformément aux directives du gouvernement local. Si prega di riciclare il rivestimento in alluminio secondo le linee guida del governo locale. Bitte recyceln Sie die Aluminiumverkleidung gemäß den Richtlinien der lokalen Regierung. Genbrug aluminiumsbeklædningen i henhold til lokale myndigheders retningslinjer. Recicle la moldura de aluminio de acuerdo con las pautas del gobierno local.
Optional Glare Control Accessories
ARCHITECTURAL & FACADE LIGHTING | Learn more. Visit lumascape.com

Find more product resources at lumascape.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>