miroir M600 Full HD Pro Projector User Guide

Table of Contents

miroir M600 Full HD Pro Projector
product

miroir M600 Full HD Pro Projector fig 1

Battery Indicator Lights – Lights flash in turn as the device charges. The battery is fully charged when all the lights illuminate and no longer flash.
Lens Cover – Slide open to turn power on/off
Audio Out (3.5mm) – (Optional) Connect an external speaker or
headphones.
HDMI Video Input – Connect an HDMI cable to a device that supports
HDMI video output.USB Power Output
– Connect a USB power cable to provide power to a HDMI streaming stick or to charge a smartphone battery. Cannot be used for video input.
USB-C Video/Charge Input – Connect any compatible USB-C charge video cable to a device that supports USB-C video output, or power adapter that supports charging. (USB-C cable not included)
Reset Button – Press to reset projector.
Power Port – Connect included AC Adapter/Charger for power. Fully
charge battery before the first use (approx. 4-5 hours).
Mode Button – Long press mode button to change from ECO to Normal
Mode. Normal mode is maximum brightness but shorter battery life.
Controls – Increase/decrease the volume output of the projector.
Focus Controls – Turn wheel to adjust focus.
Rubber Foot Pads – Provides stability and proper airflow to cooling vents.
Tripod Mount – Will fit a standard sized tripod screw. Tripod not included.
Cooling Vent – IMPORTANT: Do not cover or block airflow to the vent.

The image is blurry

Adjust the projected image’s focus by rolling the focus wheel forwards or backwards.
Check that the surface you are projecting on is smooth and non-reflective.
Check that the projector’s lens is clean and free of debris.

The image is not square

Check that the projector’s lens is parallel to your projection surface and that your projection surface is flat.

No sound

Check the volume control on your source device to ensure the volume is turned up.
Check the volume control on the projector to ensure the volume is turned up.
If you are using an adapter, verify that the adapter supports audio.
Check that the HDMI cable is fully plugged into the HDMI port.

No Signal Message

Check that you are using the required cable and/or adapter.
If you are using a digital AV adapter, check that the adapter is an authentic Apple adapter and is compatible with your model phone or tablet.
If you are connecting via USB-C, check that you are using a USB-C cable that is labeled “USB-C Video”. Some USB-C cables do not support video.
If you are connected to a laptop or computer, check your computer display settings to ensure a multiple display option is selected (such as “mirror these displays”).
Check that your source device supports HDMI video out or USB-C video out.

The projector will not power on, or stay powered on

Check the battery life of the projector by briefly pressing the power button on the projector. If one or fewer lights illuminate, charge the battery with the USB-C cable or power adapter.