ECTIVE 3000W Portable Power Station Instructions
- September 28, 2024
- ECTIVE
Table of Contents
3000W Portable Power Station
“`html
Product Overview & Technical Specifications
-
Product: ECTIVE MSP SunGrid
-
Rated Power: 72 W
-
Rated Voltage UMPP: 20 V
-
Rated Current IMPP: 3.6 A
-
Weight: 2.4 kg
-
Number of Cells: 72
-
Operating Temperature Range: Not
specified -
Connector Protection: IP65
-
Connections: XT30, USB-A, USB-C
Product Usage Instructions
Safety Instructions
- Read all safety instructions before installation and use.
- Do not use if damaged or not functioning properly.
- Avoid touching contacts or exposed wires.
- Protect from water and external damage.
- Ensure proper cable connections to avoid short circuits.
Connection Guide
The ECTIVE SunGrid transmits solar power to a solar charge
controller via the XT30 connection. You can also use the USB ports
to power small devices like smartphones or cameras.
Set-Up Instructions
Attach the solar module using the eyelets in the corners for
flexible mounting options. You can use suction cups to quickly
mount the panel on your vehicle for optimal positioning based on
sunlight availability.
FAQ
Q: Can I disassemble the solar module for repair?
A: No, do not attempt to disassemble or repair the solar module.
Contact customer service for assistance with any problems or
defects.
“`
Portable Solar Modules
SunGrid MSP
Operating Instructions
Table of Contents
Welcome!…………………………………………………………………………………………………………………………… 1 Scope of Delivery
……………………………………………………………………………………………………………….. 1 Safety Instructions
…………………………………………………………………………………………………………….. 2 Product Overview & Technical
Specifications ………………………………………………………………………. 2 Operating Instructions
……………………………………………………………………………………………………….. 4 Cleaning and
Maintenance………………………………………………………………………………………………….. 5
Troubleshooting…………………………………………………………………………………………………………………. 5 The SunGrid in
the ECTIVE Eco System……………………………………………………………………………….. 6 Service and
Complaints………………………………………………………………………………………………………. 8 Disposal
…………………………………………………………………………………………………………………………….. 9 Stay in Touch!
…………………………………………………………………………………………………………………….. 10
Ready to get ECTIVE!
Quick-Start Guide
1. Familiarize yourself with the Safety Instructions on page 2. 2. Connect and operate your ECTIVE SunGrid solar panel accoriding to the instructions on page 4. 3. Use efficient, free and sustainable solar power to supply your electrical devices with energy!
Welcome!
Hi, nice to meet you! Ready to get ECTIVE?
Thank you for choosing a solar module from ECTIVE`s SunGrid series! ECTIVE
SunGrid panels are extremely light and powerful solar modules that can be
folded up to the size of an A4 sheet of paper. This makes them ideal for
festivals, wall camping or as a compact solar module for behind the
windscreen. Please read these instructions carefully before using the solar
module. Please also read and follow the operating instructions in the manuals
for all devices that you wish to use with this solar module, such as solar
charge controllers, inverters with integrated MPPT charge controllers or all-
in-one solutions such as the ECTIVE BlackBox or ECTIVE AccuBox.
Scope of Delivery
Solar modules from the ECTIVE SunGrid series are supplied with practical
accessories that make them easy and safe to use. Please check that the scope
of delivery is complete before installation and commissioning:
1 × ECTIVE SunGrid Lightweight, foldable solar panel with high efficiency and
integrated USB ports.
1 × Carrying Bag Robust and stylish carrying bag for storing the ECTIVE
SunGrid including cables.
2 × Connection Cables (XT30 to MC4 / Anderson Small to MC4) Thanks to the
included cables, you can connect the SunGrid module directly to your ECTIVE
BlackBox or ECTIVE AccuBox, or connect it to another suitable device.
ECTIVE MSP SunGrid 1
Safety Instructions
Read the following safety instructions carefully before installing and using
your ECTIVE SunGrid. Also follow the operating instructions for any devices
that you use with the ECTIVE SunGrid. This includes solar charge controllers,
inverters with integrated MPPT charge controllers or all-in-one solutions such
as the ECTIVE BlackBox or ECTIVE AccuBox.
Do not use the ECTIVE SunGrid if the solar module, cable or a connected device
is damaged or does not function properly.
Do not touch any contacts of the connections and, in the event of damage, do
not touch any exposed wires or metallic components.
The connections of the ECTIVE SunGrid are dustproof to IP65 and protected
against light splash water. No water may penetrate a connected charge
controller or other connected electrical devices.
Protect the surface of the solar module from sharp objects, direct heat
sources, acids and other external influences that could damage the surface of
the solar module.
Ensure that all cables are connected correctly and securely. Avoid short
circuits and ensure that all requirements for cable cross-sections and fuses
are met. Read the operating instructions for the connected devices.
ECTIVE SunGrid solar modules do not contain any components that can be
serviced by the user. Do not disassemble the solar module or attempt to repair
it. In the event of problems or defects, please contact our customer service.
Product Overview & Technical Specifications
Useful Connections The ECTIVE SunGrid transmits the solar power generated to a
solar charge controller via the XT30 connection. This can either be a stand-
alone device, such as the ECTIVE SC 20 Silent, or a charge controller that is
installed in another device, such as an ECTIVE SSI inverter or an ECTIVE
BlackBox or AccuBox. Two USB ports (USB-A and USB-C) supply small consumers
such as smartphones or cameras directly with power.
2 ECTIVE MSP SunGrid
Rated power (Wp) Rated voltage UMPP (V) Rated current IMPP (A) Power tolerance Open-circuit voltage UoC Short-circuit current Isc Dimensions Dimensions (folded) Weight Number of cells Cell efficiency Power/temperature coefficient Voltage/temperature coefficient Current/temperature coefficient Operating temperature range Connector protection Connections
MSP 72 SunGrid 72 W 20 V 3,6 A
3,82 A 934 × 578 × 5 mm 288 × 200 × 50 mm
2,4 kg 72
MSP 162 SunGrid
MSP 216 SunGrid
162 W 20 V 8,1 A +/- 3 % 24,40 V 8,59 A 1185 × 866 × 3 mm 295 × 200 × 90 mm 4,3 kg 108 23 % – 0,36 % / °C – 0,28 % / °C – 0,06 % / °C – 40 to + 85 °C Protection class IP65 XT30 + Kabel XT30 to MC4
216 W 26,7 V 8,1 A
8,60 A 1744 × 866 × 3 mm 295 × 200 × 100 mm
5,7 kg 144
Easy Set-Up The useful eyelets in the corners of the ECTIVE SunGrid allow the solar module to be attached flexibly and easily. For instance, you can attach suction cups which allow you to quickly mount your solar panel to the side of your vehicle. This means that the ECTIVE SunGrid can be positioned perfectly at any time, depending on the situation and the position of the sun.
ECTIVE MSP SunGrid 3
Operating Instructions
Observe the following instructions when using your ECTIVE SunGrid solar
module. Also read and follow the `Safety instructions’ section and the
operating instructions for all devices connected to the solar module.
Unfold the solar module and orientate it towards the sun. Hang the module in a
place exposed to sunlight that is free of branches and other obstacles. This
will maximise the power output of the module. The perfect angle at which the
solar module should be orientated depends not only on the time of day but also
on the geographical location and the time of year.
Check the surface of the solar module, the cables and the connections on the
solar module and charge controller for any damage. If these are all undamaged,
connect the solar module to the corresponding inputs of a compatible solar
charge controller. Connect the battery that you want to charge to the
corresponding outputs of the charge controller.
Some inverters (e.g. the ECTIVE SSI series) and all-in-one solutions for self-
sufficient power supply (e.g. ECTIVE BlackBox and ECTIVE AccuBox) have an
integrated MPPT charge controller. Of course, the ECTIVE SunGrid solar module
can also be connected to these combined devices.
Ensure that all connections are secure and avoid short circuits. After use,
disconnect the ECTIVE SunGrid solar module from the solar charge controller,
fold it up
and store it safely in the supplied bag.
With a suitable charge controller, this solar module can be used to charge or
power the following battery technologies:
Lead-acid batteries (wet) Gel batteries AGM batteries Lithium batteries
ECTIVE SunGrid solar modules have two built-in USB ports (USB-A and USB-C),
which you can use to power or charge small devices such as smartphones,
tablets, cameras, navigation devices, etc.
4 ECTIVE MSP SunGrid
Cleaning and Maintenance
Remove dust and dirt from the surface of the solar module with a soft brush
and then wipe it clean with a damp cloth. Bird droppings should be removed as
quickly as possible to avoid a negative effect on the performance of the solar
module.
Troubleshooting
If the connected battery does not charge even though the solar module is
facing directly towards the sun, there may be various reasons for this:
Problem with the connections: Make sure that the solar module is correctly
connected to the solar charge controller and that this in turn is correctly
connected to the battery. Make sure that no connections are loose or have come
loose.
Problem with the charge controller: If there is no charge, the solar charge
controller may be defective or damaged. Make sure that the charge controller
is working as expected and have it repaired or replaced if necessary.
Incompatibility between charge controller and battery: Ensure that the charge
controller used supports the battery technology used. Read the operating
instructions for the charge controller.
Problem with the battery: Batteries can become deeply discharged if used or
stored improperly. Find out whether the battery used can be restored or
replaced.
Problem with the solar module: If all other sources of error have been ruled
out, the solar module is defective. In this case, please contact our customer
service.
Any questions? If you encounter problems that you cannot solve yourself,
please contact our customer service. We are happy to provide you with
qualified help!
ective.de/kontakt
ECTIVE MSP SunGrid 5
The SunGrid in the ECTIVE Eco System
ECTIVE MPPT Solar Charge Controller Solar charge controllers are the link
between the solar module and the battery, enabling a self-sufficient power
supply in which the batteries are charged with solar power. The technically
advanced MPPT charge controllers from ECTIVE adjust their input voltage so
that the solar system always delivers maximum power.
Supplement your mobile power supply with a charge controller from the ECTIVE
SC, ECTIVE DSC or ECTIVE SC PRO series to utilise solar power and be truly
independent:
ECTIVE SC Silent
ECTIVE DSC
ECTIVE SC PRO
Our ECTIVE SC 20 Silent solar charge controller is particularly suitable for
use with mobile solar modules such as the ECTIVE SunGrid. This high-quality,
fully automatic charge controller uses MPPT technology to maximise charging
efficiency: charging times and energy losses due to inefficiencies are thus
reduced. The ECTIVE MPPT SC 20 Silent is also quiet, lightweight, compact and
extremely userfriendly. It is maintenance-free and offers various protective
functions to protect your batteries from damage.
ECTIVE Batteries In combination with ECTIVE PRO inverters, modern ECTIVE
LiFePO4 batteries are ideal for a reliable and efficient stand-alone power
supply. The LC LT, LC Slim LT, LC Under Seat LT and LC Marine LT series offer
high maximum capacities, continuous discharge currents, useful Bluetooth
function and numerous other features. Of course, you can also use batteries
with other technologies (e.g. AGM or gel).
6 ECTIVE MSP SunGrid
ECTIVE All-in-One Solutions for Fully Self-Sufficient Power Supply The ECTIVE
portable solar modules in combination with our all-in-one devices from the
ECTIVE BlackBox and ECTIVE AccuBox series form the dream team for absolute
mobility and self-sufficiency.
These can be thought of as a giant power bank with many more connections and
application options. While the BlackBox is light and compact and can be
carried anywhere, the AccuBox offers more power and is ideal for outdoor power
supply. In general, the larger the battery capacity, the longer the
selfsufficient power supply works and the heavier the all-in-one device is.
The special advantage: Both the BlackBox and AccuBox have an integrated MPPT
solar charge controller.This allows the ECTIVE SunGrid solar module to be
connected directly to the BlackBox or AccuBox.
These in turn supply a wide variety of consumers with power: thanks to their
integrated inverter, the all-in-one devices also supply power for demanding
consumers such as televisions or refrigerators via the 230 V connections, just
like the socket at home.USB ports and 12 V connections are available for
smaller devices. In emergencies, an all-in-one device is even suitable as a
jump-start for broken-down vehicles.
ECTIVE BlackBox 3 models
512 to 1497 Wh
ECTIVE AccuBox 3 models
1536 to 3840 Wh
ECTIVE MSP SunGrid 7
Service and Complaints
If you have any questions about your device after purchase or during
operation, we are happy to help you. To speed up the process, please provide
information by email in advance, whenever possible with an explanation of the
issue and photos. To contact us and for product returns, please use the
following service address:
batterium GmbH, Robert-Bosch-Straße 1, 71691 Freiberg am Neckar, Germany T:
+49 7141 / 560 90 40 info@ective.de ective.de Tip: When contacting us
directly, please have your customer or invoice number and the article number
ready. In case you would like to return a product to us, please follow these
guideline to ensure a quick and secure handling of the issue If possible use
the original packaging as shipping carton. If you no longer have the original
packaging, please use suitable (UN-certified) packaging to ensure adequate
protection during transport. If the goods are not shipped in the original
packaging or a UN-certified packaging, the goods are considered damaged and
will therefore need to be billed when the item is returned. Please enclose the
following with the return shipment: Copy of the invoice (Service Form) Reason
for return An exact and detailed error description
8 ECTIVE MSP SunGrid
Disposal
Please dispose of all packaging material correctly or recycle it. In Germany,
the Electrical and Electronic Equipment Act [ElektroG] regulates the placing
on the
market, disposal and disposal and recycling of electrical and electronic
appliances. When decommissioning the appliance, please contact the nearest
recycling centre or your point of sale and ask for information about the
current disposal regulations.
ECTIVE MSP SunGrid 9
Stay in Touch!
You would like to learn more about ECTIVE and our products? Visit our Website!
You want to stay up to date or are looking for inspiration for your next
camper conversion? Follow us on Instagram!
Still have a specific question? Our Customer Service Team will be happy to
take care of you. There you will receive fast, qualified help with concerns
about our products!
Our goal is to make your life easier with our ECTIVE products. No matter if
you are on the road with your camper, your boat or just your backpack. No
matter if it`s a trip, a festival or a professional photo shoot: You should be
able to fully concentrate on your adventure or project. A reliable power
supply that runs efficiently and safely in the background strengthens your
back and you can take care of the essentials: Experiencing unforgettable
moments and creating priceless memories.
ective.de
ective.de
10 ECTIVE MSP SunGrid
batterium GmbH
Robert-Bosch-Straße 1 | 71691 Freiberg am Neckar T: +49 7141 1410870 |
info@ective.de | ective.de
© batterium GmbH, Edition 1, 09/2024
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>