BIOSTAR B650EGTQ Motherboard User Manual

June 9, 2024
BIOSTAR

B650EGTQ Motherboard

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand. Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and we will not be
responsible for any mistakes found in this user’s manual. All the brand and product names are trademarks of their respective companies.

Dichiarazione di conformità sintetica Ai sensi dell’art. 2 comma 3 del D.M. 275 del
30/10/2002 Si dichiara che questo prodotto è conforme alle normative vigenti e soddisfa i requisiti essenziali richiesti dalle direttive 2004/108/CE, 2006/95/CE e 1999/05/CE
quando ad esso applicabili

Short Declaration of conformity We declare this product is complying with the laws in force and meeting all the essential requirements as specified by the directives 2004/108/CE, 2006/95/CE and 1999/05/CE
whenever these laws may be applied

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Table Of Contents
FCC Information and Copyright 1 Chapter 1: Introduction 3
1.1 Before You Start …………………………………………………………………………………………………… 3 1.2 Package Checklist…………………………………………………………………………………………………. 3 1.3 Specifications………………………………………………………………………………………………………. 4 1.4 Rear Panel Connectors………………………………………………………………………………………….. 6 1.5 Motherboard Layout ……………………………………………………………………………………………. 7 Chapter 2: Hardware installation 8 2.1 Install Central Processing Unit (CPU) ………………………………………………………………………. 8 2.2 Install a Heatsink………………………………………………………………………………………………….. 9 2.3 Connect Cooling Fans …………………………………………………………………………………………. 11 2.4 Install System Memory ……………………………………………………………………………………….. 12 2.5 Expansion Slots ………………………………………………………………………………………………….. 14 2.6 Jumper & Switch Setting……………………………………………………………………………………… 16 2.7 Headers & Connectors………………………………………………………………………………………… 17 2.8 LEDs …………………………………………………………………………………………………………………. 22 Chapter 3: UEFI BIOS & Software 23 3.1 UEFI BIOS Setup …………………………………………………………………………………………………. 23 3.2 BIOS Update………………………………………………………………………………………………………. 23 3.3 Motherboard BIOS Update ………………………………………………………………………………….. 23 3.4 Software……………………………………………………………………………………………………………. 28 Chapter 4: Useful help 38 4.1 Driver Installation ………………………………………………………………………………………………. 38 4.2 AMI BIOS Beep Code…………………………………………………………………………………………… 39 4.3 AMI BIOS post code ……………………………………………………………………………………………. 39 4.4 Troubleshooting…………………………………………………………………………………………………. 41 4.5 RAID Functions…………………………………………………………………………………………………… 42 APPENDIX I: Specifications in Other Languages 44 Arabic…………………………………………………………………………………………………………………….. 44 German………………………………………………………………………………………………………………….. 46 Spanish ………………………………………………………………………………………………………………….. 48 Thai ……………………………………………………………………………………………………………………….. 50 Japan……………………………………………………………………………………………………………………… 52
2 | Table Of Contents

Chapter 1: Introduction

B650EGTQ

11 Before You Start
Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below:
· Prepare a dry and stable working environment with sufficient lighting. · Always disconnect the computer from power outlet before operation. · Before you take the motherboard out from anti-static bag, ground yourself properly
by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge. · Avoid touching the components on motherboard or the rear side of the board unless necessary. Hold the board on the edge, do not try to bend or flex the board. · Do not leave any unfastened small parts inside the case after installation. Loose parts will cause short circuits which may damage the equipment. · Keep the computer from dangerous area, such as heat source, humid air and water. · The operating temperatures of the computer should be 0 to 45 degrees Celsius. · To avoid injury, be careful of: Sharp pins on headers and connectors Rough edges and sharp corners on the chassis Damage to wires that could cause a short circuit
12 Package Checklist
· Serial ATA Cable x4 · Quick Installation Guide x1 · Fully Setup Driver DVD x1
Note
»» Thepackagecontentsmaybedifferentduetothesalesregionormodelsinwhichitwassold.For moreinformationaboutthestandardpackageinyourregion,pleasecontactyourdealerorsales representative.

Chapter 1: Introduction | 3

13 Specifications

Specifications

CPU Support

Socket AM5 support AMD® RyzenTM 7000 series Processors
Support for future AMD Ryzen processors with BIOS update * Please refer to www.biostar.com.tw for CPU support list.

Chipset

AMD B650E

Memory
Storage
LAN Audio Codec USB Expansion Slots
Rear I/Os

AMD Ryzen 7000 series Processors: Supports Dual Channel DDR5 4800/ 5200/ 5400(OC)/ 5600(OC)/ 6000+(OC)
4 x DDR5 DIMM Memory Slot, Max. Supports up to 128 GB Memory
Each DIMM supports non-ECC 8/ 16/ 32 GB DDR5 module

  • Please refer to www.biostar.com.tw for Memory support list.
    4x SATA III Connector (6Gb/s) : Supports AHCI & RAID 0, 1, 10 Total support 3 x M.2 Socket and 4 x SATA (6Gb/s) ports 1x M.2 (Key M) Socket (M2M_CPU_1) :
    Supports M.2 Type 2242/ 2260/ 2280 SSD module Supports PCI-E 5.0 x4 (128Gb/s)/ 4.0 x4 (64Gb/s) – NVMe/ AHCI SSD 1x M.2 (Key M) Socket (M2M_CPU_2) :
    Support M.2 Type 2280 SSD module Support PCI-E 5.0 x 4 (128Gb/s) / 4.0 x 4 (64Gb/s) – NVMe / AHCI SSD 1x M.2 (Key M) Socket (M2M_SB) :
    Support M.2 Type 2280 SSD module Support PCI-E 4.0 x 4 (64Gb/s) – NVMe / AHCI SSD Realtek RTL8125B 10/ 100/ 1000/ 2500 Mb/s auto negotiation, Half / Full duplex capability ALC1220 7.1 Channels, High Definition Audio, Hi-Fi 1x USB 3.2 Gen2x2 Type-C port (1 on rear I/Os) 5x USB 3.2 Gen2 port (3 on rear I/Os and 2 via internal headers) 2x USB 3.2 Gen1 port (2 on rear I/Os) 6x USB 2.0 port (2 on rear I/Os and 4 via internal headers) 1x PCIe 5.0 x 16 Slot (x16 or x8 mode) 1x PCIe 4.0 x 4 Slot (x4 mode) 1x PCIe 3.0 x 1 Slot (x1 mode)
    2x WiFi Antenna Port
    1x PS/2 Keyboard/ Mouse Port 1x BIOS update Button 1x HDMI Port (HDMI1.4) 1x DP Port (DP1.2) 1x USB 3.2 (Gen2x2) Type-C Port 3x USB 3.2 (Gen2) Type-A Port 2x USB 3.2 (Gen1) Type-A Port 2x USB 2.0 Type-A Port 1x 2.5G LAN port
    3x Audio Jack

»» ContinuedonNextPage

4 | Chapter 1: Introduction

B650EGTQ

Specifications
Internal I/Os
Form Factor OS Support

4x SATA III Connector (6Gb/s) 1x M.2 (E Key) Socket : Supports 2230 type Wi-Fi & Bluetooth module 2x USB 2.0 Header (each header supports 2 USB 2.0 ports) 1x USB 3.2 (Gen2) Header (each header supports 2 USB 3.2 (Gen2) ports)
1x 4-Pin Power Connector
1x 8-Pin Power Connector
1x 24-Pin Power Connector 1x CPU Fan Connector 1x CPU water cooling connector (CPU_OPT)
3x System Fan Connector
1x Front Panel Header
1x Front Audio Header
1x Internal Stereo Speaker Header
2x Clear CMOS Header
1x COM Port Header
1x TPM Header 2x LED Header (5V) 1x LED Header (12V) 1x IO LED Header 1x SB LED Header * M.2 (E key) Wi-Fi card is not provided
u-ATX Form Factor, 244 mm x 244 mm Windows 10(64bit) / Windows 11(64bit) Biostar reserves the right to add or remove support for any OS with or without notice.

Chapter 1: Introduction | 5

14 Rear Panel Connectors
Note »» Maximumresolution
HDMI:4096×2160@30Hz,compliantwithHDMI1.4. DP:4096×2160@60Hz,compliantwithDP1.2 »» WhenusingthefrontHDaudiojackandplugintheheadset,therearsoundwillbeautomatically Disabled. »» TheWiFiantennaportallowsyoutoconnecttotheEKEYmoduleandusetheWiFi&Bluetooth function.
6 | Chapter 1: Introduction

15 Motherboard Layout

B650EGTQ

Note »» representsthe1stpin.

Chapter 1: Introduction | 7

Chapter 2: Hardware installation
21 Install Central Processing Unit (CPU)
Step 1: Locate the CPU socket on the motherboard Step 2: Open Lever and then load plate using finger tab.
Step 3: Align and seat processor package on socket.
8 | Chapter 2: Hardware installation

Step 4: Rotate lever and press lever finger, then locked the position.

B650EGTQ

Note »» EnsurethatyouinstallthecorrectCPUdesignedforAM5socket.
22 Install a Heatsink
Step 1: Place the heatsink and fan assembly onto the retention frame. Match the heatsink clip with the socket mounting-lug. Hook the spring clip to the mounting-lug.
Step 2: On the other side, push the retention clip straight down to lock into the plastic lug on the retention frame, and then press down the locker until it stops.

Chapter 2: Hardware installation | 9

Step 1: Remove the heatsink and fan assembly bracket on the motherboard and keep the cooler backplane under the motherboard. Step 2: Place the heatsink and fan assembly on top of the installed CPU and make sure that the fan cable is closest to the CPU fan connector. Please refer diagram to the following screw into the screw hole in the order shown. Note »» DonotforgettoconnecttheCPUfanconnector. »» Forproperinstallation,pleasekindlyrefertotheinstallationmanualofyourCPUheatsink. 10 | Chapter 2: Hardware installation

B650EGTQ
23 Connect Cooling Fans
These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. CPU_FAN1/ CPU_OPT: CPU Fan Header

PWM Mode

DC Mode

Pin Assignment

Pin Assignment

1 Ground 2 +12V

1 Ground 2 Voltage Control

3 Sense

3 Sense

4 Speed Control Signal 4 NC

SYS_FAN1/ SYS_FAN2/ SYS_FAN3: System Fan Header

PWM Mode

DC Mode

Pin Assignment

Pin Assignment

1 Ground 2 +12V

1 Ground 2 Voltage Control

3 Sense

3 Sense

4 Speed Control Signal 4 NC

Note
»» CPU_FAN1,CPU_OPT,SYS_FAN1/2/3support4-pinand3-pinheadconnectors.Whenconnecting withwiresontoconnectors,pleasenotethattheredwireisthepositiveandshouldbeconnectedto pin#2,andtheblackwireisGroundandshouldbeconnectedtopin#1(GND).
»» CPUFanHeader(CPU_FAN1):SupportwatercoolingfanandCPUfan.

Chapter 2: Hardware installation | 11

24 Install System Memory DDR5 Modules
Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot.
Step 2: Insert the DIMM vertically and firmly into the slot until the retaining clips snap back in place and the DIMM is properly seated.
Note »» IftheDIMMdoesnotgoinsmoothly,donotforceit.Pullitallthewayoutandtryagain.
12 | Chapter 2: Hardware installation

B650EGTQ

Memory Capacity

DIMM Socket Location DDR5_A1 DDR5_A2 DDR5_B1 DDR5_B2

DDR5 Module 8GB/16GB/32GB 8GB/16GB/32GB 8GB/16GB/32GB 8GB/16GB/32GB

Total Memory Size Max is 128GB.

Dual Channel Memory Installation

Please refer to the following requirements to activate Dual Channel function:

Install memory module of the same density in pairs, shown in the table.

Dual Channel Status DDR5_A1 DDR5_A2 DDR5_B1 DDR5_B2

Enabled

X

O

X

O

Enabled

O

O

O

O

(O means memory installed, X means memory not installed.)

Note
»» Wheninstallingmorethanonememorymodule,werecommendtousethesamebrandand capacitymemoryonthismotherboard.
»» Wheninstallingasinglememory,werecommendthatyouinstallitintheDDR5_B2.

Chapter 2: Hardware installation | 13

25 Expansion Slots
PCIEX16_1: PCI-Express Gen5 x16 Slots (x16 or x8 mode) · PCI-Express 5.0 compliant. · The maximum bandwidth of the PCIe slot is 128GB/s in total.
PCIEX16_2: PCI-Express Gen4 · PCI-Express 4.0 compliant. · The maximum bandwidth of the PCIe slot is 64GB/s in total.
PCIEX1: PCI-Express Gen3 · PCI-Express 1.0 compliant. · The maximum bandwidth of the PCIe slot is 64GB/s in total.
M2M_CPU_1: M2 (M Key) Socket · Supports M.2 Type 2242/ 2260/ 2280 SSD module · Supports PCI-E 5.0x 4 (128Gb/s) – NVMe/ AHCI SSD
M2M_CPU_2: M2 (M Key) Socket · Supports M.2 Type 2280 SSD module · Supports PCI-E 5.0x 4 (128Gb/s) – NVMe/ AHCI SSD
M2M_SB: M2 (M Key) Socket · Supports M.2 Type 2280 SSD module · Supports PCI-E 4.0x 4 (64Gb/s) – NVMe/ AHCI SSD
14 | Chapter 2: Hardware installation

M2E-WIFI: M2 (E Key) Socket (M2 (E key) Wi-Fi card is not provided) · Support M.2 (E Key) socket module. · Supports WiFi/ Bluetooth module.

B650EGTQ

Install M2 COOLING Heatsink Steps of Removing the M.2 COOLING Heatsink:

Step 1: Before installing the M.2 SSD card, remove the two screws on the heat sink, and then remove the heat sink.

Step 2: Insert M.2 SSD card onto the M.2 slot and screw it onto the motherboard.

Step 3: After installing the M.2 SSD card, place the M.2 COOLING Heatsink over the M.2 slot and fasten the screws to fix the heatsink onto the motherboard.

Note
»» PleasefollowtheinstallationinstructionsofM.2COOLINGHeatsinkandremovetheM.2COOLING HeatsinktoinstalltheM.2SSDcardontoyourmotherboard.

Chapter 2: Hardware installation | 15

26 Jumper & Switch Setting
The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”.

Pin opened

Pin closed

Pin 1-2 closed

JCMOS1: Clear CMOS Jumper The jumper allows users to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard.
Pin 1-2 Open: Normal Operation (default).
Pin 1-2 Short: Clear CMOS data.
Clear CMOS Procedures: 1. Remove AC power line. 2. Set the jumper to “Pin 1-2 short”, you can use a metal object like a screwdriver to touch the
two pins. 3. Wait for five seconds. 4. After clearing the CMOS values, be sure the jumper is “Pin 1-2 open”. 5. Power on the AC. 6. Load Optimal Defaults and save settings in CMOS.

16 | Chapter 2: Hardware installation

B650EGTQ

27 Headers & Connectors

ATXPWR1: ATX Power Source Connector For better compatibility, we recommend to use a standard ATX 24-pin power supply for this connector. Make sure to find the correct orientation before plugging the connector.

Pin Assignment 13 +3.3V 14 -12V
15 Ground 16 PS_ON 17 Ground
18 Ground
19 Ground 20 NC 21 +5V 22 +5V 23 +5V 24 Ground

Pin Assignment 1 +3.3V 2 +3.3V
3 Ground 4 +5V
5 Ground 6 +5V
7 Ground 8 PW_OK 9 Standby Voltage+5V 10 +12V 11 +12V 12 +3.3V

ATX_12V_2X4: ATX Power Source Connector
The connector provides +12V to the CPU power circuit. If the CPU power plug is 4-pin, please plug it into Pin 1-2-5-6 of ATXPWR2.

Pin Assignment 1 +12V 2 +12V 3 +12V 4 +12V 5 Ground
6 Ground
7 Ground
8 Ground

ATX_12V_2X2: ATX Power Source Connector This connector will provide +12V to CPU power circuit.

Pin Assignment 1 +12V 2 +12V 3 Ground
4 Ground

Chapter 2: Hardware installation | 17

Note
»» Beforeyoupoweronthesystem,pleasemakesurethatbothATX_12V_2X4/ATX_12V_2X2 connectorshavebeenplugged-in.
»» Insufficientpowersuppliedtothesystemmayresultininstabilityortheperipheralsnotfunctioning properly.UseofaPSUwithahigherpoweroutputisrecommendedwhenconfiguringasystemwith morepower-consumingdevices.
F_PANEL: Front Panel Header This 10-pin header includes Power-on, Reset, HDD LED, Power LED connection.

Pin Assignment Function Pin Assignment

1 HDD LED(+) HDD 2 Power LED (+)

3 HDD LED(-) LED

4 Power LED (-)

5 Ground

Reset 6 Power Button

7 Reset Control Button 8 Ground

9 NC

NC

10 Key

Function
Power LED
Power-On Button Key

SPKR: Chassis Speaker Header Please connect the chassis speaker to this header.

Pin Assignment 1 +5V 2 N/A 3 N/A
4 Speaker

TPM_SPI: Trusted Platform Module Header This header allows you to store cryptographic keys that protect information.

Pin Assignment
1 +1.8V 3 TPM_RST# 5 N/A 7 +3.3V 9 SPI_CSI 11 SPI_DATAIN 13 SPI_I03

Pin Assignment
2 SPI_PIRQ 4 TPM_CS 6 SPI_I02 8 GND 10 SPI_CLK 12 SPI_DATAOUT
14 KEY

18 | Chapter 2: Hardware installation

SATA_1/ SATA_2/ SATA_3/ SATA_4: Serial ATA 60 Gb/s Connectors These connectors connect to SATA hard disk drives via SATA cables.

B650EGTQ

Pin Assignment 1 Ground 2 TX+ 3 TX4 Ground 5 RX6 RX+ 7 Ground

F_USB32_A-10G: Header for USB 32 (Gen2) Ports at Front Panel This header allows user to add additional USB ports on the PC front panel, and also can be
connected with a wide range of external peripherals.

Pin Assignment Pin

1 VBUS0

11

2 SSRX1-

12

3 SSRX1+

13

4 Ground

14

5 SSTX1-

15

6 SSTX1+

16

7 Ground

17

8 D1-

18

9 D1+

19

10 ID

20

Assignment D2+ D2-
Ground SSTX2+ SSTX2-
Ground SSRX2+ SSRX2VBUS1 Key

Chapter 2: Hardware installation | 19

F_USB20_1/ F_USB20_2: Header for USB 20 Ports at Front Panel This header allows user to add additional USB ports on the PC front panel, and also can be connected with a wide range of external peripherals.
Pin Assignment 1 +5V (fused) 2 +5V (fused) 3 USB4 USB5 USB+ 6 USB+ 7 Ground
8 Ground
9 Key 10 NC

F_AUDIO: Front Panel Audio Header This header allows user to connect the chassis-mount front panel audio I/O which supports HD and AC’97 audio standards.

HD Audio Pin Assignment 1 Mic Left in 2 Ground 3 Mic Right in 4 GPIO 5 Right line in 6 Jack Sense 7 Front Sense 8 Key 9 Left line in 10 Jack Sense

AC’97
Pin Assignment
1 Mic In
2 Ground
3 Mic Power
4 Audio Power 5 RT Line Out 6 RT Line Out 7 Reserved
8 Key 9 LFT Line Out 10 LFT Line Out

Note »» Itisrecommendedthatyouconnectahigh- definitionfrontpanelaudiomoduletothisconnectorto
availofthemotherboard’shighdefinitionaudiocapability. »» Pleasetrytodisablethe”FrontPanelJackDetection”ifyouwanttouseanAC’97frontaudiooutput
cable.ThefunctioncanbefoundviaO.S.AudioUtility.

20 | Chapter 2: Hardware installation

B650EGTQ
COM: Serial Port Connector The motherboard has a serial port header for connecting RS-232 Port.
Pin Assignment 1 Carrier detect 2 Received data 3 Transmitted data 4 Data terminal ready 5 Signal ground 6 Data set ready 7 Request to send 8 Clear to send 9 Ring indicator 10 Key
12V_LED: RGB LED Device (5050 SMD) Header This header providers 12V power and RGB control pins for RGB LED Device (5050 SMD).

Pin Cable Color Assignment

1 12V (Black) VCC12

2 G (Green) LED_GREEN

3 R (Red)

LED_RED

4 B (Blue)

LED_BLUE

5V_LED1/ 5V_LED2: Addressable RGB LED Device (WS2818B) Header This header providers 5V power and Data control pins for ARGB LED Device (WS2818B).
Pin Assignment 1 VCC5 2 Data 3 N/A 4 GND

Note »» EnsureproperpinconnectingtoyourLEDdevice,wrongconnectionmaydamageyourLEDdeviceor
motherboard. »» The12V_LEDconnectorsupportsto5050RGBLEDstripswiththemaximumpowerratingof3A
(12V). »» The5V_LEDconnectorsupportsupto300LEDsWS2818BindividuallyAddressableRGBLEDstrips
withthemaximumpowerratingof3A(5V). »» PleaseusetheVividLEDDJsoftwaretocontroltheLEDs.Fordetailedsoftwaresettinginformation,
refertochapter3.3.
Chapter 2: Hardware installation | 21

28 LEDs Debug LED: Debug LED Indicators
This LEDs indicate the status of the motherboard. DRAM – indicates DRAM is not detected or fail. CPU – indicates CPU is not detected or fail. VGA – indicates GPU is not detected or fail. BOOT – indicates booting device is not detected or fail.
Note »» Afterstartingthecomputer,theLEDindicatorswilllightupinthefollowingorder:
DRAMCPUVGABOOT »» Whenthecomputerisready,theLEDindicatorwillshowwheretheerroroccurredandwillstayon
untiltheproblemissolved. »» Afterthecomputerisstarted,theDebugLEDwillnotlightupifthereisnoabnormalitydetected.
LEDs Below LEDs are controlled by RACING GT EVO program. Please refer to Chapter 3.3 for more detail software setting.
RGB LED Header(5V/12V)
22 | Chapter 2: Hardware installation

Chapter 3: UEFI BIOS & Software

B650EGTQ

31 UEFI BIOS Setup
· The BIOS Setup program can be used to view and change the BIOS settings for the computer. The BIOS Setup program is accessed by pressing the key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins.
· For further information of setting up the UEFI BIOS, please refer to the UEFI BIOS Manual on our website.
32 BIOS Update
The BIOS can be updated using either of the following utilities: · BIOSTAR BIO-Flasher: Using this utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a CD-ROM. · BIOSTAR BIOS Update Utility: It enables automated updating while in the Windows environment. Using this utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a CD-ROM, or from the file location on the Web.
33 Motherboard BIOS Update
· Upload the newly update of BIOS into USB drive, change the file name to : CREATIVE. ROM (type each letter as exactly). For example: B65AQ907.BST to CREATIVE.ROM
· Connect the power into ATX 24PIN at motherboard, turn on AC power (only turn on Power supply unit, no need for power on)
· Insert USB Drive with the file name: CREATIVE.ROM into programmer(hardware)

· Press BIOS Update button for 3~5 seconds, LED will start flickering, when LED light is off, then the burning is completed.

Chapter 3: UEFI BIOS & Software | 23

BIOSTAR BIO-Flasher
Note »» ThisutilityonlyallowsstoragedevicewithFAT32/16formatandsinglepartition. »» ShuttingdownorresettingthesystemwhileupdatingtheBIOSwillleadtosystembootfailure.
Updating BIOS with BIOSTAR BIOS Flasher 1. Go to the website to download the latest BIOS file for the motherboard. 2. Then, copy and save the BIOS file into a USB flash (pen) drive.(Only supported FAT/FAT32
format) 3. Insert the USB pen drive that contains the BIOS file to the USB port. 4. Power on or reset the computer and then press during the POST process. 5. After entering the POST screen, the BIOS-
FLASHER utility pops out. Choose to search for the BIOS file.
6. Select the proper BIOS file, and a message asking if you are sure to flash the BIOS file. Click “Yes” to start updating BIOS.
7. A dialog pops out after BIOS flash is completed, asking you to restart the system. Press the key to restart system.
24 | Chapter 3: UEFI BIOS & Software

B650EGTQ 8. While the system boots up and the full screen logo shows up, press key to enter BIOS
setup. After entering the BIOS setup, please go to the <Save & Exit>, using the function to load Optimized Defaults, and select <Save Changes and Reset> to restart the computer. Then the BIOS Update is completed. BIOS Update Utility (through the Internet) 1. Installing BIOS Update Utility from the DVD Driver. 2. Please make sure the system is connected to the internet before using this function.
3. Launch BIOS Update Utility and click the “Online Update” button on the main screen.
4. An open dialog will show up to request your agreement to start the BIOS update. Click “Yes” to start the online update procedure.
5. If there is a new BIOS version, the utility will ask you to download it. Click “Yes” to proceed.
6. After the download is completed, you will be asked to program (update) the BIOS or not. Click “Yes” to proceed.
7. After the updating process is finished, you will be asked you to reboot the system. Click “OK” to reboot.
8. While the system boots up and the full screen logo shows up, press key to enter BIOS setup.
After entering the BIOS setup, please go to the <Save & Exit>, using the

function to load Optimized Defaults, and select and to restart the computer. Then, the BIOS Update is completed. Chapter 3: UEFI BIOS & Software | 25

BIOS Update Utility (through a BIOS file) 1. Installing BIOS Update Utility from the DVD Driver. 2. Download the proper BIOS from http://www.biostar.com.tw/
3. Launch BIOS Update Utility and click the “Update BIOS” button on the main screen.
4. A warning message will show up to request your agreement to start the BIOS update. Click “OK” to start the update procedure.
5. Choose the location for your BIOS file in the system. Please select the proper BIOS file, and then click on “Open”. It will take several minutes, please be patient.
6. After the BIOS Update process is finished, click on “OK” to reboot the system.
7. While the system boots up and the full screen logo shows up, press key to enter BIOS setup.
After entering the BIOS setup, please go to the <Save & Exit>, using the

function to load Optimized Defaults, and select to restart the computer. Then, the BIOS Update is completed. 26 | Chapter 3: UEFI BIOS & Software

Backup BIOS Click the Backup BIOS button on the main screen
for the backup of BIOS, and select a proper location for your backup BIOS file in the system,
and click “Save”.

B650EGTQ

Chapter 3: UEFI BIOS & Software | 27

34 Software Installing Software
1. Insert the Setup DVD to the optical drive. The driver installation program would appear if the Auto-run function has been enabled.
2. Select Software Installation, and then click on the respective software title. 3. Follow the on-screen instructions to complete the installation. Launching Software After the installation process is completed, you will see the software icon showing on the desktop. Double-click the icon to launch it.
Note »» Alltheinformationandcontentaboutfollowingsoftwarearesubjecttobechangedwithoutnotice.
Forbetterperformance,thesoftwareisbeingcontinuouslyupdated. »» Theinformationandpicturesdescribedbelowareforyourreferenceonly.Theactualinformation
andsettingsonboardmaybeslightlydifferentfromthismanual. BIOScreen Utility This utility allows you to personalize your boot logo easily. You can choose BMP as your boot logo so as to customize your computer.
Please follow the step-by-step instructions below to update boot logo: · Load Image: Choose the picture as the boot logo. · Transform: Transform the picture for BIOS and preview the result. · Update Bios: Write the picture to BIOS Memory to complete the update.
28 | Chapter 3: UEFI BIOS & Software

B650EGTQ RACING GT EVO RACING GT EVO is an easy-to-use program that integrates several BIOSTAR utilities and allows users to configure these utilities simultaneously and seamlessly.
Note »» MenucontentsofRACINGGTEVOwillbedifferentslightly,dependingondifferentmotherboardof
users’computers. »» Whenthesoftwareisinstalledorremoved,restartyourcomputer. System Information This System Information tab provides you an overview of the basic system information.
1 Clocks: Shows core speed, multiplier and bus speed. 2 Motherboard: Shows motherboard information. 3 Processor: Shows CPU information. 4 Memory: Shows memory information. »» Clickondifferentmemoryslotbuttonstogetthememoryinformation.
Chapter 3: UEFI BIOS & Software | 29

SmartEAR Smart EAR allows you to control system volume and adjust impedance setting (Low/High Gain) to optimize your headphone performance. You can easily enjoy high-quality and awesome sound. Requirements: 1. A chassis with front audio output jacks 2. An earphone or a headphone 3. Windows 7 (32/64bit)/ 8.1(64bit)/ 10(64bit) operation system Installation Guide: 1. Make sure the front audio cable of the chassis connected to the front audio header of the motherboard properly. 2. Install the RACING GT EVO program from the driver DVD. 3. Connect the earphone or headphone to the front audio jack of the chassis or audio lineout port of rear I/Os. »» IfyouwanttouseanAC’97frontaudiooutputcable,pleasedisablethe”FrontPanelJack
Detection”setting.ThissettingcanbefoundviaO.S.AudioUtility.
1 Volume Control Knob: The volume can be finely adjusted by turning the knob either clockwise or anti-clockwise to increase or decrease system volume accordingly. 2 Mute: To disable system sound. 3 High/Low Gain Switch: Keep the gain switch to low for low impedance headphone and set to high for high impedance headphone.
30 | Chapter 3: UEFI BIOS & Software

B650EGTQ GT Touch GT Touch allows you to adjust Normal, ECO and Sport mode when running RACING GT EVO program in Windows environment.
1 Normal Mode: It balances energy consumption and system performance. 2 ECO Mode: It saves energy by slightly reducing system performance. 3 Sport Mode: It provides the highest level of system performance.
Chapter 3: UEFI BIOS & Software | 31

Vivid LED DJ Vivid LED DJ can adjust your color scheme of ARMOR GEAR, RGB LED Device.
1 LED COMMANDER: Allows you to select the LED mode. · Default : Default LED illuminations. (Blue light) · RGB Sync : Allows you to synchronize the LED Type item settings. 2 LED Type: Select the LED lighting blocks. · System : System LED illuminations. (Racing ARMOR) · 12V LED : The 12V LED illumination. (12V_LED Device) · 5V LED : The 5V LED illumination. (5V_LED Device) · Memory Sync : The RGB Audio LED illumination. (Memory LED) 3 ON/OFF: To enable or disable VIVID LED function. 4 ON/OFF: Allows you to enable or disable LED of a single item. 5 Auto: LEDs will Automatically change the Color Palette and LED Brightness. »» IfyouselectAutomode,theColorPalletteandLEDBrightnessBarwilldisabled. 6 LED SPARKLE: Allows to you choose sparkle of the LEDs. · Permanent: LEDs are constantly lit. · Shine: LEDs flash at a specific frequency. · Breath: LEDs gradually flash on and off. · Shine & Music: LEDs will flash according the music played on your system. »» Pleasemakesureyourspeakerorearphoneisproperlyconnectedtoaudiojackbeforeusing
RACINGGTEVOprogram. · Meteor: LEDs slide at a specific frequency. · Wave: LEDs are presented in a water wave rhythm. · Starry sky: LEDs flicker at a specific rhythm. · Lightning: LEDs flash and slide at a specific frequency. · Rainbow: LEDs lights to dazzling colorful rhythm. · Aurora: LEDs shows soft light and flickers lightly. 7 High/Low Speed Switch: Allows you to control the flicker speed. 32 | Chapter 3: UEFI BIOS & Software

B650EGTQ
8 LED Brightness Bar: Allows you to adjust the LED brightness. 9 Color Palette: Allows to you choose specific color of the LEDs.
Note »» WithVIVIDLEDDJuserscancontrolthefourLEDlightzonesindependentlywithdifferentflashing
modes(LEDSPARKLE).
Chapter 3: UEFI BIOS & Software | 33

AI Fan A.I FAN utility smartly allows PC users to have more customizability of fan operating modes and automatically detects different temperatures to make fan operating at defined speed for optimal cooling performance.
1 Temperature: Shows the current CPU and system temperature. 2 CPU FAN/ CPU OPT RPM & SYSTEM1/2/3 RPM: Click button to set the status value of CPU and system fan. »» Displayitems,pleasefocusontheactualmotherboard. 3 Default: Restore defaults your changes value of a single item. 4 PWM/ Temperature Panel: According to the fan PWM value corresponding to CPU and system temperature to adjust the fan speed. »» Allowsyoutoadjustaccordingtoyourpreferences. 5 User Selection: Sets the fan property controls the actual selection operation. · Auto: Allows you to adjust the Automatic detection Mode. · DC: Allows you to adjust the Direct Current (DC) Mode. · PWM: Allows you to adjust the Pulse Width Modulation (PWM) Mode. 6 Control Mode: Allows you to control mode of the fans. · Quiet: Enable Quiet mode. · Aggressive: Enable Aggressive mode. · Manual: Enable Manual mode. · Full on: Enable Full On mode.
34 | Chapter 3: UEFI BIOS & Software

B650EGTQ H/W Monitor The HW Monitor tab allows you to monitor hardware voltage, fan speed, and temperature.
1 CPU Temperature/System Temperature/ MOS Temperature: Shows the current CPU, system temperature and Mos Temperature.
2 Fan: Shows the current fans’ speed. 3 Voltage: Shows the current voltages of CPU and memory. 4 Current: Shows the current of PSU 12V ,CPU and CPU GT.
Chapter 3: UEFI BIOS & Software | 35

OC/OV The OC/OV tab allows you to save or load the OC/OV setting profiles, change system frequency and voltage settings.
1 OC: Allows you to adjust overclocking profile values. 2 OV: Allows you to adjust voltage profile values. 3 Default: Restore defaults your changes. 4 Apply: Apply your changes. 5 Load: Load the profile values from the file. 6 Save: Store the profile values for future use.
Note »» NotalltypesofCPUperformaboveoverclocksettingideally;thedifferencewillbebasedonthe
selectedCPUmodel. »» Overclockisanoptionalprocess,butnota”must- do”process;itisnotrecommendedfor
inexperiencedusers.Therefore,wewillnotberesponsibleforanyhardwaredamagewhichmaybe causedbyoverclocking.Wealsowouldnotguaranteeanyoverclockingperformance.
36 | Chapter 3: UEFI BIOS & Software

About The About menu to display the Racing GT EVO Utility version information.

B650EGTQ

Chapter 3: UEFI BIOS & Software | 37

Chapter 4: Useful help
41 Driver Installation
After you installed your operating system, please insert the Fully Setup Driver DVD into your optical drive and install the driver for better system performance. You will see the following window after you insert the DVD
The setup guide will auto detect your motherboard and operating system. A Driver Installation To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system. Click on each device driver to launch the installation program. B Software Installation To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program. C Manual Aside from the paperback manual, we also provide manual in the Driver DVD. Click on the Manual icon to browse for available manual.
Note »» Ifthiswindowdidn’tshowupafteryouinserttheDriverDVD,pleaseusefilebrowsertolocateand
executethefileSETUP.EXEunderyouropticaldrive. »» YouwillneedAcrobatReadertoopenthemanualfile.PleasedownloadthelatestversionofAcrobat
Readersoftwarefromhttp://get.adobe.com/reader/ »» Themotherboardusedintheillustrationsmaynotresembletheactualboard.theseillustrationsare
forreferenceonly.
38 | Chapter 4: Useful help

B650EGTQ

42 AMI BIOS Beep Code

Boot Block Beep Codes

Number of Beeps Continuing

Description Memory sizing error or Memory module not found

POST BIOS Beep Codes

Number of Beeps 1 8

Description Success booting. Display memory error (system video adapter)

43 AMI BIOS post code

Code 10 11 15 19 2B 2C 2D 2E 2F

Description
PEI Core is started
Pre-memory CPU initialization is started Pre-memory North Bridge initialization is started Pre-memory South Bridge initialization is started Memory initialization. Serial Presence Detect (SPD) data reading Memory initialization. Memory presence detection Memory initialization. Programming memory timing information Memory initialization. Configuring memory Memory initialization (other).

31

Memory Installed

32

CPU post-memory initialization is started

33

CPU post-memory initialization. Cache initialization

34

CPU post-memory initialization. Application Processor(s) (AP) initialization

35

CPU post-memory initialization. Boot Strap Processor (BSP) selection

36

CPU post-memory initialization. System Management Mode (SMM) initialization

37

Post-Memory North Bridge initialization is started

3B

Post-Memory North Bridge initialization (North Bridge module specific)

4F

DXE IPL is started

60

DXE Core is started

F0

Recovery condition triggered by firmware (Auto recovery)

F1

Recovery condition triggered by user (Forced recovery)

F2

Recovery process started

F3

Recovery firmware image is found

F4

Recovery firmware image is loaded

E0

S3 Resume is stared (S3 Resume PPI is called by the DXE IPL)

E1

S3 Boot Script execution

E2

Video repost

E3

OS S3 wake vector call

60

DXE Core is started

61

NVRAM initialization

62

Installation of the South Bridge Runtime Services

63

CPU DXE initialization is started

68

PCI host bridge initialization

69

North Bridge DXE initialization is started

6A

North Bridge DXE SMM initialization is started

Chapter 4: Useful help | 39

Code 70 71 72 78 79 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AB AD AE AF B0 B1 B2 B3 B4 B5 B6 B7

Description South Bridge DXE initialization is started South Bridge DXE SMM initialization is started South Bridge devices initialization South Bridge DXE Initialization (South Bridge module specific) ACPI module initialization Boot Device Selection (BDS) phase is started Driver connecting is started PCI Bus initialization is started PCI Bus Hot Plug Controller Initialization PCI Bus Enumeration
PCI Bus Request Resources
PCI Bus Assign Resources
Console Output devices connect
Console input devices connect Super IO Initialization USB initialization is started USB Reset USB Detect USB Enable IDE initialization is started
IDE Reset
IDE Detect
IDE Enable SCSI initialization is started
SCSI Reset
SCSI Detect
SCSI Enable
Setup Verifying Password
Start of Setup
Setup Input Wait
Ready To Boot event Legacy Boot event
Exit Boot Services event Runtime Set Virtual Address MAP Begin Runtime Set Virtual Address MAP End Legacy Option ROM Initialization
System Reset USB hot plug
PCI bus hot plug Clean-up of NVRAM Configuration Reset (reset of NVRAM settings)

40 | Chapter 4: Useful help

B650EGTQ

44 Troubleshooting

Probable

Solution

1. There is no power in the system. Power LED does 1. Make sure power cable is securely plugged in.

not shine; the fan of the power supply does not work 2. Replace cable.

2. Indicator light on keyboard does not shine.

3. Contact technical support.

System is inoperative. Keyboard lights are on, power Using even pressure on both ends of the DIMM, indicator lights are lit, and hard drives are running. press down firmly until the module snaps into place.

1. Check cable running from disk to disk controller

board. Make sure both ends are securely plugged in;

System does not boot from a hard disk drive, but can check the drive type in the standard CMOS setup.

be booted from optical drive.

2. Backing up the hard drive is extremely important.

All hard disks are capable of breaking down at any time.

System only boots from an optical drive. Hard disks 1. Back up data and applications files. can be read, applications can be used, but system 2. Reformat the hard drive. Re-install applications

fails to boot from a hard disk.

and data using backup disks.

Screen message shows “Invalid Configuration” or “CMOS Failure.”

Review system’s equipment. Make sure correct information is in setup.

1. Set master/slave jumpers correctly.

System cannot boot after user installs a second hard 2. Run SETUP program and select correct drive types.

drive.

Call the drive manufacturers for compatibility with

other drives.

CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again.

In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection function. 1. Remove the power cord from power supply for seconds. 2. Wait for seconds. 3. Plug in the power cord and boot up the system.

Or you can: 1. Clear the CMOS data. (See “Close CMOS Header: JCMOS1″ section) 2. Wait for seconds.
3. Power on the system again.

Chapter 4: Useful help | 41

45 RAID Functions RAID Definitions
In a RAID 0 system data are split up in blocks that get written across all the drives in the array. By using multiple disks (at least 2) at the same time, this offers superior I/O performance. This performance can be enhanced further by using multiple controllers, ideally one controller per disk.
Features and Benefits · Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the platform. · Uses: Intended for non-critical data requiring high data throughput, or any environment that does not require fault tolerance. · Benefits: provides increased data throughput, especially for large files. No capacity loss penalty for parity. · Drawbacks: Does not deliver any fault tolerance. If any drive in the array fails, all data is lost. · Fault Tolerance: No. · Total Capacity: (Minimal. HDD Capacity) x (Connected HDDs Amount)
Data are stored twice by writing them to both the data disk (or set of data disks) and a mirror disk (or set of disks) . If a disk fails, the controller uses either the data drive or the mirror drive for data recovery and continues operation. You need at least 2 disks for a RAID 1 array.
Features and Benefits · Drives: Minimum 2, and maximum is 2. · Uses: RAID 1 is ideal for small databases or any other application that requires fault tolerance and minimal capacity. · Benefits: Provides 100% data redundancy. Should one drive fail, the controller switches to the other drive. · Drawbacks: Requires 2 drives for the storage space of one drive. Performance is impaired during drive rebuilds. · Fault Tolerance: Yes.
42 | Chapter 4: Useful help

B650EGTQ RAID 10 combines the advantages (and disadvantages) of RAID 0 and RAID 1 in one single system. It provides security by mirroring all data on a secondary set of disks (disk 3 and 4 in the drawing below) while using striping across each set of disks to speed up data transfers. Features and Benefits · Drives: Minimum 4, and maximum is 6 or 8, depending on the platform. · Benefits: Optimizes for both fault tolerance and performance, allowing for automatic redundancy. May be simultaneously used with other RAID levels in an array, and allows for spare disks. · Drawbacks: Requires twice the available disk space for data redundancy, the same as RAID level 1. · Fault Tolerance: Yes.
Chapter 4: Useful help | 43

Arabic

APPENDIX I: Specifications in Other Languages

.RyzenTMseries 7000 AMD®AM5 .BIOSRyzenTMAMD®
.CPU www.biostar.com.tw
AMD B650E RyzenTMseries 7000 AMD® Processor : DDR5-4800/5200/5400(OC)/5600(OC)/6000+(OC) . . . 128 DIMM DDR5 . . . 4x DDR5 . . 32 /16 /8ECCUn-bufferedECC DIMM . www.biostar.com.tw
AHCI,10 /1 /0 : SATAIII(6Gb/s) RAID 4x 3xM.24xSATA III(6Gb/s) M.2(M Key):(M2M_CPU_1)x1
.SSD/2280 /2260 /2242 Type M.2 SSDAHCI/NVMe – (64Gb/s) 4× 4.0 /(128Gb/s) 4× 5.0 PCI-E
:M.2(M Key)(M2M_CPU_2)x1 .SSD 2280 Type M.2
SSDAHCI/NVMe – (64Gb/s) 4× 4.0 /(128Gb/s) 4× 5.0 PCI-E :M.2(M Key)(M2M_SB)x1 .SSD 2280 Type M.2
SSDAHCI/NVMe – (64Gb/s) 4× 4.0 PCI-E
RealtekRTL8125B
/ / 2500 /1000 / 100 / 10
ALC1220
Hi-Fi (Front), 7.1 ( 1)(Gen2x2) 3.2USBTYPE- C 1x ( 2 3)(Gen2) 3.2USB 5x
( 2)(Gen1) 3.2USB 2x ( 4 2)USB 2.0 6x
(x16/ x8)16 x5.0 PCIe 1x (x4)4 x4.0 PCIe 1x (x1)1 x3.0 PCIe 1x WIFI2x / PS/21x BIOS update Button 1x (HDMI1.4) HDMI 1x (DP1.2) DP 1x
Type-C USB (Gen2x2) 3.2 1x Type-A USB(Gen2) 3.2 3x Type-A USB (Gen1) 3.2 2x Type-AUSB2.0 2x LAN 1x 3x

LAN
USB

«

44 | APPENDIX I: Specifications in Other Languages

B650EGTQ

SATA III(6.0Gb/s) 4x Wi-Fi 2230 Bluetooth : (Key E) M.2 1x (2.0 USB ) 2.0 USB 2x (USB(Gen2)3.2 ) USB(Gen2) 3.2 1x
1×4 1×8 24 1x 1x (CPU_OPT) 1x 3x 1x 1x 1x CMOS 2x
1x TPM 1x
(5V)ELD2x (12V)LED1x
IO LED 1x SB LED 1x Wi-Fi M.2(E Key) *
244 x 244 u-ATX 11(64bit) /10(64bit)
. BIOSTAR

APPENDIX I: Specifications in Other Languages | 45

German

Spezifikationen

CPU-Unterstützung Chipset Festplattenspeicher
Arbeitsspeicher
LAN Audio-Codec USB Erweiterungsanschlüsse
Hintere I/Os

Sockel AM5 unterstützt AMD® 7000 serie RyzenTM Prozessoren Unterstützung für zukünftige AMD Ryzen-Prozessoren mit BIOS-Update Bitte konsultieren Sie www.biostar.com.tw für CPU-Unterstützungsliste
AMD B650E
AMD Ryzen 7000 series Processors:
Unterstützt zweikanaliges DDR5 4800/ 5200/ 5400(OC)/ 5600(OC)/ 6000+(OC) 4 x DDR5 DIMM-SpeicherSlot, Max. Uterstützung bis zu 128 GB-Speicher Jedes DIMM unterstützt nicht-ECC und ECC Un-gepuffert 8/16/32 GB DDR5-Module
Bitte konsultieren Sie www.biostar.com.tw für für Speicherunterstützung Liste. 4x SATA III 6Gb-Verbindung : Unterstützt AHCI & RAID 0,1,10 Total unterstützt 3 x M.2-Sockel und 4 x SATA Ports (6Gb/s) 1x M.2 (M Key) Slot(M2M_CPU_1): Unterstützt M.2 Typ 2242/ 2260/ 2280 SSD-Modul Unterstützt PCI-E 5.0 x4 (128Gb/s)/ 4.0 x4 (64Gb/s) – NVMe/ AHCI SSD 1x M.2 (M Key) Slot(M2M_CPU_2): Unterstützt M.2 Typ 2280 SSD-Modul Unterstützt PCI-E 5.0 x4 (128Gb/s)/ 4.0 x4 (64Gb/s) – NVMe/ AHCI SSD 1x M.2 (M Key) Slot(M2M_SB): Unterstützt M.2 Typ 2280 SSD-Modul Unterstützt PCI-E 4.0 x4 (64Gb/s) – NVMe/ AHCI SSD Realtek RTL8125B 10/ 100/ 1000/ 2500 Mb Auto-Negotiation, Halb- / Voll-Duplex-fähig ALC1220 7.1 Kanäle, HD-Audio, Hi-Fi(Front) 1x USB 3.2 (Gen2x2) TYPE-C-Port (1 hintere I/O) 5x USB 3.2 (Gen2) Port (3 hintere I/O und 2 via interne Header) 2x USB 3.2 (Gen1) Port (2 hintere I/O) 6x USB 2.0-Port (2 hintere I/O und 4 via interne Header) 1x PCIe 5.0 x16-Slot(x16-modus /x8-modus ) 1x PCIe 4.0 x4-Slot(x4-modus) 1x PCIe 3.0 x1-Slot(x1-modus)
2x WIFI Antenna-Port
1x PS/2-Keyboard & Maus-Port
1x BIOS Update Button 1x HDMI Port (HDMI1.4) 1x DP Port (DP1.2) 1x USB 3.2(Gen2x2) TYPE-C-Port 3x USB 3.2(Gen2) TYPE-A-Port 2x USB 3.2(Gen1) TYPE-A-Port 2x USB 2.0 TYPE-A-Port 1x 2.5G LAN port
3x Audio Jack

»» ContinuedonNextPage

46 | APPENDIX I: Specifications in Other Languages

B650EGTQ

Spezifikationen
Interne I/Os
Formfaktor OS-Unterstützung

4x SATA III-Verbindung (6Gb/s) 1x M.2 (E Key) Steckdose : Unterstützt 2230 Art Wi-Fi & Bluetooth Modul 2x USB 2.0-Header (jeder Header unterstützt 2 USB 2.0-Ports) 1x USB 3.2(Gen2)-Header (jeder Header unterstützt 2 USB 3.2(Gen2)-Ports)
1x 4-Pin-Stromverbindung
1x 8-Pin-Stromverbindung
1x 24-Pin-Stromverbindung 1x CPU-Ventilatorverbindung 1x CPU Wasserkühlung- Ventilatorverbindung (CPU_OPT) 3x System-Ventilatorverbindung 1x Header für Frontpanel 1x Header für Frontaudio 1x Header Internet Stereo-Lautsprecher
2x Header CMOS-Schaltertaste 1x Header für Seriellen Anschluss 1x Header für TPM 2x Header LED (5V) 1x Header LED (12V) 1x Header IO LED 1x Header SB LED * M.2 (E Key) Wi-Fi-Karte wird nicht mitgeliefert
u-ATX Formfaktor, 244 mm x 244 mm
Windows 10(64bit) / Windows 11(64bit) Biostar reserves the right to add or remove support for any OS with or without notice

APPENDIX I: Specifications in Other Languages | 47

Spanish

Especificaciones

Compatibilidad con el procesador

Socket AM5 admite procesadores AMD® 7000 serie RyzenTM
Soporte para futuros procesadores AMD Ryzen con actualización del BIOS *Por favor consultar con www.biostar.com.tw para la lista de compatibilidad con el procesador.

Tipo de Placa

AMD B650E

Memoria
Almacenamiento de información
LAN Códec Audio USB Ranuras de Extinción
Panel trasero de E/S

AMD Ryzen 7000 series Processors:
Soporta DDR5 4800/ 5200/ 5400(OC)/ 5600(OC)/ 6000+(OC) Doble Canal
4x DDR5 DIMM Ranura de memoria Soporta hasta 128 GB Memoria
Cada DIMM soporta un modulo non-ECC y ECC sin tampones 8/16/32 GB DDR5
*Por favor consultar con www.biostar.com.tw para la lista de compatibilidad con el memoria. Conector 4x SATA III (6Gb/s): Soporta AHCI & RAID 0,1,10 Total Soporta 3 x zócalos M.2 y 4 x puertos SATA III (6Gb/s) 1x M.2 (M Key) Espacio(M2M_CPU_1): Soporta módulo M.2 tipo 2242/ 2260/ 2280 SSD Soporta PCI-E 5.0 x4 (128Gb/s)/ 4.0 x4 (64Gb/s) – NVMe/ AHCI SSD 1x M.2 (M Key) Espacio(M2M_CPU_2): Soporta módulo M.2 tipo 2280 SSD Soporta PCI-E 5.0 x4 (128Gb/s)/ 4.0 x4 (64Gb/s) – NVMe/ AHCI SSD 1x M.2 (M Key) Espacio(M2M_SB): Soporta módulo M.2 tipo 2280 SSD Soporta PCI-E 4.0 x4 (64Gb/s) – NVMe/ AHCI SSD Realtek RTL8125B
10/ 100/ 1000/ 2500 Mb/s auto negociación, capacidad dúplex Mitad/Completo
ALC1220 Canales Audio de Alta Definición 7.1, Hi-Fi(Front) Ranura 1x USB 3.2 (Gen2x2) TYPE-C (1 en las entradas/salidas posteriores) Ranura 5x USB 3.2 (Gen2) (3 en las entradas/salidas posteriores y 2 por los distribuidores internos) Ranura 2x USB 3.2 (Gen1) (2 en las entradas/salidas posteriores) Ranura 6x USB 2.0 (2 en las entradas/salidas posteriores y 4 por los distribuidores internos) Ranura 1x PCIe 5.0 x16(x16 carriles / x8 carriles) Ranura 1x PCIe 4.0 x4(x4 carriles) Ranura 1x PCIe 3.0 x1(x1 carriles)
Ranura 2x WIFI Antenna
Teclado/ Ratón 1x PS/2
1x BIOS Update Button Ranura 1x HDMI (1.4) Ranura 1x DP (1.2) Ranura 1x USB 3.2(Gen2x2) TYPE-C Ranura 3x USB 3.2(Gen2) TYPE-A Ranura 2x USB 3.2(Gen1) TYPE-A Ranura 2x USB 2.0 TYPE-A Ranura 1x 2.5G LAN
Socket audio 3x

»» Continúaenlasiguientepágina

48 | APPENDIX I: Specifications in Other Languages

B650EGTQ

Especificaciones
Conectores en placa
Factor de Forma Soporte OS

Conector 4x SATA III (6Gb/s) 1x M.2 (E Key) : Soporta 2230 tipo Wi-Fi & Bluetooth module Distribuidor 2x USB 2.0 (cada distribuidor soporta 2 ranuras USB 2.0) Distribuidor 1x USB 3.2(Gen2) (cada distribuidor soporta 2 ranuras USB 3.2(Gen2)) Conector con 4 patillas x1 Conector con 8 patillas x1 Conector con 24 patillas x1 Conector Ventilador procesador x1 Conector Refrigeración por agua de la CPU x1 (CPU_OPT) Conector Ventilador Sistema x3
Distribuidor Panel Frontal x1
Distribuidor Audio Frontal x1
Conector Altavoz x1
Distribuidor CMOS claro x2
Distribuidor Ranura Serie x1
Distribuidor TPM x1 Distribuidor LED (5V) x2 Distribuidor LED (12V) x1 Distribuidor IO LED x1 Distribuidor SB LED x1 * No se proporciona la tarjeta Wi-Fi M.2 (E Key)
Factor de Forma u-ATX, 244 mm x 244 mm
Windows 10(64bit) / Windows 11(64bit) Biostar reserva su derecho de añadir o retirar el soporte para cada OS con o sin notificación.

APPENDIX I: Specifications in Other Languages | 49

Thai

Socket AM5 AMD® 7000 series RyzenTM.

AMD Ryzen .

  • www.biostar.com.tw

AMD B650E

I/O

AMD Ryzen 7000 series Processors: Dual Channel DDR5 4800/ 5200/ 5400(OC)/ 5600(OC)/ 6000+(OC) 4 DDR5 DIMM 128 GB DIMM non-ECC ECC Un-buffered 8/16/32 GB DDR5 * www.biostar.com.tw 4x SATA III (6Gb/s): AHCI & RAID 0,1,10 3 x M.2 4 x SATA III (6Gb/s) 1x M.2 (M Key) (M2M_CPU_1): M.2 2242/ 2260/ 2280 SSD PCI-E 5.0 x4 (128Gb/s) / 4.0 x4 (64Gb/s) – NVMe/ AHCI SSD 1x M.2 (M Key) (M2M_CPU_2): M.2 2280 SSD PCI-E 5.0 x4 (128Gb/s) / 4.0 x4 (64Gb/s) – NVMe/ AHCI SSD 1x M.2 (M Key) (M2M_SB): M.2 2280 SSD PCI-E 4.0 x4(64Gb/s) – NVMe/ AHCI SSD Realtek RTL8125B 10/ 100/ 1000/ 2500 Mb/s , Half / Full ALC1220 7.1 Channels, High Definition Audio, Hi-Fi(Front) 1x USB 3.2 (Gen2x2) Type-C (1 I/O) 5x USB 3.2 (Gen2) (3 I/O 2 ) 2x USB 3.2 (Gen1) (2 I/O) 6x USB 2.0 (2 I/O 4 ) 1x PCIe 5.0 x16 ( x16 / x8) 1x PCIe 4.0 x4 ( x4) 1x PCIe 3.0 x1 ( x1) 2x 1x PS/2 & 1x BIOS Update Button 1x HDMI (HDMI1.4) 1x DP (DP1.2) 1x USB 3.2 (Gen2x2) Type-C 3x USB 3.2 (Gen2) Type-A 2x USB 3.2 (Gen1) Type-A 2x USB 2.0 Type-A 1x 2.5G LAN 3x Audio Jack

»

50 | APPENDIX I: Specifications in Other Languages

B650EGTQ

I/O
OS

4x SATA III (6Gb/s) 1x M.2 (E Key) : 2230 Wi-Fi Bluetooth 2x USB 2.0 ( 2 USB 2.0) 1x USB 3.2 (Gen2) ( 2 USB 3.2 (Gen2)) 1x 4-Pin Power 1x 8-Pin Power 1x 24-Pin Power 1x CPU Fan 1x CPU (CPU_OPT) 3x Fan 1x 1x 1x 2x CMOS 1x Serial Port 1x TPM 2x LED (5V) 1x LED (12V) 1x LED IO 1x SB LED * M.2 (E Key) Wi-Fi
u-ATX , 244. x 244. Windows 10(64bit) / Windows 11(64bit) Biostar OS

APPENDIX I: Specifications in Other Languages | 51

Japan

CPU

LAN USB
I/O

Socket AM5 support AMD® RyzenTM 7000 series Processors
BIOSAMD® RyzenTM CPUwww.biostar.com.tw AMD B650E
AMD Ryzen 7000 series Processors:
DDR5 4800/ 5200/ 5400(OC)/ 5600(OC)/ 6000+(OC) 4x DDR5 DIMM128 GB DIMMECC 8/ 16/ 32GB DDR5
www.biostar.com.tw 4x SATA III(6Gb/s)AHCIRAID 0/1/10 3 M.2 4 SATAIII(6Gb/s) 1x M.2 (M Key) (M2M_CPU_1): M.2 Type 2242/ 2260/ 2280 SSD PCI-E 5.0 x4 (128Gb/s)/ 4.0 x4(64Gb/s) – NVMe/ AHCI SSD 1x M.2 (M Key) (M2M_CPU_2): M.2 Type 2280 SSD PCI-E 5.0 x4 (128Gb/s)/ 4.0 x4(64Gb/s) – NVMe/ AHCI SSD 1x M.2 (M Key) (M2M_SB): M.2 Type 2280 SSD PCI-E 4.0 x4 (64Gb/s) – NVMe/ AHCI SSD Realtek RTL8125B 10/ 100/ 1000/ 2500 Mb// ALC1220 7.1HDHi-Fi() 1x USB 3.2 (Gen2x2) Type-C (1 I/O ) 5x USB 3.2 (Gen2) (3 I/O 2 ) 2x USB 3.2 (Gen1) (2 I/O ) 6x USB 2.0(2I/O4) 1x PCIe 5.0 x16 (x16 / x8 ) 1x PCIe 4.0 x4(x4) 1x PCIe 3.0 x1(x1) 2x WIFI 1x PS/2 / 1x HDMI (HDMI1.4) 1x DP (DP1.2) 1x BIOS Update Button 1x USB 3.2 (Gen2x2) Type-C 3x USB 3.2 (Gen2) Type-A 2x USB 3.2 (Gen1) Type-A 2x USB 2.0 Type-A 1x 2.5 Gigabit LAN 3x

»»

52 | APPENDIX I: Specifications in Other Languages

B650EGTQ

I/O
OS

4x SATA III(6Gb/s) 1x M.2 (E Key)2230 Wi-Fi & Bluetooth 2x USB 2.0(2USB 2.0) 1x USB 3.2 (Gen2)(2USB 3.2 (Gen2)) 1x 4 1x 8 1x 24 1x CPU 1x CPU(CPU_OPT) 3x 1x 1x 1x 2x CMOS 1x COM 1x TPM 2x LED(5V) 1x LED(12V) 1x IO LED 1x SB LED * M.2(E Key)
u-ATX244 mm x 244 mm
Windows 10(64bit) / Windows 11(64bit) /Windows 7(64) BIOSTAROS

APPENDIX I: Specifications in Other Languages | 53

FCC

B 15 (FCC). . , , , . , . , , – . , – . . , . .

Dichiarazione di conformità sintetica Ai sensi dell’art. 2 comma 3 del D.M. 275 del 30/10/2002 Si dichiara che questo prodotto è conforme alle normative vigenti e soddisfa i requisiti essenziali richiesti dalle direttive 2004/108/CE, 2006/95/CE e 1999/05/CE quando ad esso applicabili

, , 2004/108/, 2006/95/ 1999/05/, , .

FCC 1 1: 3
1.1 …………………………………………………………………………………………………… 3 1.2 ………………………………………………………………………………………………….. 3 1.3 ……………………………………………………………………………….. 4 1.4 ……………………………………………………………………………………… 6 1.5 …………………………………………………………………………. 7 2: 8 2.1 () ……………………………………………………………. 8 2.2 ………………………………………………………………………………………….. 9 2.3 ……………………………………………………….. 11 2.4 …………………………………………………………………………….. 12 2.5 ……………………………………………………………………………………………. 14 2.6 …………………………………………………………….. 16 2.7 …………………………………………………………………… 17 2.8 ……………………………………………………………………………………………………… 22 3: UEFI BIOS 23 3.1 UEFI BIOS………………………………………………………………………………………….. 23 3.2 BIOS ……………………………………………………………………………………………… 23 3.3 BIOS ……………………………………………………………….. 23 3.4 ……………………………………………………………………………….. 28 4: 38 4.1 ………………………………………………………………………………………….. 38 4.2 BIOS AMI ……………………………………………………………………………………… 39 4.3 POST- BIOS AMI…………………………………………………………………………………………….. 39 4.4 …………………………………………………………………. 41 4.5 RAID …………………………………………………………………………………………………… 42
2 |

1:

B650EGTQ

11
, . , , , :
· · . · ,
, , . · . , . · . , . · , , , . · 0 45C. · : ; ; , .
12
· Serial ATA ­ 4 . · ­ 1 . · DVD- ­ 1 .

»» , . .

1: | 3

13

USB

AM5 AMD® 7000 series RyzenTM (Raphael) AMD Ryzen BIOS www.biostar.com.tw
AMD B650E
AMD Ryzen 7000 series (Raphael) Processors: (Future CPUs): DDR5 4800/ 5200/ 5400(OC)/ 5600(OC)/ 6000+(OC) 4 DDR5 DIMM, . 128 DIMM DDR5 ECC 8/16/32
www.biostar.com.tw 4 SATA III (6Gb/s): AHCI RAID 0, 1, 10 — Total 3 M.2 4 SATA (6Gb/s) 1 M.2 (M Key) (M2M_CPU_1): SSD 2242/ 2260/ 2280 M.2 PCI-E 5.0 x4 (128Gb/s)/ 4.0 x4 (64Gb/s) ­ NVMe/ AHCI SSD 1 M.2 (M Key) (M2M_CPU_2): SSD 2280 M.2 PCI-E 5.0 x4 (128Gb/s)/ 4.0 x4 (64Gb/s) ­ NVMe/ AHCI SSD 1 M.2 (M Key) (M2M_SB): SSD 2280 M.2 PCI-E 4.0 x4 (64Gb/s) ­ NVMe/ AHCI SSD Realtek RTL8125B 10/ 100/ 1000/ 2500 / , -/ ALC1220 7.1, HD Audio ( ), Hi-Fi () 1 USB 3.2 (Gen2x2) Type-C (1 -) 5 USB 3.2 (Gen2) (3 – 2 ) 2 USB 3.2 (Gen1) (2 -) 6 USB 2.0 (2 – 4 ) 1 PCIe 5.0 x16 (x16 x8 ) 1 PCIe 4.0 x4 (x4 ) 1 PCIe 3.0 x1 (x1 ) 2 WIFI 1 / PS/2 1 BIOS Update Button 1 HDMI (HDMI1.4) 1 DP (DP1.2) 3 USB 3.2 (Gen2) Type-A 2 USB 3.2 (Gen1) Type-A 2 USB 2.0 Type-A 1 2.5 Gigabit LAN 3

»»

4 | 1:

B650EGTQ

4 SATA III (6.0Gb/s) 1 M.2 (E Key): Wi-Fi Bluetooth 2230 2 USB 2.0 ( 2 USB 2.0) 1 USB 3.2 (Gen2) ( 2 USB 3.2 (Gen2)) 1 4- 1 8- 1 24- 1 1 (CPU_OPT) 3 1 1 1 2 CMOS 1 1 TPM 2 (5 ) 1 (12 ) 1 IO 1 SB * Wi-Fi M.2 (E Key) .

u-ATX Form Factor, 244 mm x 244 mm

Windows 10(64bit)/ Windows 11(64bit) Biostar reserves the right to add or remove support for any OS with or without notice.

1: | 5

14
»» HDMI:4096×2160@30Hz,HDMI1.4. DP:4096×2160@60Hz,DP1.2
»» HD .
»» WiFiEKEYWiFiBluetooth.
6 | 1:

15

B650EGTQ

»» 1-. 1: | 7

2:
21 ()
1: . 2: .
3: .
8 | 2:

B650EGTQ 4: .
»» :,AM5.
22 < >
1: . . .
2: , , .
2: | 9

< > 1: . 2: , . . . »» . »» . . 10 | 2:

B650EGTQ
23
, . . CPU_FAN1/ CPU_OPT:

PWM Mode

DC Mode

Pin Assignment

Pin Assignment

1 Ground

1 Ground

2 +12V

2 Voltage Control

3 Sense

3 Sense

4 Speed Control Signal 4 NC

SYS_FAN1/ SYS_FAN2/ SYS_FAN3:

PWM Mode

DC Mode

Pin Assignment

Pin Assignment

1 Ground

1 Ground

2 +12V

2 Voltage Control

3 Sense

3 Sense

4 Speed Control Signal 4 NC

»» CPU_FAN1,CPU_OPT,SYS_FAN1/2/34-3- ., 2, ­1(GND).
»» (CPU_OPT): .

2: | 11

24 DDR4
1: DIMM, . DIMM , DIMM .
2: DIMM , DIMM .
» DIMM , . .
12 | 2:

B650EGTQ

DDR5_A1 DDR5_A2 DDR5_B1 DDR5_B2

DDR5 8 /16 /32 8 /16 /32 8 /16 /32 8 /16 /32

128 .

, : , .

Enabled Enabled

DDR5_A1 X O

DDR5_A2 O O

DDR5_B1 X O

DDR5_B2 O O

(O , X .)

»» .
»» DDR5_B2.

2: | 13

25
PCIEX16_1: PCI-Express Gen5 x16 (x16 x8 ) · PCI-Express 5.0. · PCIe 128 / .
PCIEX16_2: PCI-Express Gen4 · PCI-Express 4.0. · PCIe 64 / .
PCIEX1: PCI-Express Gen3 · PCI-Express 1.0. · PCIe 16 / .
M2M_CPU_1: M2 (M Key) · M.2 SSD 2242/2260/2280 M.2. · M.2 PCI Express Gen5 .0x4(128 /) ­ NVMe/AHCI SSD.
M2M_CPU_2: M2 (M Key) · M.2 SSD 2280 M.2. · M.2 PCI Express Gen5 .0x4(128 /) ­ NVMe/AHCI SSD.
M2M_SB: M2 (M Key) · M.2 SSD 2280 M.2. · M.2 PCI Express Gen4 .0x4(64 /) ­ NVMe/AHCI SSD.
14 | 2:

B650EGTQ

M2E-WIFI: M2 (Wi-Fi M2 (E Key) ) · M.2 (E Key). · Wi-Fi .
M2 COOLING
M.2 COOLING:

1: M.2 SSD, .

2: M.2 SSD M.2 .

3: M.2 SSD M.2 COOLING M.2 , .

Note
»» M.2COOLINGM.2 COOLING,M.2SSD.

2: | 15

26
, . , «», «».

1-2

JCMOS1: CMOS BIOS CMOS. , .
1-2 : ( ).
1-2 : CMOS.
CMOS: 1. . 2. « 1-2 »,
, . 3. . 4. CMOS ,
« 1-2 ». 5. . 6. CMOS.

16 | 2:

B650EGTQ

27

ATXPWR1: ATX 24- ATX. .

Pin Assignment 13 +3.3V 14 -12V 15 Ground 16 PS_ON 17 Ground 18 Ground 19 Ground 20 NC 21 +5V 22 +5V 23 +5V 24 Ground

Pin Assignment 1 +3.3V 2 +3.3V 3 Ground 4 +5V 5 Ground 6 +5V 7 Ground 8 PW_OK 9 Standby Voltage+5V 10 +12V 11 +12V 12 +3.3V

ATX_12V_2X4: ATX +12 . 4-, 1-2-5-6 ATXPWR2.
Pin Assignment 1 +12V 2 +12V 3 +12V 4 +12V 5 Ground 6 Ground 7 Ground 8 Ground

ATX_12V_2X2: ATX +12 .

Pin Assignment 1 +12V 2 +12V 3 Ground 4 Ground

»» ,ATX_12V_2X4 ATX_12V_2X4.
»» . .
2: | 17

F_PANEL: , , . .

Pin Assignment Function Pin Assignment

1 HDD LED(+) HDD 2 Power LED (+)

3 HDD LED(-) LED

4 Power LED (-)

5 Ground

Reset 6 Power Button

7 Reset Control Button 8 Ground

9 NC

NC

10 Key

Function
Power LED
Power-On Button Key

SPKR: .

Pin Assignment 1 +5V 2 N/A 3 N/A 4 Speaker

TPM_SPI: , .

Pin Assignment 1 +1.8V 3 TPM_RST# 5 N/A 7 +3.3V 9 SPI_CSI 11 SPI_DATAIN 13 SPI_I03

Pin Assignment 2 SPI_PIRQ 4 TPM_CS 6 SPI_I02 8 GND 10 SPI_CLK 12 SPI_DATAOUT 14 KEY

18 | 2:

SATA_1/ SATA_2/ SATA_3/ SATA_4: Serial ATA 6,0 / SATA SATA.

B650EGTQ

Pin Assignment 1 Ground 2 TX+ 3 TX4 Ground 5 RX6 RX+ 7 Ground

F_USB32_A-10G: USB 32 (Gen2) USB , .

Pin Assignment 1 VBUS0 2 SSRX13 SSRX1+ 4 Ground 5 SSTX16 SSTX1+ 7 Ground 8 D19 D1+ 10 ID

Pin Assignment 11 D2+ 12 D213 Ground 14 SSTX2+ 15 SSTX216 Ground 17 SSRX2+ 18 SSRX219 VBUS1 20 Key

F_USB20_1/ F_USB20_2: USB 20 USB , .
Pin Assignment 1 +5V (fused) 2 +5V (fused) 3 USB4 USB5 USB+ 6 USB+ 7 Ground 8 Ground 9 Key 10 NC

2: | 19

F_AUDIO: / , HD Audio ( ) AC’97.

HD Audio Pin 1 Mic Left in 2 Ground 3 Mic Right in 4 GPIO 5 Right line in 6 Jack Sense 7 Front Sense 8 Key 9 Left line in 10 Jack Sense

AC’97 Pin 1 Mic In 2 Ground 3 Mic Power 4 Audio Power 5 RT Line Out 6 RT Line Out 7 Reserved 8 Key 9 LFT Line Out 10 LFT Line Out

»» , .
»» «», AC’97. O.S.Audio.
COM: RS-232.
Pin Assignment 1 Carrier detect 2 Received data 3 Transmitted data 4 Data terminal ready 5 Signal ground 6 Data set ready 7 Request to send 8 Clear to send 9 Ring indicator 10 Key

20 | 2:

B650EGTQ
12V_LED: RGB (5050 SMD) 12 RGB RGB (5050 SMD).

Pin Cable Color Assignment

1 12V (Black) VCC12

2 G (Green) LED_GREEN

3 R (Red)

LED_RED

4 B (Blue)

LED_BLUE

5V_LED1/ 5V_LED2: RGB (WS2818B) 5 ARGB (WS2818B).

Pin Assignment 1 VCC5 2 Data 3 N/A 4 GND

»» ,, .
»» 12V_LED5050RGB 3(12).
»» 5V_LED300RGB WS2818B3(5).
»» VividLEDDJ.. 3.3.

2: | 21

28 Debug LED:
. DRAM – , DRAM . CPU – , . VGA – , . BOOT – , .
»» : DRAMCPUVGABOOT
»» ,, ,,.
»» Debug, .
RACING GT EVO. . 3.3.
RGB (5 /12 )
22 | 2:

B650EGTQ
3: UEFI BIOS
31 UEFI BIOS
· BIOS BIOS . BIOS , POST (. . Power-On Self-Test, ) .
· UEFI BIOS . UEFI BIOS
32 BIOS
BIOS : · BIOSTAR BIO-Flasher: BIOS , USB- (- USB-) -. · BIOSTAR BIOS Update: Windows. BIOS , USB- (- USB-), – .
33 BIOS
· BIOS USB-, : CREATIVE.ROM ( ). : B65AQ907.BST CREATIVE. ROM.
· ATX 24PIN , ( , )
· USB- : CREATIVE.ROM () USB- SMART BIOS
· BIOS 3-5 , , , .
3: UEFI BIOS | 23

BIOSTAR BIO-Flasher » FAT32/16
. » BIOS . BIOS BIOSTAR BIOS Flasher 1. -, BIOS . 2. BIOS – USB ( FAT/FAT32). 3. USB-, BIOS, USB-. 4. , POST. 5. POST BIOS-FLASHER. BIOS.
6. BIOS, , BIOS. «», BIOS.
7. BIOS . , .
24 | 3: UEFI BIOS

B650EGTQ 8. , , BIOS. BIOS <Save & Exit> ( ), ( ), ,

( ), . BIOS . BIOS Update ( ) 1. BIOS Update DVD-. 2. , . 3\. BIOS Update «Online Update» (-) 4\. BIOS Update. «», -. 5. BIOS, . «», . 6. , () BIOS . «», . 7. . «» . 3: UEFI BIOS | 25

8. , , BIOS. BIOS <Save & Exit> ( ), ( ), , <Save Changes> ( ) (), . BIOS . BIOS Update ( BIOS) 1. BIOS Update DVD-. 2. BIOS c – http://www.biostar.com.tw/ 3. BIOS Update «Update BIOS» ( BIOS) . 4. BIOS Update. «OK», . 5. BIOS . BIOS «Open» (). , .
6. BIOS Update «OK», .
26 | 3: UEFI BIOS

B650EGTQ 7. , , BIOS. BIOS <Save & Exit> ( ), ( ), ,

( >, . BIOS . BIOS «Backup BIOS» ( BIOS) BIOS BIOS «Save» (). 3: UEFI BIOS | 27

34
1. DVD- . , . 2. , . 3. , . . , . » , ,
. . » , , . . BIOScreen . BMP , .
, : · : . · : BIOS . · BIOS: BIOS, .
28 | 3: UEFI BIOS

B650EGTQ RACING GT EVO RACING GT EVO ­ , BIOSTAR . »» RACINGGTEVO
. »» . .
1 Clocks (): , . 2 Motherboard ( ): . 3 Processor (): . 4 Memory (): . »» ,.
3: UEFI BIOS | 29

SmartEAR Smart EAR (/ ) . . : 1. 2. 3. Windows 7 (32/64-)/8.1 (64-)/10 (64-) :

  1. , . 2. RACING GT EVO DVD-. 3. -. »» AC’97,
    «». O.S.Audio.
    1 : , , . 2 Mute ( ): . 3 Gain ( / ): . 30 | 3: UEFI BIOS

B650EGTQ GT Touch GT Touch , – RACING GT EVO Windows.
1 Normal ( ): . 2 ECO Mode (-): . 3 Sport ( ): .
3: UEFI BIOS | 31

Vivid LED DJ Vivid LED DJ ARMOR GEAR, RGB.
1 LED COMMANDER ( ): . · Default ( ): . ( ) · RGB Sync ( RGB):
« » 2 LED Type ( ): . · : . (Racing ARMOR) · 12 : 12 . ( 12V_LED) · 5 : 5 . ( 5V_LED) · : RGB. ( ) 3 /: VIVID LED. 4 /: . 5 Auto ( ): »» ,
. 6 LED SPARKLE ( ): . · Permanent (): . · Shine (): . · Breath (): . · Shine & Music ( ):
, . »» RACINGGTEVO,
. · Meteor (): «» . · Wave (): . 32 | 3: UEFI BIOS

B650EGTQ · Starry sky ( ): . · Lightning (): «» . · Rainbow (): . · Aurora (): . 7 / : .
8 : . 9 : . »» VIVIDLEDDJ
(LED SPARKLE­).
3: UEFI BIOS | 33

AI Fan A.I FAN , .
1 Temperature (): . 2 CPU FAN/ CPU OPT RPM & SYSTEM1/2/3 RPM ( CPU FAN/CPU OPT SYSTEM1/2/3): , . »» .. 3 Default ( ): , . 4 PWM/ Temperature Panel ( /): () , , . »» . 5 User Selection ( ): . · Auto ( ):
. · DC ( ): . · PWM (): – (). 6 Control Mode ( ): . · Quiet (): . · Aggressive (): . · Manual (): . · Full on (): . 34 | 3: UEFI BIOS

B650EGTQ , .
1 CPU Temperature/System Temperature/ MOS Temperature ( / / MOS ): Mos . 2 Fan (): . 3 Voltage (): . 4 : 12v, .
3: UEFI BIOS | 35

OC/OV <OC/OV> OC/OV, .
1 OC: . 2 OV: . 3 Default ( ): . 4 Apply (): . 5 Load (): . 6 Save (): . »» ;
. »» ­,;
. ,. .
36 | 3: UEFI BIOS

B650EGTQ « » Racing GT EVO.
3: UEFI BIOS | 37

4:
41
DVD- . , DVD-, .
. A Driver () , . . , . B Software ( ) , . , , , . C Manual () , DVD. «», . »» ,DVD-,
,SETUP.EXE. »» AcrobatReader,.
AcrobatReaderhttp://get.adobe.com/reader/ »» ,,.
. 38 | 4:

B650EGTQ

42 BIOS AMI

POST- BIOS

1 8

. ( )

43 POST- BIOS AMI

10 PEI Core

11

15

19

2B . Serial Presence Detect (SPD)

2C .

2D .

2E .

2F ().

31

32 POST

33 POST .

34 POST . () (AP)

35 POST . (BSP)

36 POST .

37 POST

3B POST ( )

4F DXE IPL

60 DXE Core

F0

, ( )

F1

, ( )

F2

F3

F4

E0 S3 Resume (S3 Resume PPI DXE IPL)

E1 S3

E2

E3 OS S3

60 DXE Core

61 NVRAM

62

63 DXE

68 – PCI

4: | 39

69 DXE 6A DXE SMM 70 71 DXE SMM 72 78 DXE ( ) 79 ACPI 90 (BDS) 91 92 PCI 93 PCI 94 PCI 95 PCI 96 PCI 97 98 99 Super IO 9A USB 9B USB 9C USB 9D USB A0 IDE A1 IDE A2 IDE A3 IDE A4 SCSI A5 SCSI A6 SCSI A7 SCSI A8 A9 AB AD AE AF B0 , MAP B1 , MAP B2 B3 B4 USB B5 PCI B6 NVRAM B7 ( NVRAM)
40 | 4:

B650EGTQ

44

1. .

1. ,

; .

2. .

2. .

3. .

. , , .

DIMM, , .

1. ,

. ,

, .

; CMOS. 2.

.

.

. , , .

1. . 2. . .

« » « CMOS».

. , .

1. /

.

,

2. SETUP

.

.

.

, , . , , . , : 1. . 2. . 3. . , . 1. . 2. . 3. .

: 1. CMOS. (. « CMOS: JCMOS1») 2. . 3. .

4: | 41

45 RAID RAID Definitions
RAID 0 , . ( 2) . , . : 2, 6 8. . · : , , , . · : , . . · : . – , . · : . · : ( ) x ( ) ( ), ( ). , , . RAID 1 2 . · : 2, 2. · : RAID 1 , . · : 100% . , . · : 2 . . · : .
42 | 4:

B650EGTQ RAID 10 ( ) RAID 0 RAID 1 . ( 3 4 ) . · : 4, 6 8, . · : , , . RAID . · : , RAID 1. · : .
4: | 43

FCC FCC15 Class B. . . . TV :
· . · . · . · . . . . . ( ).
BIOSTAR®BIOSTAR® . . BIOSTAR® , . 3 . 3 .
CE 2004/108/CE,2006/95/CE1999/05/CE .

. . . . .
KC (Korea) EMC . , . 1.(): KC . 2. : KC . 3. : BIOSTAR Microtech Int’l Corp KC . 4. : . 5./: .

B650EGTQ

1: 4 1.1 ………………………………………………………………………………………………………………..4 1.2 ……………………………………………………………………………………………………………4 1.3 ……………………………………………………………………………………………………………………………………..5 1.4 ………………………………………………………………………………………………………………7 1.5 ……………………………………………………………………………………………………………8
2: 9 2.1 CPU …………………………………………………………………………………………………………………………….9 2.2 CPU ………………………………………………………………………………………………………………..10 2.3 …………………………………………………………………………………………………………………… 12 2.4 ………………………………………………………………………………………………………..13 2.5 …………………………………………………………………………………………………………………………15 2.6 & ……………………………………………………………………………………………………….17 2.7 & ………………………………………………………………………………………………………………..18 2.8 LEDs ………………………………………………………………………………………………………………………………….23
3: UEFI & 24 3.1 UEFI ………………………………………………………………………………………………………..24 3.2 …………………………………………………………………………………………………………24 3.3 BIOS ……………………………………………………………………………………………….24 3.4 ………………………………………………………………………………………………………………………29
4: 39 4.1 …………………………………………………………………………………………………………………39 4.2 AMI ………………………………………………………………………………………………40 4.3 AMI …………………………………………………………………………………………..40 4.4 …………………………………………………………………………………………………………………………42 4.5 RAID ………………………………………………………………………………………………………………………..44

| 3

1:
11
,.
· . · . · ,
. · .
. ·
. . · ,
. · 0 45 . · :
/
12
· ATA x4 · x1 · DVD x1
» . .
4 | 1:

B650EGTQ

13

CPU

AM5 AMD® 7000 series RyzenTM BIOS AMD Ryzen * www.biostar.com.tw .

AMD B650E

AMD Ryzen 7000 series Processors:

DDR5 4800/ 5200/ 5400(OC)/ 5600(OC)/ 6000+(OC) 128GB 4x DDR5 DIMM DIMM non-ECC 8/ 16/ 32GB DDR5 * www.biostar.com.tw .

4x SATA III (6Gb/s): AHCI & RAID 0, 1, 10

— 3 M.2 4 SATA III (6Gb/s) 1x M.2 (M Key) (M2M_CPU_1): M.2 2242/ 2260/ 2280 SSD PCI-E 5.0 x4 (128Gb/s)/ 4.0 x4 (64Gb/s) – NVMe/ AHCI SSD 1x M.2 (M Key) (M2M_CPU_2): M.2 2280 SSD PCI-E 5.0 x4 (128Gb/s)/ 4.0 x4 (64Gb/s) – NVMe/ AHCI SSD 1x M.2 (M Key) (M2M_SB): M.2 2280 SSD PCI-E 4.0 x4 (64Gb/s) – NVMe/ AHCI SSD

LAN

Realtek RTL8125B 10/ 100/ 1000/ 2500 Mb/s , /

ALC1220 7.1 , HD , Hi-Fi()

1x USB 3.2(2×2 ) -C ( / 1 )

USB

5x USB 3.2(2 ) ( / 3 2 ) 2x USB 3.2(1 ) ( / 2 )

6x USB 2.0 ( / 2 4)

1x PCIe 5.0 x16 (x16 x8 ) 1x PCIe 4.0 x4 (x4 ) 1x PCIe 3.0 x1 (x1 )

/

2x 1x PS/2 & 1x BIOS Update Button 1x HDMI (HDMI1.4) 1x DP (DP1.2) 1x USB 3.2(2×2) -C 3x USB 3.2(2) -A 2x USB 3.2(1) -A 2x USB 2.0 -A 1x 2.5G LAN 3x

»

1: | 5

/
OS

4x SATA III (6Gb/s) 1x M.2 (E Key) : 2230 Wi-Fi Bluetooth 2x USB 2.0 ( 2 USB 2.0 ) 1x USB 3.2(2) ( 2 USB 3.2(2) ) 1x 4-Pin 1x 8-Pin 1x 24-Pin 1x CPU 1x CPU (CPU_OPT) 3x 1x 1x 1x 2x CMOS 1x COM 1x TPM 2x LED (5V) 1x LED (12V) 1x IO LED 1x SB LED M.2 (E Key) Wi-Fi
u-ATX , 244 mm x 244 mm
Windows 10(64)/ Windows 11(64)
OS .

6 | 1:

14

B650EGTQ

» HDMI: 4096 x 2160 @30Hz (HDMI 1.4). DP: 4096 x 2160@60Hz (DP 1.2).
» HD . » WiFi E KEY WiFi .

1: | 7

15
» . 8 | 1:

2:
21 CPU
1: CPU .

B650EGTQ

2: Open Lever and then load plate using finger tab.

3: Align and seat processor package on socket.

2: | 9

4: Rotate lever and press lever finger, then locked the position.
» Ensure that you install the correct CPU designed for AM5 socket.
22 CPU
1: . .
2: . .
10 | 2:

B650EGTQ 1: .
2: CPU CPU . .
» CPU . » CPU .
2: | 11

23
. .
CPU_FAN1/ CPU_OPT: CPU

PWM Mode 1 Ground 2 +12V 3 Sense 4 Speed Control Signal

DC Mode 1 Ground 2 Voltage Control 3 Sense 4 NC

SYS_FAN1/ SYS_FAN2/ SYS_FAN3/ SYS_FAN4:

PWM Mode 1 Ground 2 +12V 3 Sense 4 Speed Control Signal

DC Mode 1 Ground 2 Voltage Control 3 Sense 4 NC

» CPU_FAN1, CPU_OPT, SYS_FAN1/ 2/ 3/ 4 4-pin3-pin . , (+) #2 . #1(GND) .
» CPU (OPT_FAN1): CPU .

12 | 2:

24 DDR5

B650EGTQ

1: , DIMM . .
2: , .
» . .
2: | 13

DIMM DDR5_A1 DDR5_A2 DDR5_B1 DDR5_B2

DDR4 8GB/16GB/32GB 8GB/16GB/32GB 8GB/16GB/32GB 8GB/16GB/32GB

128GB.

:

(2 .

DDR5_A1 DDR5_A2 DDR5_B1 DDR5_B2

X

O

X

O

O

O

O

O

(O , X .)

» 1 , , .
» DDR5_B2 .

14 | 2:

25

B650EGTQ

PCIEX16_1: PCI-Express 5 x16 (x16 x8 ) · PCI-Express 5.0 . · PCIe 128GB/s.
PCIEX16_2: PCI-Express Gen4 · PCI-Express 4.0 . · PCIe 64GB/s.
PCIEX1: PCI-Express Gen3 · PCI-Express 1.0 . · PCIe 64GB/s.
M2M_CPU_1: M2 (M Key) · M.2 M.2 2242/2260/2280 SSD . · M.2 PCI-E 5.0×4 (128Gb/s) – NVMe/ AHCI SSD .
M2M_CPU_2: M2 (M Key) · M.2 M.2 2280 SSD . · M.2 PCI-E 5.0×4 (128Gb/s) – NVMe/ AHCI SSD .
M2M_SB: M2 (M Key) · M.2 M.2 2280 SSD . · M.2 PCI-E 4.0×4 (64Gb/s) – NVMe/ AHCI SSD .

2: | 15

M2E-WIFI: M2 (E Key) (M2 (E Key) Wi-Fi ) · M.2 (E Key) . · WiFi/ Bluetooth .
M2COOLING M.2 COOLING :

1:

2:

M.2 SSD M.2 M.2 SSD

2 ,

.

.

3: M.2 SSD , M.2 M.2 COOLING . .

» M.2 COOLING , M.2 SSD M.2 COOLING .

16 | 2:

B650EGTQ

26 &

.

” “, ” “.

Pin opened

Pin closed

Pin 1-2 closed

JCMOS1: CMOS CMOS . .
1-2 : ()
1-2 : CMOS
CMOS : 1. AC . 2. ” 1-2 ” ,
. 3. 5 . 4. CMOS ” 1-2 ” . 5. AC . 6. CMOS .

2: | 17

27 &

ATXPWR1: ATX , 24- . .

13 +3.3V 14 -12V 15 16 PS_ON 17 18 19 20 NC 21 +5V 22 +5V 23 +5V 24

1 +3.3V 2 +3.3V 3 4 +5V 5 6 +5V 7 8 PW_OK 9 +5V 10 +12V 11 +12V 12 +3.3V

ATX_12V_2X4: ATX CPU +12V . CPU 4 , ATXPWR2 1-2-5-6 .

1 +12V 2 +12V 3 +12V 4 +12V 5 6 7 8

ATX_12V_2X2: ATX CPU +12V .

1 +12V 2 +12V 3 4

» , ATX_12V_2X4 ATX_12V_2X2 .
» . .
18 | 2:

B650EGTQ

F_PANEL: 10 -, , HDD LED, LED, .

1

HDD LED(+)

3

HDD LED(-)

5 Ground

Reset 7 Control 9 NC

2

LED

4

6
8

Power LED (+) Power LED (-) Power Button
Ground

NC

10 Key

LED
Key

SPKR: .

1 +5V 2 N/A 3 N/A 4 Speaker

TPM_SPI: .

1 +1.8V 3 TPM_RST# 5 N/A 7 +3.3V 9 SPI_CSI 11 SPI_DATAIN 13 SPI_I03

2 SPI_PIRQ 4 TPM_CS 6 SPI_I02 8 GND 10 SPI_CLK 12 SPI_DATAOUT 14 KEY

2: | 19

SATA_1/ SATA_2/ SATA_3/ SATA_4: ATA SATA SATA .
1 Ground 2 TX+ 3 TX4 Ground 5 RX6 RX+ 7 Ground

F_USB32_A-10G: USB 32(2) PC USB , .

1 VBUS0 2 SSRX13 SSRX1+ 4 Ground 5 SSTX16 SSTX1+ 7 Ground 8 D19 D1+ 10 ID

11 D2+ 12 D213 Ground 14 SSTX2+ 15 SSTX216 Ground 17 SSRX2+ 18 SSRX219 VBUS1 20 Key

F_USB20_1/ F_USB20_2: USB 20 PC USB , .

1 +5V (fused) 2 +5V (fused) 3 USB4 USB5 USB+ 6 USB+ 7 Ground 8 Ground 9 Key 10 NC

20 | 2:

B650EGTQ

F_AUDIO: HD AC’97
/ .

HD Audio 1 Mic Left in 2 Ground 3 Mic Right in 4 GPIO 5 Right line in 6 Jack Sense 7 Front Sense 8 Key 9 Left line in 10 Jack Sense

AC’97 1 Mic In 2 Ground 3 Mic Power 4 Audio Power 5 RT Line Out 6 RT Line Out 7 Reserved 8 Key 9 LFT Line Out 10 LFT Line Out

» HD HD .
» AC’97 , ” ” O.S .
COM: 1 RS-232 .
1 2 3 4 5 # 6 7 # 8 # 9 10 Key

2: | 21

12V_LED: RGB LED (5050 SMD) RGB LED (5050 SMD) 12V RGB .

1 12V (Black) VCC12

2 G (Green) LED_GREEN

3 R (Red)

LED_RED

4 B (Blue)

LED_BLUE

5V_LED1/ 5V_LED2: Addressable RGB LED (WS2818B) ARGB LED (WS2818B) 5V .
1 VCC5 2 Data 3 N/A 4 GND

» LED . LED .
» 12V_LED 3A (12V) 5050 RGB LED . » 5V_LED 300 LED WS2818B
RGB LED 3A (5V). » Vivid LED DJ LED .
3.3 .

22 | 2:

B650EGTQ
28 LEDs Debug LED: LED
LED . DRAM – DRAM . CPU – CPU . VGA – GPU . BOOT – .
» LED . DRAM CPU VGA BOOT
» LED .
» LED .
LEDs LED RACING GT EVO . 3.3 .
RGB LED (5V/12V)
2: | 23

3: UEFI &
31 UEFI
· . POST .
· UEFI UEFI .
32
: · BIOSTAR BIO-Flasher: , , USB ( USB ) CD-ROM . · BIOSTAR BIOS UPDATE UTILITY: . , , USB ( USB ) CD-ROM, .
33 BIOS
· CREATIVE.ROM . : B65AQ907.BST CREATIVE.ROM BIOS ATX 24PIN AC ( ).
· CREATIVE.ROM USB () . BIOS USB
· BIOS 3~5 LED LED .
24 | 3: UEFI &

BIOSTAR BIO-Flasher

B650EGTQ

» FAT32/16 . » PC , .
BIOSTAR BIO-Flasher 1. . 2. USB () . ( FAT/FAT32 ) 3. USB USB . 4. , POST.

5. POST – . .

6. , . “Yes” .
7. . .
8. , , . , <Save & Exit> – , . <Save Changes and Reset> , .
3: UEFI & | 25

( ) 1. DVD . 2. .
3. , ” (Online Update)” .
4. , , “Yes” .
5. , , “Yes” .
6. , , “Yes” .
7. , , “OK” .
8. , , . , <Save & Exit> – , .

, . ( ) 1. DVD . 2. http://www.biostar.com.tw/app/kr/support/download.php . 26 | 3: UEFI &

B650EGTQ
3. , ” (Update BIOS)” .
4. , , “OK” .
5. , “(Open)” . , .
6. , , “OK” . 7. , , . , <Save & Exit> – , . <Save Changes and Reset> , .
3: UEFI & | 27

. “(Save)” .
28 | 3: UEFI &

B650EGTQ
34
1. DVD , .
2. , . 3. , . , . – . » .
, . » ,
. (BIOScreen Utility) . BMP .
: · : . · : , . · : , .
3: UEFI & | 29

RACING GT EVO RACING GT EVO , , . » RACING GT EVO
. » . .
1 (Clocks): , , . 2 (Motherboard): . 3 (Processor): CPU . 4 (Memory): . » .
30 | 3: UEFI &

B650EGTQ (SmartEAR) (Smart EAR) , (/ ) , . . : 1. 2. 3. 7 (32/64) / 8.1(64 ) / 10(64 ) : 1.
. 2. DVD RACING GT EVO . 3. /
. » AC’97 , ” ”
. O.S .
1 : (knob) , . 2 : . 3 / : (low) , (high) .
3: UEFI & | 31

GT (GT Touch) GT (GT Touch) RACING GT EVO , , , .
1 (Normal Mode): . 2 (ECO Mode):
. 3 (Sport Mode): .
32 | 3: UEFI &

B650EGTQ LED DJ(Vivid LED DJ) LED DJ RGB LED ARMOR GEAR .
1. LED: LED . · Default: . () · RGB (RGB Sync): LED . 2 LED : LED . · (System): LED (ARMOR GEAR) · 12 LED(12V LED Header): 12V LED. (12V_LED ) · 5 LED(5V LED Header): 5V LED . (5V_LED ) · (Memory Sync): RGB LED . ( LED) 3 ON/OFF: VIVID LED . 4 ON/OFF: VIVID LED . 5 (Auto): LED LED . » , LED . 6 LED (LED SPARKLE): LED . · (Permanent): LED(On) . · (Shine): . · L (Breath): . · (Shine & Music):
. » RACING GT EVO ,
. · (Meteor): LED . · (Wave): . · (Starry sky): LED .
3: UEFI & | 33

· (Lightning): LED . · (Rainbow): LED . · (Aurora): LED . 7 / (High/Low Speed Switch): .
8 LED (LED Brightness Bar): LED . 9 (Color Palette): LED . » VIVID LED DJ 4 LED
. (LED SPARKLE).
34 | 3: UEFI &

B650EGTQ AI Fan A.I FAN , .
1 (Temperature): CPU . 2 CPU FAN/ CPU OPT RPM & SYSTEM1/2/3 RPM: CPU . » . 3 (Default): . 4 PWM/ (PWM/Temperature Panel): CPU PWM . » . 5 (User Selection): . · Auto: . · DC: (DC) . · PWM: PWM . 6 (Control Mode): . · Quiet: . · Aggressive: . · Manual: . · Full on: .
3: UEFI & | 35

H/W HW , , .
1 CPU / / MOS (CPU /System /MOS Temperature): CPU MOS . 2 Fan: . 3 (Voltage): CPU . 4 (Current): PSU( ) 12V, CPU , CPU GT .
36 | 3: UEFI &

B650EGTQ OC/OV OC/OV (OC)/(OV) , .
1 (OC): . 2 (OV): . 3 (Default): . 4 (Apply): . 5 (Load): . 6 (Save): . » CPU ;
CPU . » , ;
. , / . .
3: UEFI & | 37

About About .
38 | 3: UEFI &

4:

B650EGTQ

41
, DVD . DVD .

. A , . , . . B , . . . C , DVD . / .
» DVD , SETUP.EXE .
» .
http://get.adobe.com/reader .
» . .
4: | 39

42 AMI

Continuing

POST

1 8

( )

43 AMI

10 11 15 19 2B 2C 2D 2E 2F 31 32 33 34 35 36 37 3B 4F 60 F0 F1 F2 F3 F4 E0 E1 E2 E3 60 61 62 63 68 69 6A

PEI CPU . (SPD) . . . (). CPU CPU . CPU . (AP) CPU . (BSP) CPU . (SMM) ( ) DXE IPL DXE ( ) ( ) S3 Resume (S3 Resume PPI, DXE IPL ) S3 OS S3 DXE NVRAM CPU DXE PCI DXE DXE SMM

40 | 4:

70 71 72 78 79 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AB AD AE AF B0 B1 B2 B3 B4 B5 B6 B7

DXE DXE SMM DXE ( ) ACPI (BDS) PCI PCI PCI PCI PCI IO USB USB USB USB IDE IDE IDE IDE SCSI SCSI SCSI SCSI MAP MAP ROM USB PCI NVRAM (NVRAM )

B650EGTQ

4: | 41

44

1. . LED ; .
2. .

1. .
2. . 3. .

. , , .

, .

1. ,

. CMOS

,

.

. 2.

,

.

, , . .

1. .
2. , .

” ” “CMOS ” .

. .

.

1. / .
2. . .

42 | 4:

B650EGTQ CPU CPU . CPU , CPU , . , : 1. CPU CPU . 2. CPU . 3. CPU CPU . , CPU . 1. . 2. . 3. . : 1. CMOS . (“CMOS : JCMOS1”
) 2. . 3. .
4: | 43

45 RAID
RAID
RAID 0 . ( 2 ) , I/O . .
· : 2, 6-8 . · : , . · : , , . · : . , . · : . · : (. HDD ) x ( HDD )
( ) ( ) . , . RAID 1 2 .
· : 2 ­ 2. · : RAID 1 . · : 100% . , . · : 2 , 100 . · : .
RAID 10 RAID 0 RAID 1 ( ) ( 3 4) .
44 | 4:

B650EGTQ
· : 4, 6 8. · : , .
RAID , . · : RAID 1 . · :
4: | 45

FCC FCC15Class B ( )
· · · · / ()
BIOSTAR®BIOSTAR® BIOSTAR®
CE 2004/108/CE 2006/95/CE 1999/05/CE

: 3 1.1 …………………………………………………………………………………………………………………………….. 3 1.2 ……………………………………………………………………………………………………………………… 3 1.3 ……………………………………………………………………………………………………………………… 4 1.4 ……………………………………………………………………………………………………………… 6 1.5 …………………………………………………………………………………………………………………. 7
: 8 2.1 (CPU)……………………………………………………………………………………………………….. 8 2.2 …………………………………………………………………………………………………………………………. 9 2.3 ……………………………………………………………………………………………………………………. 11 2.4 ……………………………………………………………………………………………………………….. 12 2.5 ……………………………………………………………………………………………………………………. 14 2.6 ……………………………………………………………………………………………………………………. 16 2.7 ……………………………………………………………………………………………………………….. 17 2.8 LED ………………………………………………………………………………………………………………………… 22
: UEFI BIOS 23 3.1 UEFI BIOS …………………………………………………………………………………………………………. 23 3.2 BIOS…………………………………………………………………………………………………………………… 23 3.3 BIOS…………………………………………………………………………………………………………… 23 3.4 …………………………………………………………………………………………………………………………… 28
: 38 4.1 …………………………………………………………………………………………….. 38 4.2 AMI BIOS ……………………………………………………………………………………………… 39 4.3 AMI BIOS ………………………………………………………………………………………….. 39 4.4 ……………………………………………………………………………………………………………………. 41 4.5 RAID …………………………………………………………………………………………………………………. 42
44
2 |

:

B650EGTQ

11
· · · · · · · 0-45 ·
12
· Serial ATA x4 · x1 · x1 ()

»

: | 3

13

CPU

USB

AM5AMD® RyzenTM 7000 series BIOSAMD® RyzenTM www.biostar.com.tw CPU
AMD B650E
AMD Ryzen 7000 series Processors: DDR5 4800/ 5200/ 5400(OC)/ 5600(OC)/ 6000+(OC) 4x DDR5 DIMM128GB DIMMnon-ECC 8/ 16/ 32 GB DDR5
www.biostar.com.tw
6x SATA III (6Gb/s) : AHCI & RAID 0110 — 4x M.2 6x SATA III(6Gb/s) 1x M.2 (M Key) (M2M_CPU_1): M.2 Type 2242/ 2260/ 2280 SSD PCI-E 5.0 x4 (128Gb/s)/ 4.0 x4 (64Gb/s)- NVMe/ AHCI SSD 1x M.2 (M Key) (M2M_CPU_2): M.2 Type 2280 SSD PCI-E 5.0 x4 (128Gb/s)/ 4.0 x4 (64Gb/s)- NVMe/ AHCI SSD 1x M.2 (M Key) (M2M_SB): M.2 Type 2280 SSD PCI-E 4.0 x4 (64Gb/s)/ – NVMe/ AHCI SSD
Realtek 8125B 10/ 100/ 1000/ 2500 Mb/s /
ALC1220 7.1Hi-Fi()
1x USB 3.2(Gen2x2)Type-C ( 1 ) 5x USB 3.2(Gen2) ( 3 2 ) 2x USB 3.2(Gen1) ( 2 ) 6x USB 2.0(2 4)
1x PCIe 5.0 x16 (x16 x8 ) 1x PCIe 4.0 x4 (x4) 1x PCIe 3.0 x1 (x1)
2x WIFI 1x PS/2 / 1x BIOS Update Button 1x HDMI (HDMI1.4) 1x DP (DP1.2) 1x USB3.2 (Gen2x2)Type-C 3x USB3.2 (Gen2)Type-A 2x USB3.2 (Gen1)Type-A 2x USB2.0 Type-A 1x LAN 3x

4 | :

4x SATA III (6Gb/s) 1x M.2 (E Key) : 2230,Wi-Fi/ Bluetooth 2x USB2.0(2USB2.0) 1x USB3.2(Gen2)(2USB3.2(Gen2)) 1x (4-pin) 1x (8-pin) 1x (24-pin) 1x CPU 1x CPU(CPU_OPT) 3x 1x 1x 1x 2x CMOS 1x 1x TPM 2x LED(5V) 1x LED(12V) 1x IO LED 1x SB LED M.2 (E Key) Wi-Fi
u-ATX 244 mm x 244 mm
Windows 10(64bit)/ Windows 11(64bit)
OSBiostar

B650EGTQ

: | 5

14
» HDMI: 4096 x 2160@30HzHDMI 1.4 DP: 4096 x 2160@60HzDP 1.2
» HD/ » WiFiE KEYWiFi
6 | :

15

B650EGTQ

» 1

: | 7

:
21 (CPU)
1: CPU 2: 2:
3:
8 | :

4:

B650EGTQ

» CPUAM5
22
1:

2:

: | 9

1: 2: CPUCPU
» CPU » CPU
10 | :

B650EGTQ
23
CPU_FAN1/ CPU_OPT: CPU

PWM

1

2 +12V

3 Sense

4

Speed Control Signal

DC 1 2 Voltage Control 3 Sense
4 NC

SYS_FAN1/ SYS_FAN2/ SYS_FAN3:

PWM

1

2 +12V

3 Sense

4

Speed Control Signal

DC 1 2 Voltage Control 3 Sense
4 NC

» CPU_FAN1CPU_OPTSYS_FAN1/ 2/343
» CPU(OPT_FAN1)CPU

: | 11

24 DDR5
1: DIMM DIMMDIMM 2: DIMMDIMM
» DIMM 12 | :

B650EGTQ

DIMM DDR5_A1 DDR5_A2 DDR5_B1 DDR5_B2

DDR4 8GB/16GB/32GB 8GB/16GB/32GB 8GB/16GB/32GB 8GB/16GB/32GB

128GB.

DDR5_A1 DDR5_A2 DDR5_B1 DDR5_B2

Enabled

X

O

X

O

Enabled

O

O

O

O

(“O””X “)

» » DDR5_B2

: | 13

25
PCIEX16_1: PCI-Express Gen5 x16 (x16x8) · PCI-Express 5.0 · 128GB/s
PCIEX16_2: PCI-Express Gen4 · PCI-Express 4.0 · 64GB/s
PCIEX1: PCI-Express Gen3 · PCI-Express 1.0 · 16GB/s
M2M_CPU_1: M2 (M Key) · M.22242/2260/2280SSD · PCI-E 5.0 x4 (128Gb/s) – NVMe/ AHCI SSD
M2M_CPU_2: M2 (M Key) · M.22280SSD · PCI-E 5.0 x4 (128Gb/s) – NVMe/ AHCI SSD
M2M_SB: M2 (M Key) · M.22280SSD · PCI-E 4.0 x4 (64Gb/s) – NVMe/ AHCI SSD
14 | :

B650EGTQ

M2E-WIFI: M2 (E Key) (M2 (E Key) Wi-Fi) · M.2 (E Key) · WiFiBluetooth
M2 COOLING M.2 COOLING

1

2

3

M.2 SSD M.2 SSDM.2 M.2 SSD

M.2 COOLING

M.2

» M.2COOLING M.2 COOLING M.2 SSD

: | 15

26

(close) (open)

1-2

JCMOS1: CMOS CMOSBIOS
1-2 : ()
1-2 : CMOS
CMOS: 1. AC 2. 1-2
1-2 3. 5 4. CMOS1-2 5. AC 6. BIOS

16 | :

B650EGTQ

27

ATXPWR1: ATX ATX24-pin

13 +3.3V 14 -12V 15 16 PS_ON 17 18 19 20 NC 21 +5V 22 +5V 23 +5V 24

1 +3.3V 2 +3.3V 3 4 +5V 5 6 +5V 7 8 PW_OK 9 +5V 10 +12V 11 +12V 12 +3.3V

ATX_12V_2X4: ATX CPU+12VCPU4ATXPWR2 1-2-5-6
1 +12V 2 +12V 3 +12V 4 +12V 5 6 7 8

ATX_12V_2X2: ATX CPU +12V

1 +12V 2 +12V 3 4

» ATX_12V_2X4ATX_12V_2X2 »

: | 17

F_PANEL: 10

1 HDD LED(+) 2 Power LED (+)

3 HDD LED(-) 4 Power LED (-)

5

6

7

8

9 NC

NC

10 Key

Key

SPKR: 4

1 +5V 2 N/A 3 N/A 4

TPM_SPI: TPM

1 +1.8V

2 SPI_PIRQ

3 TPM_RST# 4 TPM_CS

5 N/A

6 SPI_I02

7 +3.3V

8

9 SPI_CSI

10 SPI_CLK

11 SPI_DATAIN 12 SPI_DATAOUT

13 SPI_I03

14 KEY

18 | :

SATA_1/ SATA_2/ SATA_3/ SATA_4: Serial ATA 60 Gb/s SATASATA

B650EGTQ

1 2 TX+ 3 TX4 5 RX6 RX+ 7

F_USB32_A-10G: USB 32(Gen2) PCUSB

1 VBUS0 2 SSRX13 SSRX1+ 4 5 SSTX16 SSTX1+ 7 8 D19 D1+ 10 ID

11 D2+ 12 D213 14 SSTX2+ 15 SSTX216 17 SSRX2+ 18 SSRX219 VBUS1 20 Key

F_USB20_1/ F_USB20_2: USB 20 PCUSB
1 +5V (fused) 2 +5V (fused) 3 USB4 USB5 USB+ 6 USB+ 7 8 9 Key 10 NC

: | 19

F_AUDIO: HD()AC’97

HD Audio 1 Mic Left in 2 3 Mic Right in 4 GPIO 5 Right line in 6 Jack Sense 7 Front Sense 8 Key 9 Left line in 10 Jack Sense

AC’97 1 Mic In 2 3 Mic Power 4 Audio Power 5 RT Line Out 6 RT Line Out 7 Reserved 8 Key 9 LFT Line Out 10 LFT Line Out

» HD/ » » AC’97″”

COM: RS-232

1 2 3 4 5 6 7 8 9 10 Key

20 | :

B650EGTQ 12V_LED: RGB LED (5050 SMD) 12VRGBRGB LED(5050 SMD)
1 12V () VCC12 2 G () LED_GREEN 3 R () LED_RED 4 B () LED_BLUE
5V_LED1/ 5V_LED2: Addressable RGB LED (WS2818B) 5VARGB LED (WS2818B)
1 VCC5 2 3 N/A 4
» LEDLED » 12V_LED5050 RGB LED3A12V » 5V_LED300LED WS2818B Addressable RGB LED
3A (5V) » Vivid LED DJLED 3.3
: | 21

28 LED
Debug LED: LED LED

DRAM – DRAM CPU – CPU VGA – GPU BOOT –

» LED DRAM CPU VGA
» LED » Debug LED
LED LED RACING GT EVO 3.3

RGB LED (5V/12V)

22 | :

: UEFI BIOS

B650EGTQ

31 UEFI BIOS
· BIOSBIOS BIOS
· UEFI BIOSUEFI BIOS
32 BIOS
BIOS: · BIOSTAR BIO-Flasher: BIOSUSB CD-ROM · BIOSTAR BIOS: Windows BIOS USBCD-ROM
33 BIOS
· bios,biosCREATIVE.ROM · () : B65AQ907.BSTCREATIVE.ROM · ATX 24PIN,ac(,power on) · CREATIVE.ROM

· BIOS3~5,LED,LED,, (32m4~6)

: UEFI BIOS | 23

BIOSTAR BIO-Flasher » FAT32/16 » BIOS BIOSTAR BIO-FlasherBIOS 1. BIOS 2. BIOSUSB(FAT/FAT32) 3. BIOSUSBUSB 4. 5. (POST) BIO-FLASHER BIOS
6. BIOS”Yes” BIOS
7. BIOS
8. BIOS BIOS BIOS 24 | : UEFI BIOS

BIOS 1. DVDBIOS Update Utility 2. 3. BIOS”Online
Update”

B650EGTQ

4. BIOS “Yes”BIOS
5. BIOS “Yes”
6. BIOS “Yes”
7. “OK”
8. BIOS BIOS BIOS

: UEFI BIOS | 25

BIOSBIOS 1. DVDBIOS 2. www.biostar.com.tw BIOS. 3. BIOS Update Utility
“Update BIOS” 4. BIOS
“OK”BIOS 5. BIOS
BIOS”Open” BIOS 6. BIOS”OK”
7. BIOS BIOS BIOS
26 | : UEFI BIOS

BIOS BIOS “Save”

B650EGTQ

: UEFI BIOS | 27

34
1. Autorun 2. Software Installation 3. » » BIOScreen BMP
· (Load Image) · (Transform) · BIOS(Update Bios)BIOS
28 | : UEFI BIOS

B650EGTQ RACING GT EVO Utility RACING GT EVO » RACING GT EVO »
(System information)
1 (Clocks) 2 (Motherboard) 3 (Processor) 4 (Memory)
: UEFI BIOS | 29

(Smart EAR) / 1. 2. 3. Windows 7 (32/64bit)/ 8.1(64bit) /10(64bit) 1. 2. DVDRACING GT EVO 3. RACING » AC’97″”

1 (Volume) 2 (Mute) 3 (Gain)LO HI 30 | : UEFI BIOS

B650EGTQ (GT Touch) GT TouchWindowsRACING GT EVOECO
1 (Normal) 2 (ECO) 3 (Sport)
: UEFI BIOS | 31

LEDARMOR GEARRGB LED
1 LED(LED COMMANDER)LED · () · RGBLED 2 LEDLED · LED(Racing ARMOR) · 12V LED12V LEDLED(12V_ LED) · 5V LED5V LEDLED(5V_LED) · LED() 3 /LED 4 /LED 5 LED » LED 6 LEDLED · LED · LED · LED · LED » RACING GT EVO · LED · LED · LED · LED · LED · LED 7 / 32 | : UEFI BIOS

B650EGTQ
8 LEDLED 9 LED » VIVID LED DJLEDLED

: UEFI BIOS | 33

(AI Fan) A.I FAN
1 (Temperature)CPU 2 CPU FAN/ CPU OPT RPM & SYSTEM1/2/3 RPM
CPU » 3 Default 4 PWM/Temperature Panel
PWMCPU » 5 (User Selection) · (Auto) · DC · PWMPWM 6 (Control Mode) · (Quiet) · (Aggressive) · (Manual) · (Full on) 34 | : UEFI BIOS

(H/W Monitor)

B650EGTQ

1 / / MOS (CPU/System/ MOS Temperature) CPU MOS
2 3 CPU 4 PSU 12V ,CPU CPU GT

: UEFI BIOS | 35

(OC/OV)
1 (OC) 2 (OV) 3 Default 4 (Apply) 5 (Load) 6 (Save) » CPUCPU » ;

36 | : UEFI BIOS

(About) Racing GT EVO Utility

B650EGTQ

: UEFI BIOS | 37

:
41
DVD
A Driver B Software C Manual » DVD
SETUP.EXE » Acrobat Readermanualhttp://get.adobe.com/reader/
Acrobat Reader »
38 | :

42 AMI BIOS

BIOS

1 8

()

43 AMI BIOS

10 11 15 19 2B 2C 2D 2E 2F 31 32
33
34 35 36
37
3B 4F 60 F0 F1 F2 F3 F4 E0 E1 E2 E3 60 61 62 63 68 69 6A

PEI CPU Pre-memory Pre-memory Pre-memory SPD Memory presence CPU post-memory CPU post-memoryCache CPU post-memoryAP CPU post-memoryBSP CPU post-memorySMM Post-Memory Post-Memory DXE IPL DXE BIOS() BIOS() S3 S3 S3 DXE NVRAM CPU DXE PCI HB DXE DXE SMM

B650EGTQ : | 39

70 71 72 78 79 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AB AD AE AF B0 B1 B2 B3 B4 B5 B6 B7

DXE DXE SMM DXE ACPI BDS PCI PCI PCI PCI PCI IO USB USB USB USB IDE IDE IDE IDE SCSI SCSI SCSI SCSI ROM USB PCI NVRAM (NVRAM)

»

40 | :

B650EGTQ

44

1. 2. 3.

1. CMOS
2.

1. 2.

“Invalid Configuration” “CMOS Failure”

1. / 2.

CPU CPUCPU CPU 1. CPU CPU 2. CPU 3. CPUCPU

CPU 1. 2. 3.

: 1. CMOS(“Close CMOS Header: JCMOS1” ) 2. 3.

: | 41

45 RAID RAID
RAID 0 Block/ · : 268 · : RAID 0 · : · : . · : (RAID 1)2 RAID 1 RAID1 RAID · : 22 · : RAID 1 · : 100% · : 2 · :
42 | :

B650EGTQ RAID 10RAID 0/ RAID 1 · : 468 · : RAID · : RAID1 · :
: | 43

PCB

Pb O

Hg O

Cd

Cr(VI)

O

O

PBB
O

PBDE
O

O

O

O

O

O

O

X

O

O

O

O

O

X

O

O

O

O

O

X

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O SJ/T11363-2006 X SJ/T11363-2006 PbXPb SJ/T11363-2006ROHS

44 |

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals