miroir M280A Smart Mini Pro Projector User Guide
- June 5, 2024
- Miroir
Table of Contents
miroir M280A Smart Mini Pro Projector
Your Miroir Projector
Package contents and product specifications
Remote Control
- Indicator
- Speaker button
- Switch between projector/ speaker mode
- Projector settings
- View the projector settings
- Direction buttons
- Move the focal point up/ down/left/right. During video playback, hold down the left/right direction buttons to rewind/fast forward the video
- Play/pause/confirm button
- Confirm focal point; on the video playback interface, short press to play/pause the video.
- Return button
- Return to the previous interface
- Home screen button
- Return to the home screen
- Menu/air mouse button
- Short press: Display menu,
- Long press: Air mouse
- Volume +/- button
- Adjust the volume
Pairing the Remote Control
If the remote control disconnects from the projector, bring the remote control to within 0.5 m of the projector and press the “Confirm” and “Return” buttons simultaneously until the indicator starts to flash, indicating that the remote control is connected to the projector.
Product Overview and Powering on/of
- System indicator – Switched on: Constant white
- Charging indicator – Charging: Red Charging complete: Green
- Power-in socket
- USB 2.0 interface
- Reset button – Performs a force restart
- HDMI interface
- 3.5 mm headphone socket
- On/off button
- Dust cover for the lens – After connecting the power supply, slide the dust cover to reveal the lens.
-
Performing a force restart
If the system crashes or becomes unresponsive, insert a pointed object into the Reset button and wait for the white indicator to turn off, indicating that the projector has switched off. Then hold down the power button to restart the projector. -
Bluetooth speaker mode
- To enable Bluetooth speaker mode, press the speaker button on the remote control.
- You can also enable Bluetooth speaker mode by sliding the lens dust cover.
-
Bluetooth speaker controls on the remote control:
Volume +/- button: Adjusts the volume. Speaker button: Returns to projector mode. The other buttons on the remote control have no function. Important After enabling Bluetooth speaker mode, keep the connected Bluetooth device within 10 m of the projector.
Built-in Lithium-ion Battery
- If you do not plan to use the product for an extended period, charge the battery at least once every 3 months to prevent the battery from discharging. When storing the product for period of longer than one year, we recommend charging once per year to discharge and reactivate the battery.
- After use, disconnect the power supply to avoid damaging the battery due to excessive charging.
- Use the product at temperatures of 0 to 40°C with a relative humidity of 20-70% and keep it away from hot and humid environments and sources of heat.
- Store the product in a dry place away from moisture and corrosive materials.
- Do not use chemical cleaning products (e.g. soap or detergent) to clean the product.
- Do not disassemble the product, subject it to impacts or falls, or place it in open flames or water.
- If the battery inside the product expands, leaks, or emits an odor, discontinue use immediately.
- Do not use the product in strong electrostatic or electromagnetic environments, as this may damage the battery’s safety mechanism and present a safety hazard.
- Do not use or store the product at high temperatures (e.g. in direct sunlight or in a hot vehicle), as this may cause the battery to overheat, catch fire or malfunction and reduce the battery’s lifespan.
Getting Started
- Place the product in a suitable location with the lens pointing at the projection surface.
- Hold down the power button to turn on the projector. The white indicator will turn on and the system will load.
- Follow the startup wizard or go to “System settings— Networks” and connect to your wireless network.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>