miroir L500S Full HD 1080p Projector User Manual
- June 4, 2024
- Miroir
Table of Contents
miroir L500S Full HD 1080p Projector
Your Miroir L500S Full HD 1080p Projector
- A Audio Out (3.5mm) – (Optional) Connect an external speaker or headphones.
- B USB Power and Media Reader Jack – Connect a USB Power cable to provide power to an HDMI streaming stick. Plug a USB stick into the port and play movies, or share pictures.
- C HDMI Video Input – Connect an HDMI cable to a device that supports HDMI video output.
- D Power Port – Connect included AC Adapter for power. DC In – 19VDC@3.7A
- E Volume Up and Down – Increase/decrease the volume output of the projector.
- F HDMI Control – Switch between HDMI-1 and HDMI-2.
- G Power Button – Turn the projector on/off
- H Focus Controls – Turn wheels to adjust focus and keystone.
- I Cooling Vent – IMPORTANT: Do not cover or block airflow to the vent.
- J Rubber Foot Pads – Provides stability and proper airflow to cooling vents.
Remote Control
- A Power
- B Return
- C Setting
- D Volume
- E Search
- F Direction
- G Confirm
- H Home
- I Menu
- J Page Up/Down
- K Mute
Connecting Your Projector with a Cable
Connect To Your Laptop HDMI
Connect To Your Device
Connect To Your MacBook USB-C
Connect To Your Apple Device Lightning
Connect To Your Streaming Stick HDMI
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- The equipment complies with the FCC Radiation exposure limit set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>