Qubo QBook Wireless GPS Tracker User Manual
- July 31, 2024
- Qubo
Table of Contents
Qubo QBook Wireless GPS Tracker User Manual
What’s in the box
- Wireless GPS Tracker (with pre-installed SIM card)
- Charging Cable (Type A to Type C)
Battery Light Indicator Charging and Non-Charging Indicator
Under Voltage
0–25%
25–50%
50–75%
75–100%
Green LED (Network)
| State | Meaning |
|---|---|
| Fast Blink | Network Initialization |
| Blink | Device online/In a call |
| Slow Blink | Unable to Connect with Platform |
| Solid On | No SIM card is detected |
Blue LED (GPS)
| State | Meaning |
|---|---|
| Fast Blink | The device is searching for satellite signals |
| Slow Blink | The GPS module has already fixed a position |
| OFF | The device is in sleep mode or not operating |
Installation Process
Step 1:
Download Qubo Go App from App store or Play Store on your phone.
Step 2 :
Power On the device by pressing the Power button for 5 Seconds.
Step 3:
Create an account & add the Wireless GPS tracker device. Scan the QR code on
the back of the device & follow the instructions to setup
Step 4 :
After setup is successful, place the device somewhere safely in your
car/bike/bag/luggage.
Application Dashboard
How the device works
- Real time tracking with multiple modes- Turbo & Smart Saver
- Easy to mount with Magnetic grip
- Special ARM mode to ensure your vehicle safety (ARM mode allows you to get instant call alerts of Ride start, unusual sound alerts & tamper alerts)
- Can be used in Car, Bike, Other Assets (Kids bag etc)
- Device has a light sensor which detects if the device has been removed from its placement & triggers a tamper alert notification
- Listen to the sound surrounding the device by dialing to the device from Qubo Go App.
Battery Modes
**Tracking Mode
**
Product Specs
| Parameter | Description |
|---|---|
| Location | GPS |
| Cellular | Pre-installed SIM available with device |
| SIM type | Nano SIM |
| Battery Capacity | 10,000 mAh |
| Battery Life | Up to 60 days(on Smart Saver Mode) |
| Sensors | 3 axis Accelerometer , Light sensor |
| Dimension | 86.0 X 63.0 X 31.5 mm |
| Weight | 245 gm |
| Operating Temperature | -20C ~ 70C |
| Charging Wire Type | Type A to Type C (Included in box) |
| IP rating | IP66 |
| Mounting type | Magnetic |
Troubleshooting
Common Issues| Status on Device/App| Possible Cause|
Solution
---|---|---|---
Not able to setup device| Device is not getting added on App| The SIM card may
not be inserted properly| Check the SIM slot and insert it again
The metal side of the SIM card may be stained| Clean the metal part of SIM
card with an eraser
Network signal is very weak| Change your location and try again
Location not getting updated| Device has not been fully setup on app| SIM is
not activated| Contact Customer Support
Device status is shown as ’Not Reachable’ on App AND GPS (Blue) LEDon the
device is blinking rapidly| The device is used in the area where signals
cannot reach, such as basement, etc.| Change your location and try again
Device status is shown as ’Not Reachable’ on App AND Green LED on device is
not blinking| Network is not available| Trying changing the position of device
to connect with network
GPS (Blue) Indicator and Network (Green) indicator both are not blinking, and
Single Tap on Power Button shows only One Battery Bar| Device is not powered
On| Turn on the device in case its powered Off
App is showing that Subscription has expired| Subscription has expired| Renew
the subscription plan on the app
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>