CP PLUS ezykam+ E27A Wi-Fi PT Camera User Guide

CP PLUS ezykam+ E27A Wi-Fi PT Camera User Guide

28A ezykam+ WiFi Cameras WiFi and Wireless Security

Thank you for choosing CP PLUS ezykam+. Get started using your new devices by downloading ezykam+ app, one convenient app that manages everything straight from your smart phone. Easily connect to your home Wi-Fi and control multiple devices from the touch of your tips

What’s in the Box

Get Ready

• * Know yourWi-Fi network and password.

  • Make sure your mobile device is unning iOs® 9.0 or higher or Android™ 5.0 or higher.

• Make sure you’re connecting to.a 2.4GHz Wi-Fi network (It can’t connect to SGHz networks)

1. 1. Download the ezykam+ app from App Store or Google Play.  

   

2. Register an account on your ezykam+ app.
   **STEP 1

• Select the counry.
• Enterthe email address.
STEP 2.
**
• Enter the verification code andcreate a password

1. 1.  **Plug in**  

   How do reset my camera?
   • Use the reset pin o press the Reset Button for several seconds until the camera tarts to beep.
   •  Optional: Insert Micro 5D card
   

2. Add Camera
   • Open ezykam+ app, dlick “+” on the topright corner of the”HOME” page, then select “Specific model to add”.

• Make sure that the Red LED indicator i blinking and voice prompt is audible.• Enter your “Wi-Fi network and password”, click “CONFIRM”.
4.0 AddCamera

• Read the instruction about “Scan the camera QR code” and click “Continue’.
• Scan the QR Code on your phone with camera. Heard voice prompt, click “Heard the beep”.

http://uqr.me/joewaters/qr/QRC4Df0205
4.1 AddCamera
• Whenthe indicatorlight on the device turn to steady blue light, the network configuration is complete.
• Please refer to the specific AP interface if there are any difference.

Frequently Asked Questions

1. Can I share the camera with family and friends?

Yes, you can share your cameras with family and friends who will have access to view the camera.

2. What’s the Wireless Range?

The range of your home Wi-Fi is heavily dependent on your home router and the conditions of the room. Check with your router specifications for exact range data.

3. The camera appears offline or unreachable?

Make sure you enter the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problem. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.

4. Cannot connect to your Wi-Fi network.

Make sure you enter the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems. If the Wi-Fi the signal is too weak, reset your Wi-Fi router and try again.

5. How many cameras can I control?

CP Plus app can control an unlimited number of cameras in an unlimited amount of locations. Your router may have a limit on how many cameras can be connected to one router.

Works with Alexa and Google Assistant

• Now Stream your camera video using Alexa and Google Assistant.

System Requirements

• Smartphone running iOS® 9.0 or higher or Android™ 8.0 or higher
• Existing Wi-Fi Network with internet connection

Technical Specifications

• Camera: up to 2MP (1920×1080) at 20frames / sec. H.264 encoding
• Field of view: 81.8°(D), 70°(H), 39°(V)
• Audio: Internal Speaker and Microphone
• Storage: supports up to 256GB Micro SD card (not included)
• • • Wi-Fi: IEEE 802.11 b/g/n, 2.4GHz (not compatible with 5GHz Wi-Fi networks)

Thank you for choosing CPPIus ezykam+. For further assistance, you can reach us via ezycare@cpplusworld.com Please read the instruction carefully before using the product

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>