Miroir M189 HD Portable Projectors Instruction Guide
- June 3, 2024
- Miroir
Table of Contents
Miroir M189 HD Portable Projector
TRADEMARK
2019 Miroir USA, LLC. All rights reserved. Miroir, the Miroir Logo, SYNQ and the SYNQ Logo are owned by Miroir USA, LLC. All other trademarks are the property of their respective owners. Miroir USA, LLC assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.
YOUR MIROIR HD PRO PROJECTOR
- Projection Lens
- Cooling Vent – IMPORTANT: Do not cover or block airflow to the vent.
- Focus Controls – Turn wheel to adjust focus.
- Kick Stand – Kick Stand out to elevate front.
- Tripod Mount – Will fit a standard sized tripod screw. Tripod not included.
- Rubber Foot Pads – Provides stability and proper airflow to cooling vents.
- Battery Indicator Lights – Lights flash in turn as the device charges. The battery is fully charged when all the lights illuminate and no longer flash.
- Volume Controls – Increase/decrease the volume output of the projector.
- Power Button – Press and hold for 3 seconds to power the projector on or off. Briefly press to check battery life on the projector. Battery life will be displayed by the number of lit battery indicator lights.
- Power Port – Connect included AC Adapter/Charger for power. Fully charge battery before the first use (approx. 4-5 hours)
- Reset Button – Press to reset projector.
- Audio Out (3.5mm) – (Optional) Connect an external speaker or headphones.
- HDMI Video Input – Connect an HDMI cable to a device that supports HDMI video output.
- USB Power Output – Connect a USB power cable to provide power to a HDMI streaming stick. Cannot be used for video input
CONNECT TO YOUR LAPTOP HDMI
CONNECT TO YOUR DEVICE
CONNECT TO YOUR MACBOOK USB-C
CONNECT TO YOUR APPLE DEVICE LIGHTNING
CONNECT TO YOUR STREAMING STICK
TROUBLESHOOTING
No sound
- Check the volume control on your source device to ensure the volume is turned up.
- Check the volume control on the projector to ensure the volume is turned up.
- If you are using an adapter, verify that the adapter supports audio.
- Check that the HDMI cable is fully plugged into the HDMI port.
The image is not square
- Check that the projector’s lens is parallel to your projection surface and that your projection surface is flat.
The image is blurry
- Adjust the projected image’s focus by rolling the focus wheel forwards or backwards.
- Check that the surface you are projecting on is smooth and non-reflective.
- Check that the projector’s lens is clean and free of debris.
No Signal Message
- Check that you are using the required cable and/or adapter.
- If you are using a digital AV adapter, check that the adapter is an authentic Apple adapter and is compatible with your model phone or tablet.
- If you are connected to a laptop or computer, check your computer display settings to ensure a multiple display option is selected (such as “duplicate these displays”).
- Check that your source device supports HDMI video out.
Projector will not power on, or stay powered on
- Check the battery life of the projector by briefly pressing the power button on the projector. If one or fewer lights illuminate, charge the battery with the AC adapter.
LEARN MORE
To learn more about your Miroir HD Pro Projector and its operations, to review specs, and find answers to frequently asked questions, please visit: www.miroirusa.com/M189
FAQs
What happens if you leave a Miroir M189 projector on for too long?****
Burn-ins are frequently brought on by projectors that have been kept on for too long, which frequently results in overheating and component destruction. Burn-in is likely to blame if you start to observe dark spots that look like there aren’t enough pixels on the screen.
Can you leave a Miroir M189 projector on overnight?****
To prevent overheating, it would be beneficial to keep your projector in a cool space with adequate ventilation. In other words, the bulb will survive its full life as long as it is properly maintained, even if you leave your projector on for an extended period of time.
What is the best resolution for a Miroir M189 portable projector?****
In light of this, home users should think about the resolutions 1080p and 4k UHD.
How many hours do Miroir M189 projectors last?****
Although some bulbs can last up to 5,000 hours, most projector lamps endure between 1,500 and 2,000 hours. The majority of projectors will require one to two bulb changes at this time. The high-pressure mercury and xenon used in projector lamps cause bulbs to dim over time, unlike ordinary bulbs that go out once they are depleted.
How long do Miroir M189 portable projectors last?****
A portable projector’s lamp life can range from 10,000 to 30,000 hours, depending on the type of light utilized.
Why do we need Miroir M189 portable projector?****
Therefore, choosing a portable projector makes sense. It is very simple to transport from one location to another. If you need to give a presentation and don’t have the time to move the projector from one location to another, this is helpful.
How much space do you need for a Miroir M189 projector?****
To cast a huge image, traditional projectors require a lot of area. Typically, you need at least 100 inches between the projector and screen in order to cast a 100-inch image. A projector with a short-throw lens, which enables it to cast a larger picture from a closer distance, may be necessary for a tiny room.
How do I protect my Miroir M189 projector?****
Keep all small objects away from your projector. Projectors need ventilation to prevent overheating. Place a projector in a box with adequate airflow, not one that blocks cooling fans. Extreme temperatures – Exposure to the elements, whether it be too hot or too cold, can harm your projector.
Can you use a Miroir M189 projector everyday?****
A projector can be used to watch regular, daily television. It won’t harm the projector (though it might shorten the bulb life), and it’s less expensive than most larger televisions, which could make viewing TV more enjoyable all around.
Do Miroir M189 portable projectors need to be plugged in?****
Many portable projectors come equipped with built-in batteries that can operate for two to three hours without the need for an electrical outlet. Some of them can run without a plug by connecting to external USB battery packs.
Do Miroir M189 projectors need maintenance?****
Little maintenance is required for your projector to continue operating at its peak level. To avoid the projector overheating because of obstructed airflow, you might need to clean the lens from time to time in addition to the air filter and air vents.
How long should a Miroir M189 projector charge?****
Before their initial usage, all new projectors need to be charged for three to five hours. Always charge the projector before it turns off on its own. Keep in mind that the projector will turn off on its own when the battery level hits 15%. Always turn off the power before charging.
Do Miroir M189 portable projectors have speakers?****
Consequently, quality portable projectors include internal speakers that sound good even outside.
How do you charge a Miroir M189 portable projector?****
Connect the projector’s power cord (included) to the AC adapter (19.5 V) (supplied). Connect the projector’s DC IN 19.5V jack to the AC adapter. Put the power cord’s plug firmly into the wall outlet. The charge indicator (a) illuminates in amber when charging begins.
What is the brightest Miroir M189 portable projector?****
The Miroir projector is the most potent projector in a few key respects, including having the greatest resolution, brightest bulb, and a variety of connections (two HDMI, USB-A, USB-C, Coaxial, and Ethernet).
How does a portable Miroir M189 LED projector work?****
An LED projector employs a combination of red, green, and blue LED bulbs to create a white light that is then filtered through the lens to make an image on the screen, as opposed to a normal lamp-based projector, which generates color via color filters or color wheels.
How long do Miroir M189 portable projectors last?****
A portable projector’s lamp life can range from 10,000 to 30,000 hours, depending on the type of light utilised.
Do Miroir M189 portable projectors need to be plugged in?****
Many portable projectors come equipped with built-in batteries that can operate for two to three hours without the need for an electrical outlet. Some of them can run without a plug by connecting to external USB battery packs.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>