lampenmanie VT-8412 LED Dome Light Instruction Manual
- June 1, 2024
- Lampenmanie
Table of Contents
lampenmanie VT-8412 LED Dome Light
Product Usage Instructions
- This product is an LED Dome Light with CCT select and a built-in switch.
- It offers colour-changing capabilities and comes in a 3-in-1 design.
Warning
- Do not dispose of this product with household waste.
- Caution: risk of electric shock. Only replace the light source with the help of a professional.
Attention!
- Avoid looking directly at the LED light beam.
- Use the product only with the rated voltage.
- Do not use it if the protective cover is damaged.
- Avoid use in unfavourable conditions like dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes.
FAQ
- Q: Can I replace the light source myself?
- A: No, it is recommended to replace the light source with the help of a professional to avoid any risks.
- Q: What should I do if the product heats up excessively?
- A: Ensure there is proper air circulation around the product and avoid covering it. If the issue persists, contact customer support for assistance.
TECHNICAL DATA
| MODEL | VT-8412 | VT-8418 | VT-8424 | VT-8436 |
|---|---|---|---|---|
| SKU | 217602, 217603 | 217604, 217605 | 217606, 217607 | 217608, 217609 |
| WATTS | 12W | 18W | 24W | 36W |
| INPUT VOLTAGE | AC:220-240V, 50/60Hz | |||
| LUMEN | 1200 LM | 1800 LM | 2600 LM | 3900 LM |
| BEAM ANGLE | Sphere 360° | Sphere 360° | Sphere 360° | Sphere 360° |
| COLOUR TEMPERATUR | 3000K/4000K/6500K | |||
| IP RATING | IP20 | IP20 | IP20 | IP20 |
| DIMENSION | Ø260x55mm | Ø310x55mm | Ø350x55mm | Ø500x80mm |
| LIFE SPAN | 20,000 Hours | 20,000 Hours | 20,000 Hours | 20,000 Hours |
| ON/OFF CYCLE | >15,000 | >15,000 | >15,000 | >15,000 |
| BODY TYPE | Plastic | Plastic | Plastic | Plastic |
| OPERATION TEMPERATURE | -20°C to +45°C | -20°C to +45°C | -20°C to | |
| +45°C | -20°C to +45°C |
This product contains a light source of energy efficiency class
INTRODUCTION & WARRANTY
Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of the product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a certified person.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- Proper grounding should be ensured throughout the installation.
- For Indoor use only
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similarly qualified person to avoid a hazard.
- Method of attachment of the cable or cord such that any replacement can only be made by the manufacturer, his service agent or similarly qualified person.
- This marking indicates that this product should not be disposed of with other household wastes.
- Caution, risk of electric shock.
FEATURES
ATTENTION!
Do not look directly at the LED light beam. The product can only be supplied
by rated voltage or voltage within the range provided.
It’s forbidden to use the product with a damaged protective cover. The product
must not be used in unfavourable conditions, e.g. dust, water, moisture,
vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. In the
area of strong electromagnetic interference, the functioning of the product
may be disrupted.
USAGE GUIDELINES / MAINTENANCE
- Any maintenance work must be performed when the power supply is cut off and the product has cooled down.
- Clean only with so¡ and dry clothes.
- Do not use chemical detergents.
- Do not cover the product. Ensure free air access.
- The product may heat up to a higher temperature.
MOUNTING
- Read the manual before mounting.
- Mounting should be performed by a qualified electrician.
- Exercise caution. The product has a protective contact /terminal.
- Failure to connect the protective lead may lead to electric shock.
- Mounting diagram: see pictures.
- Check for proper mechanical fastening and connection to electrical power before first use.
INSTALLATION INSTRUCTION
- Switch Off the Power Before Starting the Installation.
- Twist and remove the cover (Ref Image Part 2)
- When installing, it is necessary to remove the poly foam from the dome light.
- Drill a hole in the ceiling to fix the light using screws (Ref Image Part 3)
- Connect the wires (Ref Image Part 4) before fixing the light using screws on the ceiling.
- Twist and lock the cover to the light (Ref Image Part 5)
- Switch ON the power and test the light.
POWER
ON/OFF
INSTALLATION DIAGRAM
DISASSEMBLY DIAGRAM
(For Market surveillance team only)
Note: Light source removal will void the warranty.
