ELVITE EHL200S Over Ear Headphones User Manual

ELVITE EHL200S Over Ear Headphones

Thank you for your trust and the purchase of our product. Make sure you have received an undamaged product. If you do find transport damage, please contact the seller from which you purchased the product, or the regional warehouse from which it was supplied.

OVERVIEW

• A. On/Off
• B. Play
• C. Pause
• D. Answer a call
• E. End a call
• F. Increase volume
• G. Forward
• H. Decrease volume
• I. Backward
• J. Microphone
• K. LED indicator for pairing, power on/off
• L. Line in (3.5 mm jack)
• M. Noise-canceling
• N. LED indicator for charging
• O. Charging port
• P. USB charging cable

SAFETY

Carefully read the instructions before you install and use the product. Save the instructions and keep them near the product for future reference. All kinds of warranties shall be invalid if these instructions are not followed. The model code is printed on the product.

DANGER!

• This product contains a lithium battery. If misused, opened, or damaged, it can become a hazard and may explode.
• Do not attempt to burn the headphones. The battery could explode causing injury and death.

WARNING!

• Do not attempt to perform maintenance or repairs on this product by yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Contact the manufacturer or the nearest authorized service center.
• Do not spill liquids on the product. Clean only with a dry cloth.
• Place the product on a solid surface.
• Do not leave the product near any heat sources, such as radiators, heat registers, stoves, or other appliances that produce heat.
• Protect the power cord from being walked on or pinched, especially near the plugs and where it exits the product.

WARNING!

• During lightning storms or if the product is unused for long periods of time, unplug the product from the power source. This will prevent lightning and power-line surge damage to the product.
• Do not overload wall outlets, extension cords, or integral power circuits as this can result in a risk of fire or electric shock.
• Never push any object into the product’s openings, as this can result in fire, electric shock, or damage.
• When charging, use proper power sources and plug the product into a certified USB power output, as described in the operating instructions or as marked on the product.

DANGER!

• This product contains a lithium-ion battery. If misused, opened, or damaged, it can become a hazard and may explode.

WARNING!

• Dispose of the used battery according to your local waste disposal authority.

The European Directive for Batteries 2006/66/EC states that it is not permitted to throw away batteries with household waste. They may contain substances that are harmful to the environment. Empty batteries can be handed over to a local, public collection point or a local recycling centre.

Dispose of packaging in an environmentally friendly manner. Recycling packaging, while observing national and local regulations, can reduce the consumption of raw materials and the amount of waste in landfill sites.This product complies with international directives, including but not limited to the WEEE Directive (2012/19/EU). The symbol on the product or on its packaging indicates that this product should not be treated as household waste. Consult your local waste disposal authority for guidance on how to properly recycle or dispose of this product. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of the product. For more detailed information about recycling this product, please contact the relevant municipal body in charge of waste management, your household waste disposal service, or the store where you purchased the product

USING HEADPHONES

Turn on and pair headphones

1. Press and hold the power button for 3-5 seconds. The LED starts flashing blue and white alternatively and the voice prompt says POWER ON. The headphones start pairing automatically, and the voice prompt says PAIRING.
2. Go to BLUETOOTH® settings on your device and select EHL200S to pair with your headphones. The voice prompt says CONNECTED and the headphones are now paired with your device.

Turn off headphones

1.  Press and hold the power button for 3 seconds. The voice prompt says POWER OFF.

Charge headphones
Fully charge the headphones before using them for the first time.

1. Turn off the headphones.
2. Connect the charging cable to a USB port.
   • The LED turns red and turns off when charging is complete

TECHNICAL SPECIFICATIONS

• Driver Ø 40mm
• Bluetooth version 5.0
• Bluetooth chipset BES2300YP
• Bluetooth 2.402-2.480 GHz
• Transmit power +8 dBm
• Charging time 2 Hours
• Working range 10 m
• Impedance 32 Ω
• Frequency response 20 Hz – 20 kHz
• Noise cancelling max 35 dB
• Noise cancelling average 25 dB
• Battery capacity 500mah
• Standby time 250 hours
• Total playtime 40 hours

Declaration of conformity

This product fulfills the essential requirements and other relevant provisions of Directive 2014/53/EU and all other EU directive requirements and carries the CE mark. If not included with the product, a copy of the EU Declaration of Conformity is available on request. This product has been evaluated to meet general RF exposure requirements. It can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>