Miroir L300 Ultra Pro Smart Projector Instructions Manual
- June 3, 2024
- Miroir
Table of Contents
Miroir L300 Ultra Pro Smart Projector
Specifications
- Brand: Miroir
- Special Feature: Speakers
- Connectivity Technology: HDMI
- Display resolution: 1920x1080p
- Display Resolution Maximum: 1920×1080 Pixels
What’s in the box?
- L300 Projector
- Remote Control
- HDMI Cable
- AC Adapter
- Quick Start Guide
Product Overview and Powering on/off
- TOSLINK interface
- USB 2.0 interface
- USB 2.0 interface
- HDMI interface
- LAN interface
- Power-in socket
- on/Off Button
Bluetooth speaker mode
- To enable Bluetooth speaker mode, press the power button on the remote control.
Bluetooth speaker controls on remote control
- Volume +/- button: Adjusts the volume.
- Speaker button: Returns to projector mode.
- The other buttons on the remote control have no function.
- Important After enabling Bluetooth speaker mode, keep the connected Bluetooth device within 8 m of the projector and ensure that there are no obstructions.
Getting Started
- Place the product in a suitable location with the lens pointing at the projection surface.
- Connect the power adapter to the mains. Press the power button on the main unit or remote control to turn on the projector. The indicator will turn on and the system will load.
- Follow the startup wizard or go to “System settings—Networks” and connect to your wireless network.
Remote Control
- Indicator
- Power Off – Turn on and off
- Projector settings – View the projector settings
- Direction buttons – Move the focal point up/down/left/right. During video playback, hold down the left/right direction buttons to rewind/fast-forward the video
- Play/pause/confirm button – Confirm focal point; on the video playback interface, short press to play/pause the video.
- Return button – Return to previous interface
- Home screen button – Return to home screen
- Menu/air mouse button – Short press: Display menu, Long press: Air mouse
- Volume +/- button – Adjust the volume
Pairing the Remote Control
If the remote control disconnects from the projector, bring the remote control to within 6 feet of the projector and press the “Confirm” and “Return” buttons simultaneously until the indicator starts to flash, indicating that the remote control is connected to the projector.
FCC Statement
2020 Miroir USA, LLC. All rights reserved. Miroir and the Miroir logo are owned by Miroir USA, LLC. All other trademarks are the property of their respective owners. Miroir USA, LLC assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice www.miroirusa.com
FAQ’s
How many watts does it use??
I would assume 30 to 50 watts; it takes a 12 volt wall wart and probably needs 2 or 3 amps. Merely estimation.
How large a screen does this projector have when placed 9′ away?
It is small in size and has a 1.3:1 throw ratio lens. Please note that we do not recommend a picture over 80″ diagonal for this projector, which translates to an image that is 83″ wide, 46.7″ high, and 95″ on the diagonal for a 9 foot distance from the projector to the screen. When an image is too large, it gets dark and is difficult to view. For this projector, a distance of more than 7.5′ is not advised.
This projector can it be recharged?
No, the L300 projector does not contain a battery, and as a result, it can only be used with AC power.
The true ansi lumen is how many lumens.
Up to 300 lumens of light output are capable of being generated by the L300 LCD projector.
Can a Roku device be connected to the projector?
Yes, you may connect the Roku to the HDMI port and power it using the projector’s USB-A connector.
Is there a ceiling mount on this?
There is a typical tripod screw mount on it. Amazon sells several ceiling mounts for projectors with tripod mounts.
The trapeze can be adjusted, but how?
Yes, if you’re talking about Keystone. +15% of a degree.
How do I go to the menu?
The remote merely modifies input; there is no menu.
I am unable to establish a Bluetooth connection with my Samsung soundbar. The manual doesn’t contain many instructions on how to do it. Any help?
To add an accessory to the L300 projector, click to Settings>Add Accessory (with the Bluetooth Logo). when Scan for devices is highlighted, select by clicking (center button inside ring on the remote). As instructed by the manufacturer, switch on your Bluetooth speaker’s discovery mode. Using the up and down arrows on the L300 remote, choose the speaker when it appears on the list of compatible devices.
Although a 120-inch screen is recommended for this gadget, the item’s specifications call for a 150-inch projection size. Those with the best
The ultimate projection size is determined by the light output of the projector and the gain (or reflectivity) of the screen upon which the image is projected. In general, the projector’s light spreads out more as the image gets larger, giving the impression that it is darker.
Does this projector allow for the HDMI playing of HDCP-protected media?
Yes, but it requires a little magic. To get my MAC and computer to play iTunes movies, I had to turn them both on and off while they were both connected. But ever since the initial attempt, everything has gone off without a hitch! I would advise purchasing a compact tripod for it. Without that, it might be challenging to get the picture straight. however, a distinct picture
Which power bank works with this particular model?
A power bank with an output matching that of the Miroir L300 adaptor must be used. Miroir can’t test every power bank because there are too many of them. The ideal approach is to input your adaptor’s settings into an online calculator, like the one from supercircuits.com, and then look for a power bank that complies with those requirements. To check if a power bank is compatible with your adapter, enter any two of its specifications.
Will a Macbook Pro 2018 be compatible with this?
Yes, you can use a USB-C to USB-C video connection to connect the MacBook 2018’s USB-C Thunderbolt port to the Miroir L300 projector’s USB-C input. You can also use a genuine Apple USB-C Digital AV Multiport Adapter to link the MacBook to the HDMI port on the Miroir L300 projector.