Leica 1966 Calonox Sight 2 LRF User Guide
- May 15, 2024
- Leica
Table of Contents
CALONOX 2 SIGHT
CALONOX 2 SIGHT – LRF
QUICK START GUIDE
1966 Calonox Sight 2 LRF
DOWNLOAD INSTRUCTIONSleica-camera.com/Service-Support
FOREWORD
Dear Customer,
we wish you a great deal of enjoyment and every success with your new Leica
product. Please read the long form manual before using the product for the
first time. Knowledge of the content will prevent inadvertent damage to the
product, possible injuries and other risks. Download the full scope
instruction manual here: https://leica-camera.com/downloads
LEGAL INFORMATION
CE MARK
The CE mark on our products documents compliance with the fundamental
requirements of applicable EU guidelines.
Declaration of Conformity (DoC)
“Leica Camera AG” hereby declares that this product is in compliance with the
basic requirements and other relevant provisions of Directive 2014/53/EU.
Customers can download a copy of the original DoC for our Radio Equipment
products from our DoC server: www.cert.leica-camera.com
Please contact Leica Camera AG, Am Leitz-Park 5, 35578 Wetzlar, Germany in
case of any further questions
Depending on product (see technical data)
Type| Frequency band (center frequency)| Maximum output (dBm
E.I.R.P.)
---|---|---
WLAN| 2400-2484 MHz| 20
Bluetooth® Wireless Technology| 2402–2480MHz| 10
Authorized representative in United Kingdom:
LEICA CAMERA LIMITED
6-8 James Street,
London, UK, W1U 1ED
English (UK only)
Declaration of Conformity (DoC)
Hereby, “Leica Camera AG” declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive “The Radio
Equipment Regulations 2017”.
Customers can download a copy of the original DoC to our Radio Equipment
products from our DoC server:
www.cert.leica–camera.com
In case of further questions, please contact: Leica Camera AG, Am Leitz–Park
5, 35578 Wetzlar, Germany
TECHNICAL DATA (LASER)
Laser class | IEC/EN Class 1 |
---|---|
Wavelength (nm) | 905 |
Output (mW) | 0.832 mW |
Beam divergence (mrad) | 8 mrad x 4 mrad |
Conforms to 21 CFR 1040.10 and 1040.11 except for conformance to IEC 60825-1 Ed. 3 as described in Laser Notice No. 56, May 8, 2019.
DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT
**** (Applies within the EU and for other European countries with active
waste separation policies.)
This device contains electrical and/or electronic components which must not be
disposed of in general household waste. Instead, it should be disposed of at a
recycling collection point provided by your local authority. This service is
free of charge. Any standard or rechargeable batteries used in this device
must be removed and disposed of separately in accordance with local
regulations. Please contact your local authorities, waste disposal collection
point or the retailer, from whom you purchased the device for more information
on correct waste disposal.
REGULATORY INFORMATION
You will find the manufacturing date of your product on the stickers of the
packaging. The date format is year/month/day.
▸ Enter the main menu by press and hold the menu button
▸ Go down in the main menu with the “arrow down” button to the point
“Settings”
▸ Activate Settings sub-menu by pressing menu button
▸ Go down in the Setting menu with the “arrow down” button to the point “Info”
▸ Enter the Info page with pressing the menu button
SAFETY REMARKS
WARNING
Non-compliance with the following points may result in serious injury or
death.
LASER
- The use of any operations not described in this manual or any alterations on the device may result in hazardous radiation exposure.
- The laser device is active and emitting an invisible laser beam as long as the display in the eyepiece is active. Never point the laser focusing optics at a person or animal.
- Do not press any function button while aiming at a human eye or while looking into the optics from the lens side.
- Never aim the laser at an eye.
- Do not aim the laser at people or animals.
GENERAL INFORMATION
- Avoid looking directly at bright light sources with your Leica Calonox 2 to prevent eye injury.
CAUTION
Non-compliance with the following points may result in personal injury or
damage to the device.
LASER
- Avoid touching the function button while the distance measurement function is not in use to prevent an accidental activation of the laser beam.
- Do not attempt to disassemble, reassemble or repair Leica Calonox 2 yourself. Emitting laser radiation may pose a serious health risk. The manufacturer warranty is void, once a device was disassembled, reassembled or repaired.
- Stop using the device immediately if the device housing is damaged or the device emits a strange sound after a fall, or behaves unexpectedly for any other reason.
GENERAL INFORMATION
- Keep the device out of the reach of small children.
- Do not use the device while walking. You might trip and fall.
- Do not attempt to disassemble or modify the device; exposing the internal electronics may cause damage, injury or electric shock.
RECHARGEABLE BATTERY
- New batteries must be charged before initial use to be ready for activation in the device. A full charge is recommended, as the batteries are delivered in an only partially charged state.
- Never throw batteries into a fire as they may explode.
- Keep the battery away from sources of heat in case of leakage or if you smell burning. Leaked fluid can catch fire!
- Make sure that the power socket is freely accessible at all times.
SENSOR
• Cosmic radiation (e.g. during flights) may cause pixel defects.
Wi-Fi/BLUETOOTH®
-
Wirelessly transmitted data (images) may be intercepted by third parties. The safety of data transmitted via wireless networks cannot be guaranteed.
-
Do not use the device in areas where it may be exposed to magnetic fields, static electricity, or radio frequency interference (RFI).
-
Do not use the transmitter in the immediate vicinity of microwave ovens or other devices, where the reception of wireless signals may be disrupted by magnetic fields, static electricity, or RFI.
Other wireless devices operating in the 2.4 GHz band in the vicinity of the device may cause mutual interference. -
The Bluetooth transmitter operates in the 2.4 GHz frequency band. The standard output strength is approx. 3.16 mW.
IMPORTANT INFORMATION
GENERAL INFORMATION
- Do not attempt to take the device apart yourself. Repairs must only be carried out by authorized workshops.
- Low temperatures impair battery performance. Carry the device close to the body in cold conditions and use a fresh battery.
- Do not touch the glass surfaces with your fingers, especially if you have previously applied hand cream, insect repellent, etc. These substances may contain chemicals that damage or destroy the coatings on the glass surfaces.
- When used as a hand-held device, a carrying strap should generally be used to prevent possible damage to the device from falling.
MEASURING VALUES
- Regardless of whether this information is used, you are responsible for assessing the relevant hunting situation.
- Powerful electric fields, e.g. emanating from radar systems, may cause errors and/or faulty values.
- The geomagnetic field can similarly cause value deviations.
TERMS OF GUARANTEE OF LEICA CAMERA AG
Dear Leica Customer,
congratulations on the purchase of your new Leica product – you are now the
proud owner of a world-class brand product.
In addition to your statutory warranty claims against your seller, we, Leica
Camera AG (“LEICA”), grant you voluntary warranty services for your Leica
product in accordance with the following stipulations (“Leica Warranty”). The
Leica warranty therefore does not limit your statutory rights as a consumer
under applicable law or your rights as a consumer against the dealer with whom
you have concluded the purchase contract.
THE LEICA-GUARANTEE
You have purchased a Leica product that has been manufactured according to
special quality guidelines and tested by experienced specialists during the
various stages of production. We provide the following Leica Warranty, valid
as of April 1, 2023, for this Leica product and including the accessory parts
in the original packaging. Please note that we do not offer any warranty for
commercial use.
We offer an extended warranty for some Leica products, provided you register
for a Leica account. Please visit www.leica-camera.com for more details.
SCOPE OF THE LEICA-GUARANTEE
During the warranty period, complaints based on manufacturing and material
defects will be remedied free of charge, at LEICA’s discretion, by way of
repair, replacement of defective parts, or exchange for a similar Leica
product in perfect condition. Replaced parts or products become the property
of LEICA.
Further claims of any kind and on any legal grounds whatsoever in connection
with this Leica Warranty are excluded.
EXCLUDED FROM THE LEICA WARRANTY
Parts subject to wear and tear (e.g. eyecups, leather coverings, carrying
straps, armoring, batteries), and parts under mechanical stress are excluded
from the Leica Warranty, unless the defect was caused by manufacturing or
material defects. That also applies to any exterior damage.
LAPSE OF CLAIMS UNDER THE LEICA-GUARANTEE
Claims under the warranty are void if the defect in question is due to
improper handling; they may also be void if e.g. third-party accessories have
been used, the Leica product has not been opened professionally or has not
been repaired professionally. Claims for warranty services shall similarly be
void if the serial number is unrecognizable.
ASSERTION OF THE LEICA-GUARANTEE
We require a copy of the proof of purchase of your Leica product from a LEICA-
authorized dealer (“Authorized Leica Dealer”) before we can accept any claim
under the warranty. The purchase receipt must show the date of purchase, the
Leica product with its article number and serial number, and details about the
Authorized Leica Dealer. We reserve the right to request the original receipt.
Alternatively, you may send us a copy of the warranty card; please note that
the Warranty Card must be filled out correctly, and the product must have been
purchased from an Authorized Leica Dealer. Please send your Leica product with
a copy of your purchase receipt or the Warranty Card alongside a description
of the issue.
Leica Camera AG, Customer Care, Am Leitz-Park 5, 35578 Wetzlar, Germany
Email:customer.care@leica-camera.com, phone: +49(0)6441 2080-189
Leica Product Sport Lenses| Warranty Term Lenses/Mechanics|
Warranty Term Electronics
---|---|---
Thermal Imaging Cameras| 3 years| 3 years
PART DESIGNATIONS
1. Front lens
2. Focus ring
Focusing to the relevant distance
3. Eyecup
Prevents lateral light incidence
4. Eyepiece
5. Mode selector
a Index point
b Modes
b Power ON/OFF
6. Function button
Activation of distance measurement (LRF model only)
7. [▸] button
– Menu navigation
– BrightnessBrightness| 8. [▸] button
Toggling between PhotoPhoto/VideoVideo mode
9. Menu Selection Button
– Accessing the menus
– Storing of settings
10. Strap lugs
11. Tripod thread
M5 standard thread
12. Tripod thread
A 1⁄4 DIN 4503 (1⁄4”)
13. USB-C port
– Data transfer
– Charging the battery
14. Laser transmission lens
---|---
Note
- The device will not automatically power down.
ATTACHING THE CARRY STRAP
DISPLAYS
OBSERVATION MODE| EXAMPLE: QUICK ACCESS-MENU
---|---
LIST MENU| LIST MENU (CONTINUED)
- Battery capacity
- Magnification
- Quick access menu item
- Menu section
- Current menu item
TECHNICAL DATA
Designation| L e i c a C a l o n
o x S i g ht 2| L e i c a C
a l o n o x S i g ht 2 LRF
---|---|---
Device type| Thermal imaging device| Thermal imaging device
Type No.| 1966| 1986
Order No.| 50511| 50510
Scope of delivery| Calonox Sight 2, cordura case, charging cable, carrying
strap, quick start guide, lens cleaning cloth, rub-ber eyecup, Flip Cap,
certificate| Calonox Sight 2 LRF, cordura case, charging cable, carrying
strap, quick start guide, lens cleaning cloth, rub-ber eyecup, Flip Cap,
certificate
Sensor type| VOx| VOx
Sensor size| 640 x 480 pixels| 640 x 480 pixels
Pixel size| 12 µm| 12 µm
Screen type| OLED| OLED
Screen diagonal| 0.49″, active area 0.35″| 0.49″, active area 0.35″
Screen resolution| 1280 x 960 pixels| 1280 x 960 pixels
Image repetition frequency| 60 Hz| 60 Hz
Lens focal length| 42 mm| 42 mm
Optical basic magnification| 1x| 1x
Field of view| 10.3° x 7.7° (18 m x 13.5 m/100 m)| 10.3° x 7.7° (18 m x 13.5
m/100 m)
Range/Resolution (calculated for image subject 1.7 m x 0.5 m)
Detection range / Resolution| 2210 m/2 pixels| 2210 m/2 pixels
Recognition range / Resolution| 770 m/6 pixels| 770 m/6 pixels
Identification range / Resolution| 390 m/12 pixels| 390 m/12 pixels
Laser| –| Invisible, safe for eyes in compliance with EN and FDA Class 1
Wavelength| –| 905 nm
Range| –| high-reflection targets: 1200 m low-reflection targets: 500 m
Video output| Wi-Fi, USB| Wi-Fi, USB
Video recording| yes| yes
Video/Picture resolution| 640 x 480 pixels| 640 x 480 pixels
Cable socket| USB-C| USB-C
Wireless connection| Bluetooth®/Wi-Fi (2.4 GHz)| Bluetooth®/Wi-Fi (2.4 GHz)
Internal memory| 32 GB| 32 GB
IPX5| IP67| IP67
Operating temperature| -20°C to +50°C| -20°C to +50°C
Operating temperature (charge battery)| +10 to +30°C| +10 to +30°C
Battery life| approx. 7.5 h| approx. 6 h
Accessory thread| M43 x 0.75| M43 x 0.75
Tripod thread| A ¼ DIN 4503 (¼”), M5 standard thread| A ¼ DIN 4503 (¼”), M5
standard thread
Material| Composite with silicone armoring| Composite with silicone armoring
Dimensions (WxHxD)| 139 x 89 x 61.5 mm| 139 x 109 x 61.5 mm
Weight (with battery)| 590 g| 650 g
Made in Germany
All rights reserved. Subject to changes in design, production, and scope of
delivery.
This product complies with the performance standards for laser products as specified in 21 CFR 1040.10 and 1040.11, except for the features approved by Variance Number IEC 60825-1 Ed. 3 effective 08/05/2019.
Leica Calonox models come with splash water protection coating (IP67).
The device was tested under controlled laboratory conditions and is classed as
IP67 in accordance with DIN EN 60529.
Please note: the protection coating is not permanent and will diminish
over time. The warranty does not cover liquid damage. Any attempt to open the
device by an unauthorized retailer or service partner will result in the
immediate expiration of the warranty.
The switching adapter output when charging the camera battery depends on its
operating mode. A min. switching adapter output of 3 W is required when the
camera is switched off. An output of 15 W is required if the camera is
switched on.
USB-PD capable
FOR US ONLY:
FCC Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interfer ence in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
To assure continued compliance, follow the attached installation instructions
and use only shielded inter face cables with ferrite core when connecting to
comput er or peripheral devices. Any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate this equipment.
Trade Name: | LEICA |
---|---|
Type No. | 1986 |
Responsible party/ Support contact: | Leica Camera Inc. |
500 Frank W. Burr Blvd., Suite 570, Teaneck, NJ 07666
Tel.: +1 800 222 0118
Type No.: 1986
**** Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Contains FCC ID: VPYLB1DX
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter. This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment and meets the FCC
radio frequency (RF) Exposure Guidelines.
The available scientific evidence does not show that any health problems are
associated with using low power wireless devices. There is no proof, however,
that these low power wireless devices are absolutely safe. Low power Wireless
devices emit low levels of radio frequency energy (RF) in the microwave range
while being used. Whereas high levels of RF can produce health effects (by
heating tissue), exposure of low- level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low- level RF
exposures have not found any biological effects. Some studies have suggested
that some biological effects might occur, but such findings have not been
confirmed by additional research. Model 1986 has been tested and found to
comply with FCC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines.
Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC
60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019.
FOR CANADA ONLY:
CAN ICES-003 (B)/NMB-003(B)
CONTAINS IC: 772C-LB1DX
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low- level RF that does not produce heating effects causes no known adverse health effects. Many studies of low- level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules.
FOR US AND CANADA ONLY
FOR US ONLY:
FCC Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interfer ence in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
To assure continued compliance, follow the attached installation instructions
and use only shielded inter face cables with ferrite core when connecting to
comput er or peripheral devices. Any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate this equipment.
Trade Name: | LEICA |
---|---|
Type No. | 1966 |
Responsible party/ Support contact: | Leica Camera Inc. |
500 Frank W. Burr Blvd., Suite 570, Teaneck, NJ 07666
Tel.: +1 800 222 0118
Type No.: 1966
**** Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Contains FCC ID: VPYLB1DX
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter. This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment and meets the FCC
radio frequency (RF) Exposure Guidelines.
This equipment has very low levels of RF energy that are deemed to comply
without testing of specific absorption ratio (SAR).
Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC
60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019.
FOR CANADA ONLY:
CAN ICES-003 (B)/NMB-003(B)
CONTAINS IC: 72C-LB1DX
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low- level RF that does not produce heating effects causes no known adverse health effects. Many studies of low- level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules.
FOR US AND CANADA ONLY
439-299.001-009 XI/2023
References
- Leica Camera Wetzlar Germany – Official | UK
- Downloads | Leica Camera US
- Leica Camera Wetzlar Germany – Official | International
- Downloads | Leica Camera US
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>