Danfoss EV221BW 10-22 Solenoid Valve Installation Guide
- October 30, 2023
- Danfoss
Table of Contents
Danfoss EV221BW 10-22 Solenoid Valve
Product Information
Solenoid Valve Type EV221BW 10 – 22
The Solenoid Valve Type EV221BW 10 – 22 is a product manufactured by Danfoss. It is a solenoid valve designed for use in water applications, and it has a drinking water approval certification. The wetted parts of this valve are in accordance with DVGW, 4MS, KTW, and W270. The maximum working pressure of this valve is 10 bar, and the maximum test pressure is 15 bar. This valve has a compact design and is easy to install. It can be used in a variety of applications, including irrigation systems, water treatment systems, and heating and cooling systems.
Product Usage Instructions
Before installing the Solenoid Valve Type EV221BW 10 – 22, ensure that you have read and understood the installation guide provided with the product. The valve has two positions: ON and OFF. To turn the valve ON, apply power to it. To turn the valve OFF, remove power from it. The valve has a 24-hour cycle time, which means that it will automatically turn ON and OFF at set intervals. The cycle time can be adjusted using the numbered buttons on the valve (1, 2, 3).
The valve has an identification (ID) number that can be used for tracking and maintenance purposes. When installing the valve, ensure that it is connected to the appropriate input and output pipes. The valve has a maximum working pressure of 10 bar, so ensure that the pressure in your system does not exceed this limit. After installation, test the valve to ensure that it is functioning correctly. If you experience any issues with the valve, refer to the troubleshooting section of the installation guide or contact Danfoss customer support for assistance.
Overview
Power
Installation Instructions
Dimension
Drinking water approval
CERTIFIED|
Valid in
|
Certificate no.
356 Inspected by DTI
EV221BW 15-22 BE| DK, SE| SCO1555-18 )
)__
http://publiccert.extweb.sp.se/sv/Product/List/
Wetted parts in accordance with DVGW, 4MS, KTW and W270
Visit: www.products.danfoss.com for further technical data
Any information, including, but not limited to information on selection of product, its application or use, product design, weight, dimensions, capacity or any other technical data in product manuals, catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, online or via download, shall be considered informative, and is only binding if and to the extent, explicit reference is made in a quotation or order confirmation. Danfoss cannot accept any responsibility for possible errors in catalogues, brochures, videos and other material. Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that such alterations can be made without changes to form, fit or function of the product.
All trademarks in this material are property of Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved.
Info for UK customers only: Danfoss Ltd., 22 Wycombe End, HP9 1NB, GB
© Danfoss | Climate Solution: 2022.12
References
- publiccert.extweb.sp.se/sv/Product/List/
- Danfoss Global Product Store | Homepage
- Danfoss Spain Product Store | Homepage
- Danfoss France Product Store | Homepage
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>