shenzhen RT02L Realfit GOPods E5 User Manual

June 5, 2024
Shenzhen

Reality
GoPods E5
Getting Started

The Guide contains important information, please read it carefully before using

PACKING LIST

PRODUCT INTRODUCTION

|
---|---

  1. Charging Box
  2. Indicator
  3. Micro-USB charging port
  4. Earbuds touch area
  5. Mic
  6. Front cavity tuning holes
  7. Charging contacts
  8. Rear cavity tuning holes

HOW -TO

On
Take earbuds out of Charging Box for auto ‘ON’

Sleep
Put earbuds back into the charging box for auto ‘OFF’ and sleep

Bluetooth pairing

  • First use: take earbuds out of Charging Box for auto-pairing.
  • Pairing mode: take earbuds out of Charging Box for pairing mode if no device connection within 15s; when earbuds are connected to the phone, disconnect the Bluetooth connection from the phone for pairing mode; when earbuds are in Charging Box, press and hold touch area for 5s for pairing.
  • Bluetooth connection: When earbuds are in pairing state, open Bluetooth search interface, locate Realfit GoPods E5 and then click Connect.

Auto reconnection
Auto connects to a previously ‘paired’ device when ‘powered’ on.

Touch operation
Touch twice: Play/Pause music, Answer phone
Touch three times: Next ‘media/song/video’

Press and hold 2s: If in a call or call incoming-Reject Call/Hang up.
Press and hold 2s on both sides: enter/exit game mode

Charging
Earbuds charging: Auto charging of the earbuds begin when put into the charging box Check Charging box battery: When Charging through a USB, the red indicator shows that the case is charging, and green indicator shows fully charged.

Check earbuds battery
After connecting with your phone, you are able to check the earphone battery level through cellphone Bluetooth status.

Reset earbuds

  1. Ignore or cancel RealfitGoPods E5 pairing and delete connection history in Bluetooth device list.
  2. Put earbuds into the Charging Box, and press and hold more than 5s the touch areas of both earbuds, the reset succeeds when the phone locates Realfit GoPods E5.

BASIC PARAMETER

Product Name Realfit GoPods E5
Model RT02
Charging Box Port Micro-USB
Single battery life about 4.5 hours of music playback about 3 hours for

continuous call
Total battery life with Charging Box| about 20 hours
Charging time| about 2 hours
Bluetooth Version| BT5.0
Bluetooth Protocols| A2DP / AVRCP / HFP
Bluetooth Code| SBC/AAC
Communication distance| 10 meters
Frequency| 2.4-2.4835GHz
Power| > – 6dBm , ≤8dBm

  • Single battery life is based on 50% volume ACC music playing, actual battery life is subject to actual use.

WARRANTY

Thank you for choosing Real fit accessories. We will provide comprehensive warranty services according to local laws and regulations.

Warranty Coverage and Restrictions:
From more details about our warranty policy, please visit httos:/Awww.realfit.net.cn 

well as any of the following situations void the warranty:

  1. The warranty has expired.
  2. Independent disassembly, repair or modification of the product or net following the instructions.
  3. Damage caused by force majeure ( flood, earthquake, lightning, etc. )
  4. No valid purchase vouchers ( sales invoices or receipts, etc. ).
  5. Natural wear and tear.
  6. Non-product quality issues.

WARRANTY CARD

Dear user, thank you for using this product. To better serve your needs, please read and fill out the warranty card.

User Information
Name:……………………………………………………………………………………………….
Phone No…………………………………………………………………………………………
Address:…………………………………………………………………………………………..
E-mail:…………………………………………………………………………………………….

Product Information
Model:…………………………………………………………………………………………….
S/N:……………………………………………………………………………………………….

Dealer Information
Date of Purchase:…………………………………………………………………………..
Dealer’s Name:………………………………………………………………………………
Dealer’s Address:……………………………………………………………………………

NOTES

  • Avoid exposure to liquid and high humidity environment.
  • Avoid throwing, crushing, or tossing as to prevent damage.
  • Avoid contact with strong magnets as to prevent the magnetic earbuds from being demagnetized.
  • Keep out of the reach of children.
  • Do not attempt to dissemble the device. Please contact customer support for assistance.
  • For your safety, please do not use while riding a motorcycle or bike, driving, or crossing the road.
  • For health reasons, avoid listening on high volume for extended periods.

This symbol means that according to local laws and regulations your product and/or its battery Shall be disposed of separately from household waste. When this product reaches its end of life, mum user has the choice to give his product to a competent recycling organization. Proper recycling of your product will protect human health and the environment.

Recycling Initiative

At Realfit we understand that our responsibility doesn’t end at selling you our products. Reality devices has been working in the area of safe disposal of electronic waste. Since devices, tablets, and other electronic items are made of hazardous constituents. Under the Guidelines of the Ministry of Environment, Forest and Climate Change, Government of India, E-waste (Management ) Rule,2016 and Amendment E-waste Rule 2018. Reality devices will seek shared responsibility and cooperation from customers in reducing the environmental impact of their products. Reality devices will comply with all the applicable laws related to e-waste management. As a part of the e-waste recycling initiative, Realfit devices has partnered with an authorized e-waste company named as 3R Recycler for the collection, dismantling and disposing of E-waste collected from all over India. 3R vision is to look at e-waste not just as waste, but as an important resource that can be made useful instead of shunning it as a social and environmental burden with their fully automated facility for e- waste recycling. For further information about e-waste recycling and our e-waste recycling partner & their process, you may log on to www.3rrecycler.com or write an email to [email protected].
Call us: Toll-Free No.- 1800 102 8632.

EU regulatory conformance
RF exposure information: The EIRP power of the device at maximal case is below the exempt condition, 20mW specified in EN62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation(1999/519/EC).
Hereby, Zhi Mei Shang Pin Technology(shenzhen) Co.,Ltd.declares that the radio equipment type RT02 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.realfit.net.cn

Manufacturer information:
Company name: Zhi Mei Shang Pin Technology(shenzhen) Co.,Ltd.
Address Room A802, Building G4, TCL International E City, Shuguang Community, Xili Street, Nanshan District, Shenzhen, Guangdong, China.

Operation temperature: 0~50 Operation frequency(Max power) Bluetooth: 2402-2480 (4.8dBm)

FCC regulatory conformance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

FCC ID: Right.2AXBT-RT02R ; Left.2AXBT-RT02L

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Shenzhen User Manuals

Related Manuals