VEVOR TZJ-01-01 Truck Bed Extender Instruction Manual

VEVOR TZJ-01-01 Truck Bed Extender

INSTRUCTION MANUAL

Technical Support and E-Warranty Certificate www.vevor.com/support

TRUCK BED EXTENDER
MODEL:TZJ-01-01/TZJ-01-02

We continue to be committed to provide you tools with competitive price.

“Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

MODEL:TZJ-01-01/TZJ-01-02

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

CustomerService@vevor.com

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

Warning-To reduce the risk of injury, user must read instructions manual carefully.

SAVE THIS MANUAL

Tundra,Nissan Titan,Chevrolet Silverado,GMC Sierra

ASSEMBLY PREPARATION

When unpacking this product, check to make sure parts listed below are included and carefully inspect for any damage that may have occurred during transit. If any part is missing and damaged, do not attempt to assemble or use the product.

PRODUCT ASSEMBLY EXPLODED

1. Assembly Procedures

2. Installation Procedures

Strap Latch Insert supplied in 3 diameter sizes, you can choose to properly fit your tailgate latch.

When the Bed Extender is at the furthest rear position. Push down on the buckle to insert into tailgate latch.Tighten straps.To release, pull tailgate handle.

NOTE: Ensure that buckles are properly inserted into latches by puling on the straps after bothe buckles have been inserted.

BED EXTENDER OPERATION

• With the tailgate open, place Bed Extender pivot pins into the left and right mounting brackets.Rotate to 45 until it drops into place,then lower onto the open tailgate.
• Flip Bed Extender out to contain cargo in the truck bed when the tailgate is open.CUTION: 200lb maximum load on open tailgate.Always distribute cargo evenly and properly secure inside bed. Do not secure cargo to the Bed Extender or the tailgate.
• Before driving, secure Bed Extender by locking the provided strap buckles into the truck’s tailgate latches. To release, pull tailgate handle. NOTE: Ensure that both buckles are properly locked into the latches by pulling up on each strap.
• Flip Bed Extender forward and close the tailgate to keep smaller cargo safe and organized.

Product Specifications

• Model Range: TZJ-01-01/TZJ-01-02

• Net Weight: 6kg (TZJ-01-01) / 6.2kg
  (TZJ-01-02)

• Material: Aluminum, Plastic

• Color: Black

• Fitment(TZJ-01-01): Ridgeline, Tacoma,
  Gladiator, Colorado/Canyon, Frontier, Ranger, Ford SuperDuty, F150,
  Dodge Ram 1500/2500/3500, Toyota

• Fitment(TZJ-01-02): Tundra, Nissan Titan, Chevrolet Silverado, GMC Sierra

Technical Support and E-Warranty Certificate www.vevor.com/support

Frequently Asked Questions (FAQ)

Q: How do I contact technical support or inquire about the warranty?

A: For technical support or warranty inquiries, you can contact CustomerService@vevor.com.

Q: What should I do if a part is missing or damaged when unpacking the

product?

A: If any part is missing or damaged, do not attempt to assemble or use the product. Contact customer support for assistance.

References

• Contact Us – Official VEVOR Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>