COOPER LIGHTING LDRT4C 4 Inch General Illumination Install From Below Instruction Manual

LDRT4C 4 Inch General Illumination Install From Below

“`html

Specifications

• Catalog #: LDRT4C | EU4C | 4LB
• Type: 4 Round, Retrofit/Install from Below Downlight
• Beam Options: Narrow, Medium, or Wide Beam or Wall Wash
• Light Output: 800-4500 Lumens

Product Features

• Can be used to comply with Title 24 Part 6 LED Enclosed Light
  Source Requirements (JA8)

• Control Compatibility: WaveLinx LITE, WaveLinx PRO, CO BioUp,
  Melanopic Lighting

• PLIANT OPTIO M and TRADE AGREEMENTS ACT available

Dimensional and Mounting Details

• Inside Diameter: 9-3/4″ [248mm]
• Flange Diameter: 12-7/8″ [328mm]
• Max Height: 2-1/8″ [54mm] to 20-3/16″ [514mm]

Product Usage Instructions

1. Ensure power source is turned off before installation.

2. Choose appropriate beam option based on lighting needs.

3. Refer to the single-line order information for selecting the
   desired components.

4. Follow the provided dimensional and mounting details for proper
   installation.

FAQ

Q: How do I select the correct lumen output and color

control?

A: Refer to the Multi-line Ordering Information Option for
selecting the desired lumen output and color control options based
on your requirements.

Q: Can this product be used in compliance with specific

lighting regulations?

A: Yes, this product can be used to comply with Title 24 Part 6
LED Enclosed Light Source Requirements (JA8).

Q: What are the compatible control systems for this

product?

A: Compatible control systems include WaveLinx LITE, WaveLinx
PRO, CO BioUp, and Melanopic Lighting.

“`

Project Prepared by

Catalog # Notes

Type Date

LDRT4C | EU4C | 4LB
4″ Round, Retrofit/Install from Below Downlight Narrow, Medium or Wide Beam or Wall Wash, Tunable white and dim to warm 800-4500 Lumens
Typical Applications Office · Education · Healthcare · Hospitality · Retail · Code-Compliance Areas · Sports Venues

Interactive Menu
· Order Information page 2 · Product Specifications page 4 · Energy Data page 6 · Connected System page 7 · Product Warranty

Product Certification Product Features

Can be used to comply with Title 24 Part 6 LED Enclosed Light Source
Requirements (JA8)

Control Compatibility

WaveLinx LITE

WaveLinx PRO

CO

BioUp
Melanopic Lighting
PLIANT OPTIO M
TAA
TRADE AGREEMENTS ACT
AVAILABLE

NS

Top Product Features
· 800 to 4500 lumens; ENERGY STAR® qualified · Remodel, retrofit or international installation; Retrofits existing HID, incandescent or compact fluorescent downlights · Die-cast or spun aluminum reflectors; Narrow beam, medium beam and wide beam distributions; Optional shallow
trim for 2×4 construction · Standard 0-10V driver dims to 1%; Easy disconnect for LED engine replacement and installation · D2WTM option from 3000K to 1850K · Tunable White CCT range: W2N = 2700K to 6500K or 2000K to 5000K / BioUp = 2700K to 5000K · Options to meet Trade Agreements Act requirements

Dimensional and Mounting Details

Inside Diameter
Flange Diameter
9-3/4″ [248mm]

MAX HEIGHT (SEE TABLE)
2-1/8″ [54mm]

12-7/8″ [328mm]

20-3/16″ [514mm]

3-9/16″ [93mm]

DT4RF=4 inch frosted acrylic ring See Accessories for Ordering
CLICK HERE dimension information

PS52075222 page 1
April 28, 2024 7:05 PM

LDRT4C | EU4C | 4LB

Single Line Order Information
SAMPLE ORDER NUMBER: LDRT4C109030D010TRM1HEM7
Invoice will indicate separate fixture components (housing, trim, module) which will ship complete from a single CLS facility in separate cartons.
To receive separate components (housing, trim, module) shipment, click on the “Multi-Line Ordering Information Option” button to the right.

Multi-line Ordering Information Option

Housing
LDRT4C=LED Downlight Retrofit 4″ Nominal Aperture LDRT4BCP=LED Downlight Retrofit 4″ Nominal Aperture, Chicago Plenum
For TAA use Multi-line Ordering

08=800 lumens 10=1000 Lumens 15=1500 Lumens 20=2000 Lumens (10) 25=2500 lumens (10)

Lumen (1)
30=3000 Lumens (10) 35=3500 lumens (10) 40=4000 Lumens (10) 45=4500 Lumens (10)

Color Control
D2W=Dim to warm for 800-2500, 3500-4500 lumens; 90CRI, 3000K W2N2765=Tunable White for 1000-3500 lumens, 2700K-6500K (D5LT & DE010 drivers only), 90CRI W2N2050=Tunable White for 1000-3500 lumens, 2000K-5000K (D5LT & DE010 drivers only), 90CRI B2750=BioUp 2700K-5000K, 800-2500 lumens (D5LT & DE010 drivers only) B=BioUp static CCT, for use with 3500K, 4000K and 5000K, 800-2500 lumens (D5LT & DE010 drivers only)

CCT (20)
Static BioUp 35=3500K 40=4000K 50=5000K

Driver (Specify from Driver column.)
D010=0-10V Dimming, 1% to 100%, 120V-277V, D2W=800-2500 lumens 1D010=0-10V Dimming, 1% to 100%, 120V, D2W=3500-4500 lumens 2D010=0-10V Dimming, 1% to 100%, 277V, D2W=3500-4500 lumens 3D010=0-10V Dimming, 1% to 100%, 347V dedicated drivers, D2W=800 to 2500 lumens, 3500 and above use step down transformer D010TR=0-10V (120-277V) or Phase-Cut (120V) dimming, 5-100%, D2W=800-2500 lumens 1D010TR=0-10V or Phase-Cut Dimming, 5% to 100%, 120V, D2W=3500-4500 lumens 2D010TR=0-10V Dimming, 5% to 100%, 277V, D2W=3500-4500 lumens 3D010TR=0-10V Dimming, 5% to 100% 347V step down transformer, D2W=800-2500 & 3500-4500 lumens
DE010=0-10V Dimming, 0% to 100%, 120V-277V, D2W=800-2500 lumens / W2N=1000 lumens / B2750=800 lumens 1DE010=0-10V Dimming, 0% to 100%, 120V, D2W=3500-4500 / W2N=1500-3500 lumens / B2750=1000-2500 lumens 2DE010=0-10V Dimming, 0% to 100%, 277V, D2W=3500-4500 / W2N=1500-3500 lumens / B2750=1000-2500 lumens 3DE010=0-10V Dimming, 0% to 100%, 347V step down transformer, D2W=800-2500 and 3500-4500 lumens / W2N=1000-3500 lumens / B2750=800-2500 lumens
D5LT=Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 120V-277V, D2W=800-2500 lumens / W2N=1000 lumens / B2750=800 lumens 1D5LT=Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 120V, D2W=3500-4500 lumens / W2N=1500-3500 lumens / B2750=1000-2500 lumens 2D5LT=Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 277V, D2W=3500-4500 lumens / W2N=1500-3500 lumens / B2750=1000-2500 lumens 3D5LT=Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 347V step down transformer, D2W=800-2500 & 3500-4500 lumens / W2N=1000-3500 lumens / B2750=800-2500 lumens
DMX=DMX/RDM Logarithmic Dimming, 0% to 100%, 120V-277V, D2W=800-2500 lumens (14) 1DMX=DMX/RDM Logarithmic Dimming, 0% to 100%, 120V, D2W=3500-4500 lumens (14) 2DMX=DMX/RDM Logarithmic Dimming, 0% to 100%, 277V, D2W=3500-4500 lumens (14) 3DMX=DMX/RDM Logarithmic Dimming, 0% to 100%, 347V step down transformer, D2W=800-2500 & 3500-4500 lumens (14) DMXC5=DMX/RDM Logarithmic Dimming, 0% to 100%, 120V-277V, RJ45 Connection, D2W=800-2500 lumens (14) 1DMXC5=DMX/RDM Logarithmic Dimming, 0% to 100%, 120V, RJ45 Connection, D2W=3500-4500 lumens (14) 2DMXC5=DMX/RDM Logarithmic Dimming, 0% to 100%,, 277V, RJ45 Connection, D2W=3500-4500 lumens (14) 3DMXC5=DMX/RDM Logarithmic Dimming, 0% to 100%, RJ45 Connection, 347V step down transformer, D2W=800-2500 & 3500-4500 lumens (14)
DLE=Lutron Ecosystem dimming 1% to 100%, 120V-277V, 800-2500 lumens (up to 2000 lumens for remote driver) 1DLE=Lutron Ecosystem dimming 1% to 100%, 120V, D2W=3500-4500 lumens 2DLE=Lutron Ecosystem dimming 1% to 100%, 277V, D2W=3500-4500 lumens 3DLE=Lutron Ecosystem dimming 1% to 100%, 347V with step down transformer, D2W=800-2500 & 3500-4500 lumens
DLV=Low voltage dimming driver (1-100%) for use with DLVP system, D2W=800-2500 lumens (3)

Information below for reference only. Remote driver &
plug in driver
Offered 800-2500 with D2W
Offered 800-2500 with D2W
Offered 800-2500 with D2W, W2N limited to 1000 lumens with remote driver and 10003500 lumens with plug in drivers, Bio-Up limited to 800 lumens and 800-2500 lumens with plug
in drivers Offered 800-2500 with D2W, W2N limited to 1000 lumens with remote driver and 10003500 lumens with plug in drivers, Bio-Up limited to 800 lumens and 800-2500 lumens with plug
in drivers
Offered 800-2500 with D2W
Offered 800-2500 with D2W
Offered 800-2500 with D2W
Offered with remote driver only for 800-2500 with D2W

Driver Options

Blank=Integral driver RC100=Remote 100ft (3) (33) RC75=Remote 75ft (3) (33) RC50=Remote 50ft (3) (33) RC25=Remote 25ft (3)

RC15=Remote 15ft (3) RC5=Remote 5ft (3) RC2=Remote 2ft (3)
PD=Plug in Driver

Continued on next page.
PS52075222 page 2
April 28, 2024 7:05 PM

Single Line Order Information

LDRT4C | EU4C | 4LB

Trim Distribution (5)
N=Narrow, Spun Aluminum (26) (30) M=50° Cutoff, Medium Beam Reflector, Spun Aluminum MD=45° Cutoff, Medium Beam Reflector, Spun Aluminum W=Wide, Spun Aluminum S=Shallow, Spun Aluminum PS=Non-Conductive Shallow (dead front), white (11) (12) CS=Cast Shallow, Die Cast Aluminum BA=Spun Aluminum Baffle (7) Wall Wash SWN=Single Wall Wash, Spun Aluminum DWN=Double Wall Wash, Spun Aluminum CW=Corner Wall Wash, Spun Aluminum LSWW=Lensed Single wall wash, Spun Aluminum LDWW=Lensed Double wall wash, Spun Aluminum

Trim Flange
0=White Polymer Trim Ring 1=Self-flanged (13) 2=White Painted Selfflanged

Trim Finish
LI=Specular Clear (9) H=Semi-Specular Clear (9) WMH=Warm Haze (9) WH=Wheat (9) GPH=Graphite Haze (9) B=Specular Black (9) MW=Matte White (Antimicrobial) MB=Matte Black (8) MMS=Matte Metallic Silver (8)

Options(3) (16) (31)
EMBOD=Bodine® Emergency Module with Remote Test Switch (25) EMBOD6ST=Bodine® 6W Self Test Emergency Module with Remote Test Switch EM7=7W Emergency Module with Remote Test Switch EM14=14W Emergency Module with Remote Test Switch EMBOD7ST=Bodine® Self Test Emergency Module (25) EMV7=7W Low Voltage Emergency Module with Remote Test Switch (4) EMV14=14W Low Voltage Emergency Module with Remote Test Switch (4) ETRD=Emergency transfer device (32) WPST=Factory installed WaveLinx PRO Sensor Kit (15) (18) WLST=Factory installed WaveLinx LITE Sensor Kit (15) (17) WPN = WaveLinx PRO Wireless Node without sensor (21) (36) WLN = WaveLinx LITE Wireless Node without sensor (not compatible with Tuneable White) (35) (36)

TRM4P=White metal trim ring (2) LGSKT4IP66=IP66 Gasket Kit DT4RF=4 inch frosted acrylic ring (29)

Accessories (Sold separately) (22)

Connected Lighting Systems (3) (15)
WPST=Field installed WaveLinx sensor Kit (17) WLST=Field installed WaveLinx LITE Sensor Kit (18)

Transformers H347=H347 for 98CRI 4000 lumens and below; D2W 4500 lumens and below; W2N 4000 lumens and below H347200=347 to 120V Step Down Transformer, 200VA

Notes: 1. Nominal Lumens will vary depending on selected color, CRI, driver and reflector finish. Reference IES files. 2. Order trim with polymer trim ring (Consult specification sheet for color ordering information and options). 3. Not available with Chicago Plenum. 4. ULus listed only 5. Beam angles are nominal with LI finish trims. 7. Only available with Matte White and Matte Black Finishes. 8. Available only on CS distributions. 9. Not available on PS, CS or BA distributions. 10. Product is marked spacing. Reference table on page 4. 11. PS available in self-flanged MW finish only. 12. Offered up to 2000 lumens 13. Flange is the same finish as the reflector 14. DMX fixtures default to full on upon loss of DMX signal. 15. Refer to system specifications for additional information,features, and benefits. Order either factory installed option or accessory. Use with 0-10V driver. 16. Non-IC

17. WLST=WaveLinx LITE tilemount sensor kit for daylight dimming, PIR motion sensing, use with D010 only (Refer to WaveLinx LITE system specifications) 18. WPST=WaveLinx PRO wireless sensor kit for daylight dimming, PIR motion sensing, and optional RLTS – Real Time Location Services, use with 0-10V only. 19. Only product configurations with these designated prefixes are built to be compliant with the Buy American Act of 1933 (BAA) or Trade Agreements Act of 1979 (TAA), respectively. Please refer to DOMESTIC PREFERENCES website for more information. Components shipped separately may be separately analysed under domestic preference requirements. Offered with spun aluminum narrow (N), medium (M), and wide (W) trims. 20. Not required for W2N and D2W. 21. WPN = WaveLinx PRO wireless node provides luminaire-level control with scene and zone configuration without an integrated sensor; Connects wirelessly with daylight dimming sensor and PIR motion sensor if desired. Use with D010 or DE010 drivers only. 22. Accessories sold separately will be separately analyzed under domestic preference requirements. Consult factory for further information. 23. Accessory (Requires knife edge accessory ring)

25. Not available for W2N 26. Offered up to 2500 lumens with D2W and 3500 with W2N – D010, D5LT, DE010 up to 4500 lumens with 98 CRI – D010TR, DMX up to 3000 lumens with 98 CRI – DLE, DL2 up to 2500 lumens with 98 CRI 29. Order with self flanged trim. 31. 120V-277V 32. Used to bypass local control during outage. Must be used in conjunction with UL 1008 device (provided by others) 33. Not available with Lutron drivers
35. WLN = WaveLinx LITE wireless node provides luminaire level control with scene and zone configuration without an integrated sensor; Connects wirelessly with daylight dimming sensor and PIR motion sensor if desired. Use with D010 or DE010 drivers only.
36. Not compatible with 347V or Chicago plenum.

PS52075222 page 3
April 28, 2024 7:05 PM

LDRT4C | EU4C | 4LB

Product Specifications
Lower Shielding Reflector · Painted die-cast aluminum or spun aluminum
lower reflector with lensed upper optical chamber provides superior lumen output with minimal source brightness · Spun reflectors are available in all Portfolio anodized finishes · Hyperbolic reflector provides minimal aperture brightness and glare. · Available with non-conductive polymer reflector up to 2000 lumens · Decorative frosted acrylic ring provides a light glow in the ceiling
Wall Wash Reflector · Open Wall Wash – wall wash reflector with gradient
kicker offered in single, double and corner wall wash provides even vertical illumination with minimal source brightness. · Rotatable Lensed Wall Wash – Rotatable Lensed wall wash reflector offered in single and double wall wash provides even vertical illumination with minimal source brightness.
Trim Retention · Two torsion springs hold reflector flange tightly to
the finished ceiling surface
Plaster Ring · Galvanized steel ring installs with 2 mouse trap
springs for secure installation and accommodates up to 2 inch ceiling thickness. · Retrofit – Converts existing HID, incandescent or compact fluorescent downlights to energy saving LED. · Simple below ceiling installation without removing the existing fixture. Pre-wired flexible conduit with snap in connector installs into 1/2″ knockout on the existing junction box. · LDRT67B includes oversize adapter ring for larger openings
Thermal · Aluminum heat sink conducts heat away from the
LED module for improved performance and longer life
LED System · Contains a plurality of high brightness white LED’s
combined with a high reflectance upper reflector and convex transitional lens producing even distribution without pixilation · Auto resetting, thermally protected, LED’s are turned off when safe operating temperatures are exceeded · Quick disconnect allows for tool-less replacement of LED engine from below ceiling · L70 55,000 hours
Vividtune · D2WTM ­ dim-to-warm shifts CCT from 3000K to
1850K as fixture dims mimicking halogen sources. · W2N – Tunable white CCT range 2700K to 6500K or
2000K to 5000K, 90 CRI. Standard

· BioUp – Tunable white CCT range 2700K to 5000K Provides the biological effectiveness of natural sunlight, with color temperatures that are more comfortable for indoor environments
Driver · Standard 120-277V 0-10V dimming driver provides
flicker free dimming from 100% to 1% · Optional 120V leading edge/0-10V, <1% 0-10V, Fifth
Light, DMX or Lutron® Ecosystem · Driver can be serviced from above or through the
aperture · Distributed low voltage power system combines
power, lighting, and controls with ease of installation. · Optional magnetically guided snap in driver for ease of maintenance.
Emergency Option · Provides 90 minutes of standby lighting, meeting
most life safety codes for egress lighting · Available Self-Test with remote charge indicator
and test switch · Emergency transfer device (ETRD) senses the
loss of power regardless of local control settings allowing emergency power to the fixture. · UL 924 listed
Connected Lighting System Two WaveLinx connected solutions to choose from. Refer to WaveLinx system specifications and application guides for details.
WaveLinx PRO Tilemount Sensor Kit
· WaveLinx PRO WPST tilemount sensor kit offers daylight dimming, PIR motion sensing, scene and zone configuration, automatic commissioning; and optional RLTS – Real Time Location Services available.
WaveLinx PRO Wireless Node
· WaveLinx PRO WPN wireless node provides luminaire-level control with scene and zone configuration without an integrated sensor; Connects wirelessly with daylight dimming sensor and PIR motion sensor if desired. Use with 0-10V driver only. Note: Not compatible with 347V or Chicago plenum.
WaveLinx LITE Tilemount Sensor Kit
· WaveLinx LITE WLST tilemount sensor kit offers daylight dimming and PIR motion sensing, scene and grouping configuration.
WaveLinx LITE Wireless Node
· WaveLinx LITE WLN wireless node provides luminaire level control with scene and zone configuration without an integrated sensor; Connects wirelessly with daylight dimming sensor and PIR motion sensor if desired. Use with 0-10V driver only. Note: Not compatible with 347V or Chicago plenum.

WaveLinx Tilemount Sensor Kits Application
· The WPST and WLST tilemount sensor kits include a control module mounted on the luminaire junction box via 1/2″ knock-out, and a tilemount sensor on 54-inch whip; for ceiling installation by direct-mount spring clips or via mounting bracket in octagon ceiling boxes.
· The WPST and WLST tilemount sensor kits may be ordered as factory installed on the luminaire, or ordered separately as a field installed accessory kit.
· Note: WaveLinx PRO devices are only compatible with the WaveLinx PRO system.
· Note: WaveLinx LITE devices are only compatible with the WaveLinx LITE system.
Code Compliance · Thermally protected · cULus Certified to UL 1598 / C22.2 No. 250.0 suitable for wet locations with downlight; damp location with wall wash and hyperbolic with covered ceiling · IP66 rated when used with IP66 gasket kit accessory · Use IP66 gasket with non conductive reflector for steam room applications up to 2000 lumens and 40°C. · Optional City of Chicago environmental air (CCEA) marking for plenum applications · FCC CFR Title 47 Part 15 Class B at 120VAC and Class A at 277VAC · Insulated ceiling (IC) rated up to 800 lumens (98 CRI & D2W); 1000 lumens (W2N). All others are non-IC rated (insulation must be kept 3″ from top and sides of housing). · Can be used for State of California Title 24 high efficacy LED compliance under JA8, reference Modernized Appliance Efficiency Database System (MAEDBS) for 2016 JA8 High Efficacy Lighting · RoHS compliant · Photometric testing completed in accordance with IES LM-79 · LED life testing completed in accordance with IES LM-80-08 and TM-21-11 standards · See table on page 3 for marked spacing requirements
Warranty
· Five year warranty www.cooperlighting.com/legal

Marked Spacing

4-inch Marked spacing for D2W

3500-4500

36

36

8

4-inch Marked spacing for W2N

3000

36

36

0.5

3500

36

36

8

4-inch Marked spacing for BioUp

2000

36

36

0.5

2500

36

36

8

PS52075222 page 4
April 28, 2024 7:05 PM

Dimensional and Mounting Details
Inside Diameter Flange Diameter
9-3/4″ [248mm]

LDRT4C | EU4C | 4LB

MAX HEIGHT (SEE TABLE)
2-1/8″ [54mm]

12-7/8″ [328mm]

20-3/16″ [514mm]

3-9/16″ [93mm]

VIVIDTUNE

Flange DIAMETER INSIDE DIAMETER

CATALOG # or WIDTH [IN] [IN]

4LBN

5.67

4.24

4LBM

5.67

4.26

4LBW

5.67

4.27

4LBBA

5.67

4.28

4LBMD

5.67

4.26

4LBHY

5.67

4.34

4LBS

5.67

4.23

4LBPS

5.67

4.23

4LBCS

5.67

4.23

4LBLSWW

5.67

4.27

4LBLDWW

5.67

4.27

D2W

800-2500 LUMENS

3500, 4500 LUMENS

5.2

8.1

5.2

8.1

4.8

7.7

5.2

8.1

5.9

8.9

5.2

8.1

3.6

6.4

3.6

6.5

3.6

6.5

4.8

7.7

4.8

7.7

MAX HEIGHT

W2N

1000-3000 LUMENS

3500 LUMENS

5.2

6.1

5.2

6.1

4.8

5.7

5.2

6.1

5.9

6.9

5.2

6.1

3.6

4.5

3.6

4.5

3.6

4.5

4.8

7.7

4.8

7.7

BIOUP

800-2000 LUMENS

2500 LUMENS

5.2

6.1

5.2

6.1

4.8

5.7

5.2

6.1

5.9

6.9

5.2

6.1

3.6

4.5

3.6

4.5

3.6

4.5

4.8

7.7

4.8

7.7

PS52075222 page 5
April 28, 2024 7:05 PM

LDRT4C | EU4C | 4LB

Energy and Performance Data

D010 DRIVER ENERGY DATA

Series Input Voltage 120-277VAC Input Current (A) Input Power (W) In-rush (A) Inrush duration (µs) THDi (%) PF

800 lumen

120V

277V

0.085

0.041

10.15

10.52

3.6

8.3

220

135

5.57

9.63

0.99

0.95

1000 lumen

120V

277V

0.084

0.042

10.04

10.43

3.6

8.4

226

136

7.78

9.24

0.99

0.95

1500 lumen

120V

277V

0.135

0.063

16.17

16.56

2.3

9.5

230

125

4.75

9.93

0.99 0.94

Series Input Voltage 120-277VAC Input Current (A) Input Power (W) In-rush (A) Inrush duration (µs) THDi (%) PF

3500 lumen

120V

277V

0.333

0.152

39.83

39.84

3.1

14.3

200

94

4.25

10.05

0.99 0.94

4000 lumen

120V

277V

0.404

0.181

48.38

47.94

3.1

14.5

197

95

5.02

7.97

0.99 0.95

4500 lumen

120V

277V

0.421

0.192

50.22

50.17

5.6

22.6

215

120

6.12

8.35

0.99 0.95

Minimum starting temperature -30°C (-22°F)* (Nominal input 120-277VAC & 100% of rated output power)
Sound Rating: Class A standards
Notes: Emergency Battery packs are rated for a minimum starting temperature of 0°C.

2000 lumen

120V

277V

0.189

0.084

22.58

22.63

2.1

9.7

243

132

8.03

7.44

0.99 0.96

2500 lumen

120V

277V

0.276

0.121

32.98

32.57

2.5

11.8

215

111

9.86

6.57

0.99 0.97

3000 lumen

120V

277V

0.276

0.121

32

32.57

3.6

11.8

220

111

5.57

6.57

0.99

0.99

Beam Angles
Trim 4LBMH 4LBMLI 4LBNH 4LBNLI 4LBSH 4LBSLI 4LBWH

Beam Angle MEDIUM BEAM 50° CUTOFF 65° BEAM (H) MEDIUM BEAM 50° CUTOFF 45° BEAM (LI) NARROW 55° BEAM (H) NARROW 30° BEAM (LI) SHALLOW 85° BEAM (H) SHALLOW 65° BEAM (LI) WIDE 80° BEAM (H)

Trim 4LBWLI 4LCSWH 4LCSWLI 4LBLWWLI 4LBLWWH 4LBMDH 4LBMDLI

Beam Angle WIDE 80° BEAM (LI) SINGLE WALL WASH (H) SINGLE WALL WASH (LI) LENSED WALL WASH (LI) LENSED WALL WASH (H) MEDIUM BEAM 45° CUTOFF 55° BEAM (H) MEDIUM BEAM 45° CUTOFF 50° BEAM (LI)

PS520185EN page 6
April 28, 2024 7:05 PM

LDRT4C | EU4C | 4LB

Connected Systems WaveLinx LITE – WLST Tilemount Sensor

WaveLinx LITE devices only compatible with the WaveLinx LITE system.

· Intuitive AndroidTM or Apple® iOS® app for basic system code compliant set up and configuration via Bluetooth · Up to 28 unique areas per project site (WaveLinx LITE Bluetooth network) · Up to 50 devices for an area, any one of 16 control zones, up to 6 occupancy sets, and custom lighting scenes · Automatic occupancy or vacancy, sensor sensitivity, daylight dimming, etc. configurable through the app · Refer to the WaveLinx system specifications for details

Device Security

Manual Dimmer

Occupancy Sensor

Daylighting Control

Manually Switched ON/OFF

Tuning Control

Lumen Maintenance Control

Scenes

WaveLinx LITE WLST Tilemount Wiring Diagram

WaveLinx LITE Bluetooth Enabled System

120-277 VAC

Black (Hot) White (Neutral)

Control module (MSP3IVMVDC1EP)

Pink (Dimming) Purple (Dimming) Blue (Not Switched) White (Neutral)

0-10V DImming Driver

MyApps
Secure Portal
Site Initiation, Data Backup & Site Transfer

Includes switchleg (Blue load out wire) and 0-10V to each fixture controlled

WaveLinx Lite Tilemount Sensor Kit control module
(MSP3IVMVDC1EP) (included)

54″ Plenum cable (5140-000123-00)
(included)

WaveLinx LITE Mobile Application

120-277 VAC 3A downlights with 0-10V control

ceiling tile

ceiling tile

WaveLinx Lite Sensor and Mounting Trim (included)

WaveLinx LITE Ambient

WaveLinx LITE Integrated Ambient

WaveLinx LITE Tilemount Sensor Kit

WaveLinx LITE Wallstation

WaveLinx LITE Integrated Industrial

WaveLinx LITE Integrated
Parking Garage

WaveLinx PRO Wireless ­ WPST Tilemount Sensor

WaveLinx PRO devices only compatible with the WaveLinx PRO system.

· WaveLinx PRO Wireless functionality configures zones and customizes settings from one secure mobile app · Automatic code commissioning that meets the strictest codes · Fixtures and sensors integrate with Wireless Area Controller, Wall Stations, and Control Devices · Stand-Alone Offices or Entire Building Network Installations

++ +

Downlights with tilemount sensor wireless communication
Highly efficient LED fixtures

WaveLinx Area Controller
Provides centralized coordination of multiple
area control options

Wireless Wall Station/Receptacle
Provides customized wireless control of each area

Mobile Applications
Provides personalized, local control from a tablet or smartphone

WaveLinx mobile app settings

Manual Dimmer

Occupancy Sensor

Lumen Maintenance Control

Daylighting Control

Receptacle Control

Tuning Control

Scheduling

Manually Switched ON/OFF

Demand Response

WaveLinx PRO WPST Tilemount Wiring Diagram

120-277 VAC

Black (Hot) White (Neutral)

Control module (MSP3IVMVDC1EP)

Pink (Dimming) Purple (Dimming) Blue (Not Switched) White (Neutral)

0-10V DImming Driver

Includes switchleg (Blue load out wire) and 0-10V to each fixture controlled

WaveLinx Lite Tilemount Sensor Kit control module
(MSP3IVMVDC1EP) (included)

54″ Plenum cable (5140-000123-00)
(included)

120-277 VAC 3A downlights with 0-10V control

ceiling tile

ceiling tile

WaveLinx Sensor and Mounting Trim (included)

WaveLinx CORE Building Management Integration

BACnet/IP Public (REST) API

Desktop/Laptop with web browser (hardware provided
by user)

WaveLinx CORE

Third Party system (hardware provided by others) Building LAN
Touchscreen

BACnet Router1 (hardware provided by others)
PoE Power

WaveLinx Area
Controller

Smartphone with WaveLinx app

used for system

setup and

personal control

Area or Room

(49 + 1 construction area)

Area or Room
(49 + 1 construction area)

Area or Room
(49 + 1 construction area)

120-347V 20A PRO Dimming Switchpacks

PRO Occupancy Ceiling Sensor

WaveLinx PRO controlled devices
(up to 200 devices per WAC2 – 150 devices best practice) – see Note

PRO Controlled Receptacle

PRO Wallstation

WaveLinx PRO enabled Indoor Fixture

WaveLinx PRO enabled Outdoor Fixture

KEY
Wi-Fi Signal
IEEE 802.15.4
Note: Performance based on second generation WaveLinx Area Controller (WAC2). WaveLinx CORE Pro shown in this illustration. WaveLinx CORE hardware can be either Pro, Enterprise or Virtual. 1 BACnet Router only required if WaveLinx CORE and third party BACnet client are on different subnets.

PS52075222 page 7
April 28, 2024 7:05 PM

LDRT4C | EU4C | 4LB

Connected Solutions WaveLinx LITE Wireless Node – WLN

WaveLinx LITE devices only compatible with the WaveLinx LITE system.

· Intuitive AndroidTM or Apple® iOS® app for basic system code compliant set up and configuration via Bluetooth · Up to 28 unique areas per project site (WaveLinx LITE Bluetooth network) · Up to 50 devices for an area, any one of 16 control zones, up to 6 occupancy sets, and custom lighting scenes · Refer to the WaveLinx system specifications for details
· Not available with BioUp or Tunable White

WaveLinx mobile app settings

Device Security

Manual Dimmer

Occupancy Sensor

Daylighting Control

Manually Switched ON/OFF

Tuning Control

Lumen Maintenance Control

Scenes

WaveLinx LITE Wireless Node (WLN) Wiring Diagram

D010 (500lm +)

D010 (250lm) & DE010

White (AC -N) Black (AC-L)

Red (Aux+)

Power Supply

WLN

Blue (Aux-) Grey (GND)

D010

Red (LED+) Blue (LED-)

Pink (Dim-) Purple (Dim+) Yellow (Aux+) Grey (Aux-) Pink (Dim-) Purple (Dim+)

Gree n (GND) White (AC -N) Black (AC-L)

WLN Grey (GND)

D010

Red (LED+) Blue (LED-)

WaveLinx LITE Bluetooth Enabled System
MyApps
Secure Portal
Site Initiation, Data Backup & Site Transfer
WaveLinx LITE Mobile Application

120-277 VAC 3A downlights with 0-10V control

WaveLinx LITE Ambient

WaveLinx LITE Integrated Ambient

WaveLinx LITE Tilemount Sensor Kit

WaveLinx LITE Wallstation

WaveLinx LITE Integrated Industrial

WaveLinx LITE Integrated
Parking Garage

WaveLinx PRO Wireless Node – WPN

WaveLinx PRO devices only compatible with the WaveLinx PRO system.

· WaveLinx Wireless functionality configures zones and customizes settings from one secure mobile app · Automatic code commissioning that meets the strictest codes · Fixtures and sensors integrate with WaveLinx Area Controller, Wall Stations, and Control Devices · Stand-Alone Offices or Entire Building Network Installations

++ +

Downlights with wireless communication
Highly efficient LED fixtures

WaveLinx Area Controller
Provides centralized coordination of multiple
area control options

Wireless Wall Station/Receptacle
Provides customized wireless control of each area

Mobile Applications
Provides personalized, local control from a tablet or smartphone

WaveLinx mobile app settings

Manual Dimmer

Occupancy Sensor

Lumen Maintenance Control

Daylighting Control

Receptacle Control

Tuning Control

Scheduling

Manually Switched ON/OFF

Demand Response

WaveLinx PRO Wireless Node (WPN) Wiring Diagram

D010 (500lm +)

D010 (250lm) & DE010

White (AC -N) Black (AC-L)

Power Supply

Red (Aux+) Blue (Aux-)

Grey (GND)

WP N

D010

Red (LED+) Blue (LED-)

Pink (Dim-) Purple (Dim+) Yellow (Aux+) Grey (Aux-) Pink (Dim-) Purple (Dim+)

Gree n (GND) White (AC -N) Black (AC-L)

WPN Grey (GND)

D010

Red (LED+) Blue (LED-)

WaveLinx CORE Building Management Integration

BACnet/IP Public (REST) API

Desktop/Laptop with web browser
(hardware provided
by user)

Trellix Core

Third Party system
(hardware provided by others)
Building LAN
Touchscreen

BACnet Router1
(hardware provided by others)
PoE Power

WaveLinx Mobile App used for system setup and personal control

Wireless Area Controller

120-277 VAC 3A downlights with 0-10V control

PS52075222 page 8
April 28, 2024 7:05 PM

LDRT4C | EU4C | 4LB
Proven Research. Industry Recognized.

BioUp
Melanopic Lighting

See better

Feel better

Function better

BioUp
Melanopic Lighting

Brighter Days Darker Nights

See BioUp brochure for more details

ANSI/AINESSI/IRESPR-P4-646–2233
RECOMMENDED PRACTICE: SUPPORTING THE PHYSIOLOGICAL AND BEHAVIORAL EFFECTS OF LIGHTING IN INTERIOR DAYTIME ENVIRONMENTS
AN AMERICAN NATIONAL STANDARD

ANSI/IES RP-46-23 / TM18 published March 2024 based on over 40 years of research.

BioUp solutions maximize WELL points for Circadian Lighting Design (L03):

125705EEMMLL 123560MLeulxanMop-EicD-EI DI

180 EML 163 M-EDI

“…circadian clock synchronization is paramount

48″

Use BioUp to achieve Equivalent Melanopic Lux (EML) thresholds

48″

to the body’s efficient and appropriate

for circadian design and earn

functioning.” ­ TM18

nearly 20% of WELL building lighting points.

MDER, M-EDI and EML are key metrics used to quantify non-visual performance of indoor lighting systems.

30% boost Biological impact

The power of healthy daytime lighting in indoor settings
Melanopic lighting advances and office applications

See BioUp white paper for more details

compared to traditional LED sources

BioUp Static CCT LED @ ~83 CRI
MDER CRI

BioUp Dynamic MDER CRI

MDER – Melanopic Daylight Efficacy Ratio (MDER) measures the amount of light stimulating to the melanopsin receptors.

Standard 4000K LED
MDER = .62

BioUp 4000K LED
MDER = .82

2700K

0.45

3000K

0.50

3500K

0.57

4000K

0.65

5000K

0.79

–

–

0.43

95

–

–

0.57

94

0.71

90

0.71

90

0.84

87

0.84

87

1.00

84

1.00

84

380 400 420 440 460 480 500 520 540 560 580 600 620 640 660 680 700 720

Lamp Data

Melanopic Visual

380 400 420 440 460 480 500 520 540 560 580 600 620 640 660 680 700 720

Lamp Data

Melanopic Visual

BioUp enhances the LED spectrum with cyan light at 475nm increasing the biological impact of the light to enhance our circadian rhythm which regulates our sleep/wake cycle, daytime engagement, and mood ­
all without distorting visual color impression.

Static (non-tunable)
Static BioUp is used when simple Melanopic Lighting is desired at all times.

MDER = 0.71

MDER = 0.84

Arrow in graph shows BioUp spectrum boost is
at 475nm where nonvisual biological response
is enhanced.
MDER = 0.98

Dynamic – (Tunable)

Dynamic BioUp is used when Melanopic Lighting is desired to adjust during the day.

Evening

Daytime

MDER = 0.43

MDER = 0.98

380 400 420 440 460 480 500 520 540 560 580 600 620 640 660 680 700 720

Lamp Data

Melanopic Visual

380 400 420 440 460 480 500 520 540 560 580 600 620 640 660 680 700 720

Lamp Data

Melanopic Visual

380 400 420 440 460 480 500 520 540 560 580 600 620 640 660 680 700 720

Lamp Data

Melanopic Visual

3500K

or

4000K

or

Cyan light component always present

5000K

Dimming

Control 0%

Intensity

100%

no CCT control needed

380 400 420 440 460 480 500 520 540 560 580 600 620 640 660 680 700 720

Lamp Data

Melanopic

Visual

380 400 420 440 460 480 500 520 540 560 580 600 620 640 660 680 700 720

Lamp Data

Melanopic

Visual

Warmer CCT Without Cyan content

CCT Control

warm 2700K

2700K ­ 5000K
CCT

Cooler Light With Cyan content
cool 5000K

Dimming

Control 0%

Intensity

100%

Control with Wavelinx, 2ch 0-10V, or DALI

PS52075222 page 9
April 28, 2024 7:05 PM

LDRT4C | EU4C | 4LB

Multi-line Order Information
SAMPLE ORDER NUMBER: LDRT4C10D010TRIEM14
Invoice will indicate separate fixture components (housing, trim, module) and may ship from multiple CLS facilities in separate cartons.

Single line Ordering Information Option

Domestic Preferences (1)
[Blank]=Standard TAA=Trade Agreements Act

Housing
LDRT4C=LED Downlight 4″ Nominal Aperture LDRT4CCP=LED Downlight 4″ Nominal Aperture, Chicago Plenum

08=800 lumens 10=1000 lumens 15=1500 lumens

Lumens (2)
20=2000 lumens (3) 25=2500 lumens (3) 30=3000 lumens (3)

35=3500 lumens (3) 40=4000 lumens (3) 45=4500 lumens (3)

Color Control
Blank=W2N or BioUp D2W=Dim to warm, 800-2500, 3500-4500 lumens

Driver for D2W (Specify from Driver column.)
D010=0-10V Dimming, 1% to 100%, 120V-277V, D2W=800-2500 lumens 1D010=0-10V Dimming, 1% to 100%, 120V, D2W=3500-4500 lumens 2D010=0-10V Dimming, 1% to 100%, 277V, D2W=3500-4500 lumens 3D010=0-10V Dimming, 1% to 100%, 347V dedicated drivers, D2W=800 to 2500 lumens, 3500 and above use step down transformer and dedicated driver 1 driver: D2W=800-2500 lumens; 2 drivers: D2W=3500-4500 lumens
D010TR=0-10V (120-277V) or Phase-Cut (120V) dimming, 5-100%, D2W=800-2500 lumens 1D010TR=0-10V or Phase-Cut Dimming, 5% to 100%, 120V, D2W=3500-4500 lumens 2D010TR=0-10V Dimming, 5% to 100%, 277V, D2W=3500-4500 lumens 3D010TR=0-10V Dimming, 5% to 100% 347V step down transformer, D2W=800-2500 & 3500-4500 lumens 1 driver: D2W=800-2500 lumens; 2 drivers: D2W=3500-4500 lumens
DE010=0-10V Dimming, 0% to 100%, 120V-277V, D2W=800-2500 lumens / W2N=1000 lumens 1DE010=0-10V Dimming, 0% to 100%, 120V, D2W=3500-4500 lumens / W2N=1500-3500 lumens 2DE010=0-10V Dimming, 0% to 100%, 277V, D2W=3500-4500 lumens / W2N=1500-3500 lumens 3DE010=0-10V Dimming, 0% to 100%, 347V step down transformer, D2W=800-2500 & 3500-4500 lumens / W2N=1000-3500 lumens 1 driver: D2W=800-2500 lumens; 2 drivers: D2W=3500-4500 lumens
D5LT=Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 120V-277V, D2W=800-2500 lumens / W2N=1000 lumens 1D5LT=Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 120V, D2W=3500-4500 lumens / W2N=1500-3500 lumens 2D5LT=Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 277V, D2W=3500-4500 lumens / W2N; 1500-3500 lumens 3D5LT=Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 347V step down transformer, D2W=800-2500 & 3500-4500 lumens / W2N=1000-3500 lumens 1 driver: D2W=800-2500 lumens; 2 drivers: D2W=3500-4500 lumens
DMX=DMX/RDM Logarithmic Dimming, 0% to 100%, 120V-277V, D2W=800-2500 lumens (5) 1DMX=DMX/RDM Logarithmic Dimming, 0% to 100%, 120V, D2W=3500-4500 lumens (5) 2DMX=DMX/RDM Logarithmic Dimming, 0% to 100%, 277V, D2W=3500-4500 lumens (5) 3DMX=DMX/RDM Logarithmic Dimming, 0% to 100%, 347V step down transformer, D2W=800-2500 & 3500-4500 lumens (5) 1 driver: D2W=800-2500 lumens; 2 drivers: D2W=3500-4500 lumens
DMXC5=DMX/RDM Logarithmic Dimming, 0% to 100%, 120V-277V, RJ45 Connection, D2W=800-2500 lumens (5) 1DMXC5=DMX/RDM Logarithmic Dimming, 0% to 100%, 120V, RJ45 Connection, D2W=3500-4500 & 7000 lumens (5) 2DMXC5=DMX/RDM Logarithmic Dimming, 0% to 100%, 277V, RJ45 Connection, D2W=3500-4500 & 7000 lumens (5) 3DMXC5=DMX/RDM Logarithmic Dimming, 0% to 100%, 347V step down transformer, RJ45 Connection, D2W=800-2500 & 3500-4500 lumens (5) 1 driver: D2W=800-2500 lumens; 2 drivers: D2W=3500-4500 lumens
DLE=Lutron Ecosystem dimming 1% to 100%, 120V-277V, D2W=800-2500 lumens 1DLE=Lutron Ecosystem dimming 1% to 100%, 120V, D2W=3500-4500 lumens 2DLE=Lutron Ecosystem dimming 1% to 100%, 277V, D2W=3500-4500 lumens 3DLE=Lutron Ecosystem dimming 1% to 100%, 347V with step down transformer, D2W=800-2500 & 3500-4500 lumens 1 driver: D2W=800-2500 lumens; 2 drivers: D2W=3500-4500 lumens
DLV=Low voltage dimming driver (1-100%) for use with DLVP system, D2W=800-2500 lumens (6)
Driver for Tunable White
DE010W2N2765=Tunable white 2700-6500K, 0-10V Dimming, 0% to 100%, 120-277V, 1000 lumens 1DE0102765=Tunable white 2700-6500K, 120V, 0-10V Dimming, 0% to 100%, 1500-3500 lumens 2DE0102765=Tunable white 2700-6500K, 120V, 0-10V Dimming, 0% to 100%, 1500-3500 lumens 3DE0102765=Tunable white 2700-6500K, 347V with step down transformer, 0-10V Dimming, 0% to 100%, 1000-3500 lumens 1 driver: 1000-3500 lumens
DE010W2N2050=Tunable white 2000-5000K, 0-10V Dimming, 0% to 100%, 120-277V, 1000 lumens 1DE0102050=Tunable white 2000-5000K, 120V, 0-10V Dimming, 0% to 100%, 1500-3500 lumens 2DE0102050=Tunable white 2000-5000K, 277V, 0-10V Dimming, 0% to 100%, 1500-3500 lumens 3DE0102050=Tunable white 2000-5000K, 347V with step down transformer, 0-10V Dimming, 0% to 100%, 1000-3500 lumens 1 driver: 1000-3500 lumens
D5LTW2N2765=Tunable white 2700-6500K, 120V-277V Fifth Light® (DALI T6) Dimming, 0% to 100%, 120-277V, 1000 lumens 1D5LTW2N2765=Tunable white 2700-6500K, 120V Fifth Light® (DALI T6) Dimming, 0% to 100%, 1500-3500 lumens 2D5LTW2N2765=Tunable white 2700-6500K, 277V Fifth Light® (DALI T6) Dimming, 0% to 100%, 1500-3500 lumens 3D5LTW2N2765=Tunable white 2700-6500K, 347V Fifth Light® (DALI T6) Dimming, 0% to 100%, 1000-3500 lumens 1 driver: 1000-3500 lumens

Information below for reference only. Remote driver &
plug in driver
800-2500 with D2W
800-2500 with D2W
800-2500 with D2W
800-2500 with D2W
800-2500 with D2W
800-2500 with D2W
800-2500 with D2W
800-2500 with D2W (Not offered with plug in driver)
Remote driver limited to 1000 lumens, Plug in driver 1000-3500 lumens
Remote driver limited to 1000 lumens, Plug in driver 1000-3500 lumens
Remote driver limited to 1000 lumens, Plug in driver 1000-3500 lumens

Continued on next page.
PS52075222 page 10
April 28, 2024 7:05 PM

LDRT4C | EU4C | 4LB

Multi-line Order Information (continued)

D5LTW2N2050=Tunable white 2000-5000K, 120V-277V Fifth Light® (DALI T6) Dimming, 0% to 100%, 120-277V, 1000 lumens 1D5LTW2N2050=Tunable white 2000-5000K, 120V Fifth Light® (DALI T6) Dimming, 0% to 100%, 1500-3500 lumens 2D5LTW2N2050=Tunable white 2000-5000K, 277V Fifth Light® (DALI T6) Dimming, 0% to 100%, 1500-3500 lumens 3D5LTW2N2050=Tunable white 2000-5000K, 347V with step down transformer Fifth Light® (DALI T6) Dimming, 0% to 100%, 1000-3500 lumens 1 driver: 1000-3500 lumens
Driver for BioUp
DE010B2750=BioUp tunable white 2700-5000K, 0-10V Dimming, 0% to 100%, 120-277V 800 lumens 1DE010B2750= BioUp tunable white 2700-5000K, 120V, 0-10V Dimming, 0% to 100%, 1000-2500 lumens 2DE010B2750= BioUp tunable white 2700-5000K, 277V, 0-10V Dimming, 0% to 100%, 1000-2500 lumens 3DE010B2750= BioUp tunable white 2700-5000K, 347V with step down transformer, 0-10V Dimming, 0% to 100%, 800-2500 lumens 1 driver: 800-2500 lumens
DE010B35, DE010B40, DE010B50 = BioUp Static White (choose 3500K, 4000K or 5000K), 0-10V Dimming, 0% to 100%, 120-277V 800 lumens 1DE010B35, 1DE010B40, 1DE010B50 = BioUp Static White (choose 3500K, 4000K or 5000K), 120V, 0-10V Dimming, 0% to 100%, 1000-2500 lumens 2DE010B35, DE010B40, DE010B50 = BioUp Static White (choose 3500K, 4000K or 5000K), 277V, 0-10V Dimming, 0% to 100%, 1000-2500 lumens 3DE010B35, 3DE010B40, 3DE010B50 = BioUp Static White (choose 3500K, 4000K or 5000K) 347V with step down transformer, 0-10V Dimming, 0% to 100%, 800-2500 lumens; 1 driver: 800-2500 lumens
D5LTB2750=BioUp Tunable white 2700-5000K, 120V-277V Fifth Light® (DALI T6) Dimming, 0% to 100%, 120-277V 800 lumens 1D5LTB2750= BioUp Tunable white 2700-5000K, 120V Fifth Light® (DALI T6) Dimming, 0% to 100%, 1000-2500 lumens 2D5LTB2750= BioUp Tunable white 2700-5000K, 277V Fifth Light® (DALI T6) Dimming, 0% to 100%, 1000-2500 lumens 3D5LTB2750= BioUp Tunable white 2700-5000K, 347V with step down transformer Fifth Light® (DALI T6) Dimming, 0% to 100%, 800-2500 lumens 1 driver: 800-2500 lumens
D5LTB35, D5LTB40, D5LTB50= BioUp Static White (choose 3500K, 4000K or 5000K), 120V-277V Fifth Light® (DALI T6) Dimming, 0% to 100%, 120-277V 800 lumens 1D5LTB35, 1D5LTB40, 1D5LTB50= BioUp Static White (choose 3500K, 4000K or 5000K), 120V Fifth Light® (DALI T6) Dimming, 0% to 100%, 1000-2500 lumens 2D5LTB35, 2D5LTB40, 2D5LTB50= BioUp Static White (choose 3500K, 4000K or 5000K), 277V Fifth Light® (DALI T6) Dimming, 0% to 100%, 1000-2500 lumens 3D5LTB35, 3D5LTB40, 3D5LTB50= BioUp Static White (choose 3500K, 4000K or 5000K), 347V with step down transformer Fifth Light® (DALI T6) Dimming, 0% to 100%, 800-2500 lumens 1 driver: 800-2500 lumens

Remote driver limited to 1000 lumens, Plug in driver 1000-3500 lumens
Remote driver limited to 800 lumens, Plug in driver 800-2500 lumens
Remote driver limited to 800 lumens, Plug in driver 800-2500 lumens
Remote driver limited to 800 lumens, Plug in driver 800-2500 lumens
Remote driver limited to 800 lumens, Plug in driver 800-2500 lumens

Driver Options

Options (6) (29) (30) (32)

Blank=Integral driver R=Remote driver (order remote driver separately) (6) PD=Plug in Driver (8)

EMBOD=Bodine® Emergency Module with Remote Test Switch (10) EMBOD6ST=Bodine® 6W Self Test Emergency Module with Remote Test Switch EM7=7W Emergency Module with Remote Test Switch EM14=14W Emergency Module with Remote Test Switch EMBOD7ST=Bodine® Self Test Emergency Module (10)

EMV7=7W Low Voltage Emergency Module with Remote Test Switch (7) EMV14=14W Low Voltage Emergency Module with Remote Test Switch (7) ETRD=Emergency transfer device (31) WPST=Factory installed WaveLinx PRO Sensor Kit (11) (13) WLST=Factory installed WaveLinx LITE Sensor Kit (11) (12) WPN = WaveLinx PRO Wireless Node without sensor (15) (36)
WLN = WaveLinx LITE Wireless Node without Sensor (not compatible with Tuneable White) (35) (36)

SAMPLE ORDER NUMBER: EU4C10209035

Domestic Preferences (1)
[Blank]=Standard TAA=Trade Agreements Act

Power Module
EU4C=4-inch Universal LED Module

Lumen Levels (2)
BioUp Tunable white 0820B=800, 1000, 1500, 2000 lumens, 90 CRI (33) 2500B=2500 lumens, 90 CRI (3)
Dim 2 Warm 08259030D2W=800-2500 lumen, 90 CRI, Dim 2 Warm (1 driver and 1 LED) 35459030D2W=3500-4500 lumen, 90 CRI, Dim 2 Warm (2 drivers and LEDs)
Tunable white 1030W2N902765=1000, 1500, 2000, 2500, 3000 lumens, 90 CRI, tunable white 2700K-6500K 1030W2N902050=1000, 1500, 2000 , 2500, 3000 lumens, 90 CRI, tunable white 2000K-5000K 35W2N902765=3500 lumens, 90 CRI, tunable white 2700K-6500K (3) 35W2N902050=3500 lumens, 90 CRI, tunable white 2000K- 5000K (3)

Color
9035= Static 3500K 9040=Static 4000K 9050=Static 5000K 902750=BioUp Tunable White 2700K-5000K

Continued on next page.
PS52075222 page 11
April 28, 2024 7:05 PM

Multi-line Order Information (continued)
SAMPLE ORDER NUMBER: 4LBM2H

LDRT4C | EU4C | 4LB

Trim 4LB=4″ LED

Reflector

N=Narrow, Spun Aluminum (8) (23) M=50° Cutoff, Medium Beam Reflector, Spun Aluminum MD=45° Cutoff, Medium Beam Reflector, Spun Aluminum W=Wide, Spun Aluminum S=Shallow, Spun Aluminum PS=Non-Conductive Shallow (dead front), white (16) (17) CS=Cast Shallow, Die Cast Aluminum BA=Spun Aluminum Baffle (24)

Wall Wash SWN=Single wall wash, spun aluminum DWN=Double wall wash, spun aluminum CW=Corner wall wash, spun aluminum LSWW=Lensed single wall wash, spun aluminum LDWW=Lensed double wall wash, spun aluminum

Flange
0=White polymer trim ring 1=Self flanged (18) 2=White painted self flanged

REQUIRED if Remote Driver (R) is specified SAMPLE ORDER NUMBER: RC10010D010TREM7

Finish
LI=Specular Clear (20) H=Semi-Specular Clear (20) WMH=Warm Haze (20) WH=Wheat (20) GPH=Graphite Haze (20) B=Specular Black (20) MW=Matte White MB=Matte Black (21) MMS=Matte Metallic Silver (21)

Domestic Preferences (1)
[Blank]=Standard TAA=Trade Agreements Act

Remote Drivers (6)
RC100=Remote 100ft RC75=Remote 75ft RC50=Remote 50ft RC25=Remote 25ft RC15=Remote 15ft RC5=Remote 5ft RC2=Remote 2ft

Lumens (2) (14)

02=250 lumens 05=500 lumens 08=800 lumens 10=1000 lumens 15=1500 lumens

20=2000 lumens 25=2500 lumens 30=3000 lumens 35=3500 lumens 40=4000 lumens 45=4500 lumens

[Blank]=W2N or BioUp D2W=Dim to warm

Color Control

Driver
D010=0-10V Dimming, <1% to 100%, 120V-277V D2W; 800-2500 lumens 3D010 = 0-10V Dimming, <1% to 100%, 347V dedicated driver D2W; 800-2500 lumens
D010TR=0-10V (120-277V) or Phase-Cut (120V) dimming, 5-100%, D2W; 800-2500 lumens 3D010TR = 0-10V Dimming, 347V with step down transformer, D2W; 800-2500 lumens
DE010=0-10V Dimming, 0% to 100%, 120V-277V, D2W; 800-2500 lumens 3DE010 = 0-10V Dimming, 0% to 100%, 347V with step down transformer, D2W; 800-2500 lumens
D5LT=Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 120V-277V, D2W; 800-2500 lumens 3D5LT = Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 347V with step down transformer, D2W; 800-2500 lumens
DMX=DMX/RDM Logarithmic Dimming, 0% to 100%, 120V-277V, D2W; 800-2500 lumens (5) 3DMX = DMX/RDM Logarithmic Dimming, 0% to 100%, 347V with step down transformer, D2W; 800-2500 lumens (5)
DMXC5=DMX/RDM Logarithmic Dimming, 0% to 100%, 120V-277V, RJ45 connection, D2W; 800-2500 lumens (5) 3DMXC5 = DMX/RDM Logarithmic Dimming, 0% to 100%, 347V with step down transformer, RJ45 connection, D2W; 800-2500 lumens (5)
DLE=Lutron Ecosystem dimming 1% to 100%, 120V-277V, 25′ Max remote length, D2W; 800-2500 lumens 3DLE = Lutron Ecosystem dimming 1% to 100%, 347V with step down transformer, 25′ Max remote length, D2W; 800-2500 lumens
DLV=Low voltage dimming driver (1-100%) for use with DLVP system, D2W; 800-2500 lumens (6) Driver for Tuneable White
DE010W2N2765=Tunable white 0-10V Dimming, 2700K-6500K, 0% to 100%, 120V-277V, 1000 lumens DE010W2N2050=Tunable white 0-10V Dimming, 2700K-6500K, 0% to 100%, 120V-277V, 1000 lumens D5LTW2N2765=Tunable white Fifth Light® (DALI T6) Dimming, 0% to 100%, 2700K-6500K, 120V-277V, 1000 lumens D5LTW2N2050=Tunable white Fifth Light® (DALI T6) Dimming, 0% to 100%, 2000K-5000K, 120V-277V, 1000 lumens
Driver for BioUp D5LTB2750=BioUp Tunable white Fifth Light® (DALI T6) Dimming, 0% to 100%, 2700K-5000K, 120V-277V, 800 lumens DE010B2750=BioUp Tunable white 0-10V Dimming, 2700K-5000K, 0% to 100%, 120V-277V, 800 lumens DE010B35/B40/B50=BioUp Tunable white 0-10V Dimming, (choose 3500K, 4000K or 5000K), 0% to 100%, 120-277V, 800 lumens D5LTB35/B40/B50=BioUp Tunable white Fifth Light® (DALI T6) Dimming, 0% to 100%, (choose 3500K, 4000K or 5000K), 120V-277V, 800 lumens

Specify from Driver column. Information below for reference only. D2W 800-2,500
800-2,500
800-2,500
800-2,500
800-2,500
800-2,500
800-2,500 800-2,500

Continued on next page.
PS52075222 page 12
April 28, 2024 7:05 PM

Multi-line Order Information (continued)

LDRT4C | EU4C | 4LB

Options (6) (10) (30)

EMBOD=Bodine® Emergency Module with Remote Test Switch (10) EMBOD6ST=Bodine® 6W Self Test Emergency Module with Remote Test Switch EM7=7W Emergency Module with Remote Test Switch EM14=14W Emergency Module with Remote Test Switch

EMBOD7ST=Bodine® Self Test Emergency Module with Remote Test Switch EMV7=7W Low Voltage Emergency Module with Remote Test Switch (7) EMV14=14W Low Voltage Emergency Module with Remote Test Switch (7) ETRD=Emergency transfer device (31)

Controls
WPST=Factory installed WaveLinx PRO Sensor Kit (11) (13) WLST=Factory installed WaveLinx LITE Sensor Kit (11) (12) WPN = WaveLinx PRO Wireless Node without sensor (15) (36) WLN = WaveLinx LITE Wireless Node without Sensor (not compatible with Tuneable White) (35) (36)

TRM4P=White metal trim ring (26) LGSKT4IP66=IP66 Gasket Kit DT4RF=4 inch frosted acrylic ring (28)

Accessories (Order separately) (25)

Connected Lighting Systems (6) (11) WPST=Field installed WaveLinx sensor Kit (13) WLST=Field installed WaveLinx LITE Sensor Kit (12)

Transformers H347=H347 for 98CRI 4000 lumens and below; D2W 4500 lumens and below; W2N 4000 lumens and below H347200=347 to 120V Step Down Transformer, 200VA

Notes: 1. Only product configurations with these designated prefixes are built to be compliant with the Buy American Act of 1933 (BAA) or Trade Agreements Act of 1979 (TAA), respectively. Please refer to DOMESTIC PREFERENCES website for more information. Components shipped separately may be separately analysed under domestic preference requirements. Offered with spun aluminum narrow (N), medium (M) and wide (W) trims.
2. Nominal Lumens will vary depending on selected color, CRI, driver and reflector finish.
3. Product is marked spacing. Reference table on page 4 for the spacing details.
5. DMX fixtures default to full on upon loss of DMX signal.
6. Not available with Chicago Plenum.
7. ULus listed only
8. Offered up to 2500 lumens with D2W and 3500 with W2N – D010, D5LT, DE010 up to 4500 lumens with 98 CRI – D010TR, DMX up to 3000 lumens with 98 CRI – DLE, DL2 up to 2500 lumens with 98 CRI 10. Not available for W2N
11. Refer to system specifications for additional information,features, and benefits. Order either factory installed option or accessory. Use with 0-10V driver.

12. WLST=WaveLinx LITE tilemount sensor kit for daylight dimming, PIR motion sensing, use with D010 only (Refer to WaveLinx LITE system specifications)
13. WPST=WaveLinx PRO wireless sensor kit for daylight dimming, PIR motion sensing, and optional RLTS – Real Time Location Services, use with 0-10V only.
14. IC rated up to 2000 lumens for 98 CRI, 2500 lumens for D2W and 1000 lumens for W2N 15. WPN = WaveLinx PRO wireless node provides luminaire-level control with scene and zone configuration without an integrated sensor; Connects wirelessly with daylight dimming sensor and PIR motion sensor if desired. Use with D010 or DE010 drivers only.
16. PS available in self-flanged MW finish only
17. Offered up to 2000 lumens
18. Flange is the same finish as the reflector
19. Requires knife edge ring accessory.
20. Anodized or spun reflectors
23. Offered with DLVP up to 2000 lumens with 98 CRI.
24. Black or white paint.
25. Accessories sold separately will be separately analyzed under domestic preference requirements. Consult factory for further information.

26. Order trim with polymer trim ring (Consult specification sheet for color ordering information and options).
29. If using remote driver order battery and controls with the remote driver. 30. 120V-277V 31.Used to bypass local control during outage. Must be used in conjunction with UL 1008 device (provided by others) 32. Non-IC 33. IC rated for 800 lumens 34. IC rated for 1000 lumens 35. WLN = WaveLinx LITE wireless node provides luminaire level control with scene and zone configuration without an integrated sensor; Connects wirelessly with daylight dimming sensor and PIR motion sensor if desired. Use with D010 or DE010 drivers only.
36. Not compatible with 347V or Chicago plenum.

Cooper Lighting Solutions 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.cooperlighting.com

© 2024 Cooper Lighting Solutions All Rights Reserved.
Specifications and dimensions subject to change without notice.

PS52075222 page 13
April 28, 2024 7:05 PM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>