miroir L300 Full HD Pro Projector User Guide
- June 5, 2024
- Miroir
Table of Contents
miroir L300 Full HD Pro Projector
Your Miroir Full HD Pro Projector
-
Battery Indicator Lights – Lights flash in turn as the device charges.
The battery is fully charged when all the lights illuminate and no longer flash. -
Lens Cover – Slide open to turn power on/o!
-
Audio Out (3.5mm) – (Optional) Connect an external speaker or headphones.
-
HDMI Video Input – Connect an HDMI cable to a device that supports HDMI video output.
-
USB Power Output – Connect a USB power cable to provide power to an HDMI streaming stick or to charge a smartphone battery. Cannot be
used for video input. -
USB-C Video/Charge Input – Connect any compatible USB-C charge/ video cable to a device that supports USB-C video output or a power
adapter that supports charging. (USB-C cable not included) -
Reset Button – Press to reset the projector.
-
Power Port – Connect included AC Adapter/Charger for power. Fully charge the battery before the first use (approx. 4-5 hours).
-
Mode Button – Long press the mode button to change from ECO to Normal Mode. Normal mode is maximum brightness but shorter battery life.
-
Controls – Increase/decrease the volume output of the projector.
-
Focus Controls – Turn the wheel to adjust focus. Rubber Foot Pads – Provides stability and proper airflow to cooling vents.
-
Cooling Vent – IMPORTANT: Do not cover or block airflow to the vent.
Connect To Your Apple
Connect To Your MacBook USB-C
Connect To Your Device
Connect To Your Laptop HDMI
Connect To Your Streaming Stick HDMI
IMPORTANT! Not all USB – C cables will support video.
Multi-media Play Supported Format
- Video: mp4,avi,mov,wmv,mkv,rm,rmvb,mpg,mpeg
- 1080P@30fps, 720P@60fps
- Image: JPG 15360 x 8640 Up to 1024×768 for progressive format
- PNG, 9600 x 6400 (Up to 1200×800 for interlace format)
Connect to the Network
Before upgrading or connecting to an Apple device via a Wi-Fi network, you need to connect the projector to the network first.
- Steps 1: Turn on the projector and enter the wireless page, you will see the device name and password in the upper left corner.
- Steps 2: Set the Wi-Fi of your mobile device to connect to the projector
- Step 3: Open the web browser of your device and log on to the URL 192.168.491 Set the projector to connect to the network. there will be a router icon in the upper right corner if connected to the network successfully
OTA upgrading
Check the new URL 192168.xxx.xx in the projected screen, log on in your mobile
device, then you can see the ‘upgrade” button and do the OTA upgrading.
Wireless Connection to Android Devices
To connect your Android device to the projector by Smart view/Miracast
- Steps t: Turn on the projector and enter the wireless page.
- Step 2: Open the quick menu of the Android device, and active Smart view/Miracast.
- Steps 3: The Projector named PRO-xo0ox, find and connect.
- Note: You may need to check with your android device manufacturer to verify that your Android device supports video out.(in Samsung devices, this function is named Smart view
Wireless Connection to Apple Devices
To connect your Apple device to the projector by Screen mirroring/Airplay.
- Steps t: Tum on the projector and enter the wireless page. you will see the device name and password in the upper left corner.
- Steps 2: Set the Wi-Fi of your Apple device to connect to the projector
- Step 3: Open the quick menu of the Apple device to activate the screen mirroring, to look for the projector, and connect it.
- Note: If the projector and Apple device are connected to the same network screen mirroring can also work. Some Streaming apps don’t allow video output Such as Netflix.
Troubleshooting
The image is blurry
Adjust the projected image’s focus by rolling the focus wheel forwards or
backward.
Check that the surface you are projecting on is smooth and non-reflective.
Check that the projector’s lens is clean and free of debris.
The image is not square
Check that the projector’s lens is parallel to your projection surface and
that your projection surface is flat
No sound
Check the volume control on your source device to ensure the volume is turned
up.
Check the volume control on the projector to ensure the volume is turned up.
If you are using an adapter, verify that the adapter supports audio.
Check that the HDMI cable is fully plugged into the HDMI port
No Signal Message
Check that you are using the required cable and/or adapter.
if you are using a digital AV adapter, check that the adapter is an authentic
Apple adapter and is compatible with your model phone
or tablet. if you are connecting via USB-C, check that you are using a USB-C
cable that is labeled uSB-C Video”. Some USB-C cables do not support video. if
you are connected to a laptop ar computer, check your computer display
settings to ensure a multiple display option is selected (such as “mirror
these displays”). Check that your source device supports HDMI video out or
USB-C video ou
The projector will not power on, or stay powered on
Check the battery life of the projector by briefly pressing the power button
on the projector. if one or fewer lights illuminate, charge the battery with
the USB-C cable or power adapter.
2022 Miroir USA, LLC. All rights reserved. Miroir and the Miroir logo are owned by Miroir USA, LLC. All other trademarks are the property of their respective owners. Miroir USA, LLC assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>