JMK F06 Circulating Fan Instruction Manual

June 6, 2024
JMK

JMK F06 Circulating Fan Instruction Manual
JMK F06 Circulating Fan

Feature

Feature

  1. Removable Protective Net
  2. Removable Aromatherapy w Cover
  3. Temperature Display
  4. Night light Mode Adjustment
  5. Turn On Or Off / Speed GSM’ Adjustment / Cycle Mode
  6. USB Charging Port
  7. Suspended Base
  8. Night Light
  9. Charging Indicator

Exterior Size

Exterior Size

Basic Configuration

 Product Model
F06 Cocular Fan

 Gear
4 Speed Gear

 Charging Time
6-8h

 Display Function
Gear Room Temperature

 Charging Input
5V/1A

 Usage Time
3-1 .12h

 Product Weight
670g

 Decibel Value
40-50DB

 Power Consumption
5W

 Battery Specifications
6000mah

 Control Method
Touch Control

 Executive Standard
GB4706 1-2006
GB4706274006
GB/T5262-2016

Step For Usage

Step For Usage

  • Open the box and take out the circulating fan from the box.
  • Connect the circulating fan to a USB charger for charging. The red indicator light is always on when charging, and the indicator light turns green when fully charged.
  • Manually adjust the flip circulation fan to a proper angle (Adjustable to 90”).

Perating Description

Perating Description

The touch button operation is as follows:

  • Long press (Figure 1) with your finger position to turn on/off the fan mode, click again to adjust the fan 1/2/314 gear (click and touch frequency interval 0.5 seconds), double click to turn on/off the fan rotation cycle mode (5 seconds after power on The real-time temperature is displayed by default without using the touch button)
  • Long press (Figure 2) finger position to turn on/off night light mode, click again (Figure 2) finger position to adjust light brightness (dick and touch frequency interval 0.5 seconds). double click (Figure 2) finger position to adjust light mode (L1/L2) /L3/L4), there are four lighting modes: cool white/warm white/warm white/breathing light.

Protective Net Removal

Protective Net Removal

  •  Turn the fan to 90 and unscrew the screws on the back of (Figure 1).
  • Then turn the protective net (Figure 2) clockwise to a buckle position.
  • Finally. the protective net can be disassembled and cleaned with water.
    Aromatherapy Cover Disassemble

Aromatherapy Cover Disassemble

Cover Disassemble

Rotate the aromatherapy cover counterclockwise to remove the aromatherapy cover (the product does not contain aromatherapy)

Warranty Card

Username__
Contact Number_
Product Name___

Dealer (Signature):____

Purchase Date___

Installation Address___

This product has been stnctly inspected before leaving the factory to ensure that its quality meets venous standards.

Maintenanos Records:Repair Date| Maintenance Project| Maintenance Organization| Repairer’s Signature
---|---|---|---
 |  |  |
 |  |  |
 |  |  |
 |  |  |

Not:

  1. Please keep this card properly. and contact the after-sales service center with the warranty card and purchase invoice when ropers are needed.
  2. The company guarantees 1 year for the F06 circulating fan purchased by the user, and the repair content includes. tan. control panel. etc. (except for Alter consumables. norml fan clearing and maintenance in the later parted)
  3. The company’s warranty card is orgy for use rt China (excludng Hong Kong. Macao, and Taiwan).
  4. The warranty card shall not be snored or forged.

1 .Android. Apple scan code to download and install APP.

2 torn on the tan, turn on the phone’s Bluetooth tan to automatically connect with the phone.
3 Open the APP to enter the operation page The operation instructions are as 10110WS:
Instructions

  • Marquee Mode
  • Breathing Light
  • Cold Light Mode
  • Warm And Cold Light Mode
  • Warm Light Mode
  • Timing
  • Tentative
  • Circulating Fan
  • Turn Off Circulating Fan

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals