BIXOLON SPP-C300 Web Print SDK iOS User Manual
- June 9, 2024
- BIXOLON
Table of Contents
BIXOLON SPP-C300 Web Print SDK iOS
Copyright
© BIXOLON Co., Ltd. All rights reserved.
This user manual and all property of the product are protected under copyright
law. It is strictly prohibited to copy, store, and transmit the whole or any
part of the manual and any property of the product without the prior written
approval of BIXOLON Co., Ltd.
The information contained herein is designed only for use with this BIXOLON
product. BIXOLON is not responsible for any direct or indirect damages,
arising from or related to use of this information.
- The BIXOLON logo is the registered trademark of BIXOLON Co., Ltd.
- All other brand or product names are trademarks of their respective companies or organizations.
BIXOLON Co., Ltd. maintains ongoing efforts to enhance and upgrade the
functions and quality of all our products.
In the following, product specifications and/or user manual content may be
changed without prior notice.
Caution
Some semiconductor devices are easily damaged by static electricity. You
should turn the printer “OFF”, before you connect or remove the cables on the
rear side, in order to guard the printer against the static electricity. If
the printer is damaged by the static electricity, you should turn the printer
“OFF”.
Manual Information
This manual is to provide users with the necessary information to make good use of the mPrint function in an iOS environment.
Operating Environment
Operating System
- iOS V12.0 and later
Interface
Bluetooth, Wi-Fi, Ethernet
Printer Support
-
POS Printer
-
LABEL Printer
-
Mobile Receipt Printer
-
Mobile Label Printer
Useful Function
To select the proper printer when running the mPrint for the first time
Main Screen
Preview
You may set the number of copies, select the pages to print and edit the image
under the Preview menu. [Settings] – [Preview] option should be set as ‘used’.
Edit
Edit the image’s brightness, rotate and/or crop the image.
Setting
To set the options for printing.
When the Preview function is used the same settings can be done at the preview
screen.
POS/Mobile Printer
Label/Mobile Printer
**Share
**
To transfer printing data to the mPrint on any web-browsers or applications
that support sharing function. The transferrable printing data should be
formatted in an image, PDF or web-page
The others Function
Bluetooth Connection
-
Turn on the printer power.
-
Select [Settings] – [Bluetooth].
-
When ‘Bluetooth’ button enabled, Bluetooth devices available to connect shows up.
Select one of them.
-
Enter PIN number when prompted, and then click ‘Pair’. Default PIN number is 0000.
-
The connection is complete if ‘Connected’ is displayed to the Bluetooth device in ‘MY DEVICES’ as shown below.
Wi-Fi Connection
-
Turn on the printer power.
-
Select [Settings] – [Wi-Fi].
-
Network information of the printer can be checked. Corresponding information is referred to [RF Interface] – [ESSID] after conducting Selftest.
If Network mode is not configured to ‘INFRASTRUCTURE’ appropriately, refer to BIXOLON Net Configuration Tool manual to set it up.
To conduct Self-Test, press Power and Feed buttons simultaneously after turning the printer off.
-
Connect to Network of the AP which is connected to the printer.
-
If it is displayed as shown below, the connection is complete.
PDF File Save
- From iTunes, select ‘mPrint’ application (My Device-> File Sharing -> mPrint).
- Please select PDF files, and then drag and drop them into ‘mPrint Documents’
- When clicking Sync’, PDF files will be transferred to ‘mPrint’ application.
Revision history
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>