Laserliner SensoMaster M350 High Performance Laser Receiver Instruction Manual
- June 4, 2024
- Laserliner
Table of Contents
- SensoMaster M350 High-Performance Laser Receiver
- ****SensoMaster M350
- Special product features and functions
- Insertion of batteries
- Working with the laser receiver
- Grade indication arrows
- Accuracy
- Switch units of measurement
- Backlighting
- Loudspeaker beep
- Technical data
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SensoMaster M350 High-Performance Laser Receiver
Instruction Manual
****SensoMaster M350
Completely read through the operating instructions, the „Warranty and Additional Information“ booklet as well as the latest information under the internet link at the end of these instructions. Follow the instructions they contain. This document must be kept in a safe place and passed on together with the device.
Function / application
High-performance laser receiver with extremely large receiving range for red
and green rotary lasers
– Receives information on the height which is shown on LC displays at front
and rear and by three bright LEDs to the front
– Beep acts as an acoustic signal
– LC displays show the height difference to the laser level and graphically
using arrows and the central line as well as numerically
General safety instructions
– The device must only be used in accordance with its intended purpose and
within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of
children.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme temperatures or
significant vibration.
– The device must no longer be used if one or more of its functions fail or
the battery charge is weak.
– Risk of pinching! Do not reach into the clamping bracket!
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility regulations
and limit values in accordance with EMC-Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol
stations or in the vicinity of people with pacemakers – may apply. Electronic
devices can potentially cause hazards or interference or be subject to hazards
or interference.
- Unit cm / mm
- Numeric elevation
- Grade indication arrows: Hand-held receiver below, precisely on or above laser level d Loudspeaker beep indicator
- Accuracy (Deadband) indicator
- Low battery indicator
- Backlighting ON/OFF
- Green LED: Precisely on the laser level Red LEDs: Hand-held receiver above or below laser level
- Vertical vial
- ON/OFF button
- Loudspeaker beep
- Horizontal vial
- Receiver field for laser beam
- LC display
- All-round marking groove
- Convert unit cm / mm; Backlighting ON/OFF
- Accuracy
- Threaded hole for locating the universal retainer
- Magnets
- LC display (rear side)
- Battery compartment
Special product features and functions
| The receiver speeds up response times – rapid detection accelerates work
rates.
---|---
| For many measuring tools, the key to optimum working is magnetic adhesion.
This leaves the hands free to complete other tasks
| Protection against dust and water – The laser receiver is exceptionally well
protected against dust and rain.
Insertion of batteries
Open the battery compartment and insert batteries according to the symbols. Be sure to pay attention to polarity.
ON/OFF
In order to preserve the battery life, the receiver switches off automatically if it is not used for around 15 minutes.
Working with the laser receiver
Set the rotary laser to maximum speed and switch the laser receiver on. It is able to detect the laser beam at a great distance now. Move the SensoLite up and down through the laser beam until the middle indicator appears. Mark the measured height at the perimeter marking groove.
Grade indication arrows
5 individual levels of grade information for above and below grade. The
horizontal bar indicates on-grade.
Out-of Beam display: a sequence of arrows will indicate if the receiver has
moved beyond the vertical reception range and will indicate which direction to
move to get back to the laser beam. The display can be turned on or off.
Accuracy
Set the accuracy by pressing button 10.
Switch between the three accuracies, coarse, medium, or fine, by repeatedly
pressing the button.
Switch units of measurement
Select centimeters (cm) or millimeters (mm) as the unit of measurement by briefly pressing button 9.
Backlighting
The backlighting is switched ON/OFF by pressing and holding the button (9).
Loudspeaker beep
Toggle button 4 to set the volume to loud, quiet, or off. One beep is emitted
at the selected volume when changed.
Universal mount
The laser receiver can be installed on leveling staffs with the aid of the
universal mount. The Flexi measuring staff is always recommended when
measuring from floor heights. It also allows you to determine heights directly
without any need for calculation.
Danger – powerful magnetic fields
Powerful magnetic fields can adversely affect persons with active medical
implants (e.g. pacemakers) as well as electromechanical devices (e.g. magnetic
cards, mechanical clocks, precision mechanics, hard disks). With regard to the
effect of powerful magnetic fields on persons, the applicable national
stipulations and regulations must be complied with such as BGV B11 §14
„electromagnetic fields“ (occupational health and safety – electromagnetic
fields) in the Federal Republic of Germany. To avoid interference/disruption,
always keep the implant or device at a safe distance of at least 30 cm away
from the magnet.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents, or solvents. Remove the battery(ies) before storing it for
longer periods. Store the device in a clean and dry place.
EU directives and disposal
This device complies with all necessary standards for the free movement of
goods within the EU. This product is an electric device and must be collected
separately for disposal according to the European Directive on waste
electrical and electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=AHU
Technical data
| Laser reception range | 350 m (The maximum range depends on the rotary laser) |
|---|---|
| Length of the receiver unit | 127 mm |
| Necessary rotation speed | 300 – 1100 RPM |
| Accuracy (Deadband, absolute) | ±1 mm / 50 m ± 5 mm / 50 m ± 10 mm / 50 m |
| Auto power off | 15 minutes |
| Protection class | IP 66 |
| Power supply | 4 x 1.5V LR6 (AA) |
| Operating time | approx. 40 hours |
| Operating conditions | 0°C…50°C, max. humidity 80% RH, no condensation, max. |
working altitude 4000 m above sea level
Storage conditions| 0°C…70°C, max. humidity 80% RH
Weight (incl. batteries, without universal retainer)| 426 g
Dimensions (W x H x D)| 77 x 178 x 35 mm
Subject to technical alterations. 21W12
SERVICE
Umarex GmbH & Co. KG
– Laserliner –
Möhnestraße 149, 59755 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: +49 2932 638-333
info@laserliner.com
Umarex GmbH & Co. KG
Donnerfeld 2
59757 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: -333
www.laserliner.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>