SLC S21008 Controller AC RF 1,5A 230V BuiltInDimmer Instruction Manual

S21008 Controller AC RF 1,5A 230V BuiltInDimmer
Instruction Manual

Important: Read All Instructions Prior to Installation

Function introductionc

Product Data

Input Voltage| Output Voltage| Output Power| Size(L x W x H)
---|---|---|---
100-240VAC| 100-240VAC| 1 x 400W max| 45.5x45x20.3mm

• Radio   Frequency: 868mhz
• Waterproof grade: IP20
• 100-240VAC Wide Input and Output Voltage
• 1 Channel Output, Up to 400W
• Input and Output with Screw Terminals, Safe and Reliable
• Triac Dimmable and Mosfet Dimmable
• Trailing edge dimming
• Innovative minimum brightness setting function
• Single Wire Push Switch Input for Push Dim Function
• Great Compatibility with Universal 8V-230V~ Input Push Switches
• Great compatibility with a variety of Perfect RF series single color remote controls
• To dim and switch single color dimmable LED lamps, traditional incandescent and halogen lights
• Mini Size, Easy to be Installed into a standard 86*86mm wall box

Safety & Warnings

• DO NOT install with power applied to device.
• DO NOT expose the device to moisture.

Operation

Do wiring according to connection diagram.
Pair RF Receiver with RF remote:

1. Connect and wire up the RF receiver correctly, power on.
2. Turn on the remote, click the “Learning Key” button on receiver, immediately click a zone number to pair the receiver to the specified zone if the remote is a multi-zone controller (if it is a single zone remote, this step is unnecessary), then touch the color wheel or slider bar on the remote (if the remote does not have color wheel or slider bar, click or touch any keys), the connected led light on receiver flickers twice, which means well paired.
   Note: one receiver can be paired with max 8 remote controls.

Delete the pairing:

1. Wire up the RF receiver correctly, power on.
2. Hold down the “ Learning Key” button on receiver for over 3 seconds until the connected led light on receiver flickers twice, which means well deleted.

Setting minimum brightness:
Adjust brightness to a level you would like, then click the “Min.Set ” key, once set a minimum brightness, the light can only be dimmable between this minimum brightness and maximum brightness.
Delete the minimum brightness:
Adjust the brightness to maximum level, then hold the “Min.Set” key for 3s to delete the minimum brightness.

Wiring diagram

1. With triac dimmable driver
2. With dimmable LED driver
3. With DC push switch

If you use multiple receivers, you have two choices:
Option 1: have all the receivers in the same zone, like zone 1 Option 2: have each receiver in a different zone, like zone 1, 2, 3 or 4

S21008

Documents / Resources

| SLC S21008 Controller AC RF 1,5A 230V BuiltInDimmer [pdf] Instruction Manual
S21008 Controller AC RF 1 5A 230V BuiltInDimmer, S21008, S21008 Controller, S21008 Controller AC RF 1A 230V BuiltInDimmer, 1A 230V BuiltInDimmer, S21008 Controller AC RF 5A 230V BuiltInDimmer, 5A 230V BuiltInDimmer, 1A 230V BuiltInDimmer, BuiltInDimmer
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>